ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AID GP
STARTING MOTOR GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP74540370
300-9805: SENSOR GP-SPEED
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS#SEBP74540371
300-9806: SENSOR GP-SPEED
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS#SEBP74540372
234-5012: SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
S/N TXW1009-UP
PART OF 418-6531 SENSOR GP-ENGINE
S/N TXW1009-UP
PART OF 418-6531 SENSOR GP-ENGINE
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS#SEBP74540373
234-5013: SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
S/N TXW1009-UP
PART OF 418-6531 SENSOR GP-ENGINE
S/N TXW1009-UP
PART OF 418-6531 SENSOR GP-ENGINE
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS#SEBP74540374
256-6453: SENSOR-TEMPERATURE
256-6453 SENSOR-TEMPERATURE
S/N GAY1-UP
IP-2 PIN PASSIVE TEMPERATURE
PART OF 424-4763 LINES GP-FUEL, 493-8538 TANK & FILTER GP-HYDRAULIC
S/N GAY1-UP
IP-2 PIN PASSIVE TEMPERATURE
PART OF 424-4763 LINES GP-FUEL, 493-8538 TANK & FILTER GP-HYDRAULIC
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP74540375
368-8296: STARTING AID GP-ETHER
368-8296 STARTING AID GP-ETHER
S/N GAY1-UP
PART OF 439-1603 OPTION AR-COLD WEATHER
S/N GAY1-UP
PART OF 439-1603 OPTION AR-COLD WEATHER
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 276-8503 | [1] | FITTING AS | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 2. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 3. | 256-6881 | [1] | ATOMIZER GP-ETHER | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 4. | 339-6891 | [2] | STRAP-CABLE | |
| 5. | 339-7043 | [1] | SUPPORT | |
| 6. | 394-7556 | [1] | PLATE AS | |
| 7. | 135-8575 | [4] | BOLT AS | |
| 8. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 9. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 174-9169 E | TUBE (120-CM) | ||
| 7N-0296 A | [1] | CYLINDER AS-ETHER | ||
| (MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74540376
349-6536: STARTING MOTOR GP-ELECTRIC
349-6536 STARTING MOTOR GP-ELECTRIC
S/N TXW1009-UP
24-VOLT
PART OF 382-9014, 422-9432 STARTING MOTOR GP-ELECTRIC
S/N TXW1009-UP
24-VOLT
PART OF 382-9014, 422-9432 STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-0326 | [1] | CONNECTOR | |
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
| 4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
| 5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 3T-3423 | [1] | CUP | ||
| 3T-3424 | [1] | PLUG-FELT | ||
| 9G-4101 | [1] | BUSHING-END | ||
| 8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS | |
| 11. | 2J-8163 | [2] | SEAL-O-RING | |
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 14. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 15. | 8C-3089 | [1] | SEAL-O-RING | |
| 16. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 17. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 18. | 7L-2894 | [4] | GASKET | |
| 19. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 20. | 4M-1854 | [1] | SHAFT-LEVER | |
| 21. | 1H-1023 | [1] | SEAL-O-RING | |
| 22. | 2D-6392 | [1] | SEAL-O-RING | |
| 23. | 528-6787 | [1] | HOUSING AS-DRIVE | |
| 24. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 25. | 2H-3429 | [1] | RING-RETAINING | |
| 26. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 27. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 28. | 6N-3279 | [1] | INSULATOR | |
| 29. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 30. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
| 31. | 1H-2629 | [3] | STRIP-INSULATION | |
| 32. | 7M-0324 | [1] | COIL AS-FIELD | |
| 33. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 34. | 7F-3488 | [6] | SHOE-POLE | |
| 35. | 7M-8651 | [1] | ARMATURE AS | |
| 36. | 7M-0325 | [1] | INSULATOR | |
| 37. | 3T-9524 | [6] | BRUSH AS | |
| 38. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| (INCLUDES BUSHINGS & WASHERS) | ||||
| 40. | 3R-8801 | [1] | CLAMP | |
| 41. | 8F-1434 | [2] | LOCKWASHER | |
| 42. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 43. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 44. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 45. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 46. | 3T-9494 | [6] | SPRING | |
