AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

238-1570 WIRING GP-REFUELING PUMP S/N XAC1-UP PART OF 220-2520 PUMP AR-REFUELING AN ATTACHMENT 349D2 L


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 349D2 L EXCAVATOR XAC
 349D2 L Excavators XAC00001-UP (MACHINE) POWERED BY C13 Engine SEBP7452 349D2 L XAC   (2014)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-PLATFORM
336-5983 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
336-6195 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
WIRING GP-WINDOW WIPER
342-3108 WIRING GP-WINDOW WIPER
340-3897 INSTALLATION AR-RADIO
 

#SEBP74520400
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N XAC1-UP
PART OF 220-2520 PUMP AR-REFUELING
AN ATTACHMENT
i03087780 SEBP7452
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74520401
 

230-0961: WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1-UP
PART OF 356-2433 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02229274 SEBP7452
2300961 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6508 [6] CAP AS  
2. 418-7614 Y [1] HARNESS AS-WIRING (UNIT INJECTOR)  
3. 6V-8837 M [5] BOLT (M6X1X16-MM)  
4. 6V-8836 M [2] BOLT (M6X1X14-MM)  
5. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
6. 237-9960 [5] CLIP (LADDER)  
7. 3S-2093 [5] STRAP-CABLE  
8. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74520402
 

342-3108: WIRING GP-WINDOW WIPER

342-3108 WIRING GP-WINDOW WIPER
S/N XAC1-UP
AN ATTACHMENT
i03661330 SEBP7452
3423108 WIRING GP-WINDOW WIPER Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [14] STRAP-CABLE  
2. 342-3109 [1] HARNESS AS-WINDOW WIPER  
  3S-2093 [6] STRAP-CABLE  
  102-7965 [12] TERMINAL (FEMALE)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  111-4816 [1] PLUG-CONNECTOR (13-PIN)  
  121-1173 [8] TERMINAL (MALE)  
  125-4840 [1] WEDGE-PLUG LOCK (13-PIN)  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
 

#SEBP74520403
 

227-6044: DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N YAE1-264
PART OF 353-0500 DRIVE GP-FINAL
i02219641 SEBP7452
2276044 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4504 Y [1] MOTOR & MTG GP-TRAVEL  
2. 227-6045 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74520404
 

227-6045: DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N YAE1-264
PART OF 227-6044 DRIVE GP-FINAL
i02219800 SEBP7452
2276045 DRIVE GP-FINAL Parts scheme 2276045 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
4. 7M-8485 [2] SEAL-O-RING  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
12. 7Y-1473 B [1] SHIM (0.3-MM THK)  
13. 7Y-1474 B [1] SHIM (0.4-MM THK)  
14. 7Y-1475 B [1] SHIM (0.5-MM THK)  
15. 7Y-1476 B [1] SHIM (0.6-MM THK)  
16. 7Y-1477 B [1] SHIM (0.7-MM THK)  
17. 7Y-1478 B [1] SHIM (0.8-MM THK)  
18. 7Y-1479 B [1] SHIM (1-MM THK)  
19. 7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 200-3489 [1] HOUSING-MOTOR  
37. 200-3490 [1] HOUSING-GEAR  
38. 205-9025 [1] SEAL GP-DUO-CONE  
  205-9024 [2] RING-TORIC  
39. 227-6048 [12] WASHER (26X40X4-MM THK)  
40. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
41. 199-4582 [3] BEARING AS  
42. 095-0891 [7] PIN-SPRING  
43. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
44. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
45. 6V-8133 M [12] BOLT (M24X3X80-MM)  
46. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
47. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
48. 8C-5240 [1] SEAL-O-RING  
49. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
50. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
51. 8T-4240 [3] RING-RETAINING  
52. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP74520405
 

333-3036: DRIVE GP-FINAL

333-3036 DRIVE GP-FINAL -WITHOUT MOTOR
S/N XAC1-160; YAE265-273
PART OF 353-0528 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@521-3847@@@@@, @@@@@521-3848@@@@@
i04316228 SEBP7452
3333036 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 3E-2338 [2] PLUG-PIPE  
4. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 454-6929 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 227-6048 [12] WASHER (26X40X4-MM THK)  
37. 255-2272 [1] SEAL GP-DUO-CONE  
38. 333-3033 [1] HOUSING-MOTOR  
39. 333-3034 [1] HOUSING-GEAR  
40. 333-3035 [1] PLATE  
41. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
42. 199-4582 [3] BEARING AS  
43. 095-0891 [7] PIN-SPRING  
44. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
45. 4S-5924 [1] SEAL-O-RING  
46. 6V-8133 M [12] BOLT (M24X3X80-MM)  
47. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
50. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
51. 8C-5240 [1] SEAL-O-RING  
52. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
53. 451-2177 [20] WASHER-HARD (26X44X4-MM THK)  
54. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
55. 8T-4240 [3] RING-RETAINING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP74520406
 

353-0500: DRIVE GP-FINAL

353-0500 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N YAE1-264
PART OF 227-6042 POWER TRAIN AR
i04126949 SEBP7452
3530500 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)(NON-SEGMENTED)  
2. 227-6044 Y [1] DRIVE GP-FINAL (WITH MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74520407
 

353-0527: DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N XAC1-160; YAE265-273
PART OF 227-6042 POWER TRAIN AR
i04269576 SEBP7452
3530527 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 353-0528 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74520408
 

353-0528: DRIVE GP-FINAL

353-0528 DRIVE GP-FINAL -WITH MOTOR
S/N XAC1-160; YAE265-273
PART OF 353-0527 DRIVE GP-FINAL
i04273970 SEBP7452
3530528 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4504 Y [1] MOTOR & MTG GP-TRAVEL  
2. 333-3036 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74520409
 

460-4988: DRIVE GP-FINAL

460-4988 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N XAC161-UP; YAE274-10028
PART OF 227-6042 POWER TRAIN AR
ALSO AN ATTACHMENT
i06578138 SEBP7452
4604988 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 480-7428 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Caterpillar Parts SIS Catalog 349D2 L :

WIRING GP-QUICK COUPLER
336-6195 WIRING GP-QUICK COUPLER
WIRING GP-PLATFORM
336-5983 WIRING GP-PLATFORM
WIRING GP-PLATFORM
336-5983 WIRING GP-PLATFORM
WIRING GP-HAMMER
336-6227 WIRING GP-HAMMER
WIRING GP-GRADE CONTROL
299-3003 WIRING GP-GRADE CONTROL
WIRING GP-GRADE CONTROL
299-3000 WIRING GP-GRADE CONTROL
WIRING GP-FINE SWING
299-2856 WIRING GP-FINE SWING
WIRING GP-FAN
299-2606 WIRING GP-FAN
WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
WIRING GP-WINDOW WIPER
342-3108 WIRING GP-WINDOW WIPER
DRIVE GP-FINAL
227-6044 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6045 DRIVE GP-FINAL
DRIVE GP-FINAL
333-3036 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0500 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0527 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0528 DRIVE GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.