AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

572-3052 EDGE AS-CUTTING S/N GAY1-UP 2220-MM (87.4-IN) WIDE 390F L EXCAVATOR


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
GUARD GP
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
AIR CONDITIONER GP

EXCAVATOR 390F L EXCAVATOR GAY
 390F L Excavator GAY00001-UP (MACHINE) POWERED BY C18 Engine SEBP7454 390F L GAY   (2014)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
EDGE AS-CUTTING
572-3052 EDGE AS-CUTTING
PROTECTOR GP-BUCKET
357-2686 PROTECTOR GP-BUCKET
PROTECTOR GP-SIDE BAR
357-2688 PROTECTOR GP-SIDE BAR
TIP GP-PENETRATION
350-6750 TIP GP-PENETRATION
TIP GP-PENETRATION PLUS
195-9186 TIP GP-PENETRATION PLUS
TIP GP-PENETRATION PLUS
229-7163 TIP GP-PENETRATION PLUS
TIP GP-PENETRATION PLUS
368-3869 TIP GP-PENETRATION PLUS
 

#SEBP74540900
 

572-3052: EDGE AS-CUTTING

572-3052 EDGE AS-CUTTING
S/N GAY1-UP
2220-MM (87.4-IN) WIDE
i07619991 SEBP7454
5723052 EDGE AS-CUTTING Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-9770 [1] PLATE  
2. 368-3800 [4] ADAPTER (X-150, 2-STRAP, CENTER)(2-STRAP)  
3. 368-3801 [1] ADAPTER (150)(RH)  
4. 368-3802 [1] ADAPTER (150)(LH)  
 

#SEBP74540901
 

503-7121: GUARD GP-CYLINDER

503-7121 GUARD GP-CYLINDER
S/N GAY1-UP
PART OF 507-1316, 507-1317 OPTION AR-LINKAGE
i06712917 SEBP7454
5037121 GUARD GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 463-5706 [1] GUARD  
2. 198-4776 [2] WASHER-HARD (8.8X20X8-MM THK)  
3. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
 

#SEBP74540902
 

357-2686: PROTECTOR GP-BUCKET

357-2686 PROTECTOR GP-BUCKET
S/N GAY1-UP
FOR USE WITH BUCKETS WITH 50-MM THICK SIDEBARS
i07120105 SEBP7454
3572686 PROTECTOR GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 326-3405 [1] SIDECUTTER  
2. 326-3406 [1] SIDECUTTER  
3. 2J-3507 [10] NUT-FULL (1-8-THD)  
4. 3K-5234 [10] WASHER-HARD (28X49X6-MM THK)  
5. 7X-0410 [10] BOLT (1-8X4-IN)  
 

#SEBP74540903
 

357-2688: PROTECTOR GP-SIDE BAR

357-2688 PROTECTOR GP-SIDE BAR -BUCKET
S/N GAY1-UP
PART OF 331-1252 BUCKET & ADJUSTER GP, 377-2890 BUCKET AR-SEVERE SERVICE ROCK
FOR USE WITH BUCKETS WITH 60-MM THICK SIDEBARS
i05812116 SEBP7454
3572688 PROTECTOR GP-SIDE BAR Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-0999 [8] RETAINER AS (G.E.T.)  
2. 286-2140 B [8] KIT-SHIM PACK  
    (INCLUDES 4 SHIMS)
3. 329-5957 [4] PROTECTOR (SIDE BAR)  
4. 357-2689 [8] PIN (G.E.T.)  
  B   USE AS REQUIRED
 

#SEBP74540904
 

350-6750: TIP GP-PENETRATION

350-6750 TIP GP-PENETRATION
S/N GAY1-UP
PART OF 374-8291 BUCKET AR-EXTREME SERV SPADE, 377-2890 BUCKET AR-SEVERE SERVICE ROCK
i05812087 SEBP7454
3506750 TIP GP-PENETRATION Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 453-3646 [1] TIP AS-PENETRATION PLUS  
  442-5418 [2] RETAINER-LOCK  
2. 310-2788 [1] KIT-PIN  
 

#SEBP74540905
 

195-9186: TIP GP-PENETRATION PLUS

195-9186 TIP GP-PENETRATION PLUS
S/N GAY1-UP
PENETRATION PLUS
PART OF 391-0826 BUCKET AR-GENERAL PURPOSE
i05662603 SEBP7454
1959186 TIP GP-PENETRATION PLUS Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-4708 [1] PIN  
2. 171-1709 [1] TIP-PENETRATION (J-700)  
3. 113-4709 [1] RETAINER AS  
 

#SEBP74540906
 

229-7163: TIP GP-PENETRATION PLUS

229-7163 TIP GP-PENETRATION PLUS -K-150
S/N GAY1-UP
PART OF 374-8289 BUCKET AR-GENERAL PURPOSE
i06038863 SEBP7454
2297163 TIP GP-PENETRATION PLUS Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 233-7150 [1] RETAINER-G.E.T. (K-150)  
2. 467-9817 [1] TIP-PENETRATION PLUS (K-150)  
 