| 47. | 349-6255 | [1] | HOUSING AS | |
| 48. | 9G-4101 | [1] | BUSHING-END | |
| 49. | 3T-3424 | [3] | PLUG-FELT | |
| 50. | 3T-3423 | [3] | CUP | |
| 51. | 1M-9968 | [1] | BUSHING | |
| 53. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 54. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 55. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| 56. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 57. | 338-3453 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 3R-8801 | [1] | CLAMP | ||
| 58. | 352-7993 | [1] | KIT-SWITCH | |
| (INCLUDES SWITCH AS, COVER, BOLTS, ANCHOR & CLAMP) | ||||
| 59. | 351-8955 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74540377
382-9014: STARTING MOTOR GP-ELECTRIC
382-9014 STARTING MOTOR GP-ELECTRIC
S/N TXW1009-UP
24-VOLT, 50 MT, LH
PART OF 415-1858 ENGINE AR-COMPLETE
CANNOT BE USED WITH RH STARTER APPLICATIONS
S/N TXW1009-UP
24-VOLT, 50 MT, LH
PART OF 415-1858 ENGINE AR-COMPLETE
CANNOT BE USED WITH RH STARTER APPLICATIONS
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 249-2943 | [1] | STUD (3/8-16-THD) | |
| 3. | 349-6536 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 4. | 355-1642 Y | [1] | HARNESS AS-SWITCH | |
| 5. | 382-9015 | [1] | CABLE AS | |
| 6. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 7. | 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74540378
422-9432: STARTING MOTOR GP-ELECTRIC
422-9432 STARTING MOTOR GP-ELECTRIC
S/N TXW1009-2635
24-VOLT
PART OF 415-1858, 467-2588, 484-3457 ENGINE AR-COMPLETE
CANNOT BE USED WITH APPLICATIONS WITH SOUND PANEL
S/N TXW1009-2635
24-VOLT
PART OF 415-1858, 467-2588, 484-3457 ENGINE AR-COMPLETE
CANNOT BE USED WITH APPLICATIONS WITH SOUND PANEL
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 349-6536 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 3. | 355-1642 Y | [1] | HARNESS AS-SWITCH | |
| 4. | 382-9015 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 9X-9825 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(22-CM) | |||
| 5. | 129-3172 | [2] | STUD-MOUNTING (3/8-16X1.564-IN) | |
| 6. | 8M-7145 | [1] | WASHER (10.2X28.5X5-MM THK) | |
| 7. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74540379
422-9432: STARTING MOTOR GP-ELECTRIC
422-9432 STARTING MOTOR GP-ELECTRIC
S/N TXW2636-UP
24-VOLT
PART OF 484-3457 ENGINE AR-COMPLETE
CANNOT BE USED WITH APPLICATIONS WITH SOUND PANEL
S/N TXW2636-UP
24-VOLT
PART OF 484-3457 ENGINE AR-COMPLETE
CANNOT BE USED WITH APPLICATIONS WITH SOUND PANEL
For full view, you need register
Parts for your 390F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 478-9867 CY | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 3. | 355-1642 Y | [1] | HARNESS AS-SWITCH | |
| 4. | 382-9015 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 9X-9825 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(22-CM) | |||
| 5. | 129-3172 | [2] | STUD-MOUNTING (3/8-16X1.564-IN) | |
| 6. | 8M-7145 | [1] | WASHER (10.2X28.5X5-MM THK) | |
| 7. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Instructions for Installing Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Troubleshooting Guide for the Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat<SUP>®</SUP> Grade Control, for 374F and 390F {5736}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat® Grade Control, for 374F and 390F {5736}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat® Grade Control, for 374F and 390F {5736}
Technical Information Bulletin
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Specifications
Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
Sensor Signal (Analog, Passive) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Disassembly and Assembly
Inlet Air Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Position Sensor - Remove and Install - 374F and 390F Stick and Boom Rotary Position Sensor Remove and Install
390F Excavator Machine Systems
390F Excavator Machine Systems
Service Magazine
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422}
Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422}
Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422}