#SEBP74540907
 

368-3869: TIP GP-PENETRATION PLUS

368-3869 TIP GP-PENETRATION PLUS -X-170
S/N GAY1-UP
i07074437 SEBP7454
3683869 TIP GP-PENETRATION PLUS Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 454-9600 [2] SLEEVE  
2. 456-1689 [2] RETAINER-LOCK  
 

#SEBP74540908
 

340-6709: AIR CONDITIONER & MOUNTING GP

340-6709 AIR CONDITIONER & MOUNTING GP
S/N GAY1-UP
PART OF 372-9526 AIR CONDITIONER AR
Type 1
i05409573 SEBP7454
3406709 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 235-8874 [1] SENSOR-TEMPERATURE (AMBIENT AIR)  
3. 340-6510 [1] BLOCK GP-JUNCTION  
  113-3468 [1] SEAL-O-RING  
  121-7063 [1] SEAL-O-RING  
  293-1139 [1] SWITCH AS-PRESSURE (REFRIGERANT)  
4. 340-6700 [1] BRACKET  
5. 363-9494 [1] PANEL AS-CONTROL (AIR CONDITIONER, HEATER)  
6. 363-9495 [1] HARNESS AS-HEATER & AIR COND  
7. 363-9496 Y [1] AIR CONDITIONER GP  
8. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
9. 5C-9553 M [2] BOLT (M6X1X16-MM)  
10. 8T-4222 [6] WASHER-PLATED (11X32X2.5-MM THK)  
11. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
13. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
14. 8T-4971 M [1] BOLT (M6X1X30-MM)  
15. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74540909
 

340-6709: AIR CONDITIONER & MOUNTING GP

340-6709 AIR CONDITIONER & MOUNTING GP
S/N GAY1-UP
PART OF 372-9526 AIR CONDITIONER AR
Type 2
i06621408 SEBP7454
3406709 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 235-8874 [1] SENSOR-TEMPERATURE (AMBIENT AIR)  
3. 340-6510 [1] BLOCK GP-JUNCTION  
  113-3468 [1] SEAL-O-RING  
  121-7063 [1] SEAL-O-RING  
  293-1139 [1] SWITCH AS-PRESSURE (REFRIGERANT)  
4. 340-6700 [1] BRACKET  
5. 363-9494 [1] PANEL AS-CONTROL (AIR CONDITIONER, HEATER)  
6. 363-9495 [1] HARNESS AS-HEATER & AIR COND  
7. 498-1163 CY [1] AIR CONDITIONER GP  
8. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
9. 5C-9553 M [2] BOLT (M6X1X16-MM)  
10. 8T-4222 [6] WASHER-PLATED (11X32X2.5-MM THK)  
11. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
13. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
14. 8T-4971 M [1] BOLT (M6X1X30-MM)  
15. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Bucket Tips - Inspect/Replace
390F Excavator
Special Instruction
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Service Magazine
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

Caterpillar Parts SIS Catalog 390F L :

BUCKET GP-SEVERE SERVICE SPADE
341-8648 BUCKET GP-SEVERE SERVICE SPADE
BUCKET AS-SEVERE SERVICE SPADE
519-5490 BUCKET AS-SEVERE SERVICE SPADE
BUCKET AS-SEVERE SERVICE ROCK
519-5483 BUCKET AS-SEVERE SERVICE ROCK
BUCKET AS-SEVERE SERVICE ROCK
519-5481 BUCKET AS-SEVERE SERVICE ROCK
BUCKET AS-SEVERE SERVICE ROCK
485-8467 BUCKET AS-SEVERE SERVICE ROCK
BUCKET AS-SEVERE SERVICE ROCK
361-4851 BUCKET AS-SEVERE SERVICE ROCK
BUCKET AS-SEVERE SERVICE ROCK
361-4850 BUCKET AS-SEVERE SERVICE ROCK
BUCKET AS-SEVERE SERVICE ROCK
360-6045 BUCKET AS-SEVERE SERVICE ROCK
GUARD GP-CYLINDER
503-7121 GUARD GP-CYLINDER
PROTECTOR GP-BUCKET
357-2686 PROTECTOR GP-BUCKET
PROTECTOR GP-SIDE BAR
357-2688 PROTECTOR GP-SIDE BAR
TIP GP-PENETRATION
350-6750 TIP GP-PENETRATION
TIP GP-PENETRATION PLUS
195-9186 TIP GP-PENETRATION PLUS
TIP GP-PENETRATION PLUS
229-7163 TIP GP-PENETRATION PLUS
TIP GP-PENETRATION PLUS
368-3869 TIP GP-PENETRATION PLUS
AIR CONDITIONER & MOUNTING GP
340-6709 AIR CONDITIONER & MOUNTING GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.