AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

398-7006 WIRING GP-CONSOLE -RH S/N GJD1-UP PART OF 398-7005 WIRING GP-CONSOLE 313F LGC EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 313F LGC EXCAVATOR GJD
 313F LGC Excavator GJD00001-UP (MACHINE) POWERED BY C3.4B Engine SEBP7469 313F LGC GJD   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
398-7005 WIRING GP-CONSOLE
WIRING GP-CONSOLE
398-7006 WIRING GP-CONSOLE
WIRING GP-CONVERTER
449-4136 WIRING GP-CONVERTER
WIRING GP-ENGINE
506-9061 WIRING GP-ENGINE
WIRING GP-FUEL PUMP
449-4177 WIRING GP-FUEL PUMP
 

#SEBP74690290
 

398-7006: WIRING GP-CONSOLE

398-7006 WIRING GP-CONSOLE -RH
S/N GJD1-UP
PART OF 398-7005 WIRING GP-CONSOLE
i05474711 SEBP7469
3987006 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 7K-1181 [2] STRAP-CABLE  
3. 163-6795 [1] STRAP-CABLE  
4. 398-7012 Y [1] HARNESS AS-CONSOLE (RH)  
5. 3E-9375 E CONDUIT (10-CM)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690291
 

449-4136: WIRING GP-CONVERTER

449-4136 WIRING GP-CONVERTER -POWER SUPPLY
S/N GJD1-UP
12-VOLT, 10 AMPRE
PART OF 449-4131, 493-8514 CONTROL & MONITOR GP-CAB
i05877929 SEBP7469
4494136 WIRING GP-CONVERTER Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 324-5771 [1] SOCKET-AUXILIARY POWER (12-VOLT)  
3. 369-0153 [1] WIRE AS (14-GA)  
 

#SEBP74690292
 

506-9061: WIRING GP-ENGINE

506-9061 WIRING GP-ENGINE
S/N CNW1-UP
PART OF 392-1640 HARNESS GP-ENGINE
i07013292 SEBP7469
5069061 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0846 M [2] BOLT (M6X1X14-MM)  
2. 124-3815 M [2] BOLT (M8X1.25X16-MM)  
3. 316-9351 [2] MOUNTING-CABLE TIE  
4. 346-8219 [1] FILM-WARNING (UNIVERSAL WARNING)  
5. 389-1874 [3] BOLT-SPECIAL  
6. 419-8712 [1] BRACKET  
7. 419-8715 [1] BRACKET  
8. 456-4688 [1] BRACKET AS  
9. 456-5278 [4] SCREW  
10. 506-8979 [1] BRACKET AS  
  419-8713 [1] BRACKET  
11. 511-7010 [1] HARNESS AS-ENGINE  
12. 517-0154 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP74690293
 

449-4177: WIRING GP-FUEL PUMP

449-4177 WIRING GP-FUEL PUMP -REFUELING PUMP
S/N GJD1-UP
PART OF 448-9659 PUMP AR-FUEL TRANSFER
i05845368 SEBP7469
4494177 WIRING GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 225-3364 [1] RELAY (12-VOLT)  
3. 450-9688 [1] HARNESS AS-WIRING  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
4. 095-0741 M [1] SCREW-MACHINE (M6X1-THD)  
5. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP74690294
 

449-4177: WIRING GP-FUEL PUMP

449-4177 WIRING GP-FUEL PUMP -REFUELING PUMP
PART OF 448-9659 PUMP AR-FUEL TRANSFER
i06542604 SEBP7469
4494177 WIRING GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 225-3364 [1] RELAY (12-VOLT)(REFUELING PUMP)  
3. 450-9688 [1] HARNESS AS-WIRING (REFUELING PUMP)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
4. 9X-2043 M [1] SCREW-TRUSS HEAD (M6X1X14-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP74690295
 

449-4142: WIRING GP-PLATFORM

449-4142 WIRING GP-PLATFORM
S/N GJD1-429
PART OF 449-4131 CONTROL & MONITOR GP-CAB
i05878549 SEBP7469
4494142 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [8] STRAP-CABLE  
3. 7G-1060 [1] STRAP AS-GROUND  
4. 7K-1181 [10] STRAP-CABLE  
5. 111-4836 [5] CLIP  
6. 111-4837 [1] CLIP  
7. 111-4839 [2] STRAP  
8. 116-0118 [12] CLIP  
9. 234-1122 [1] COVER  
10. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
11. 469-0483 [1] HARNESS AS-PLATFORM  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [30] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [19] STRAP-CABLE  
  8N-1543 [1] SOCKET-CONNECTOR (10-GA)  
  8T-8737 [22] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [19] TERMINAL (FEMALE)  
  9W-0852 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(12-CM)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [22] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)  
  9X-3402 [42] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [42] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  127-5485 [1] PLUG AS-CONNECTOR (1-PIN)  
  9G-4343 [2] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8069 [3] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [13] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
  230-4011 [10] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  455-0707 [1] SEAL-CONNECTOR  
  237-0227 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  455-0705 [1] SEAL-CONNECTOR  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [7] TERMINAL (MALE)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [3] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  342-2972 [5] CAP-CONNECTOR (2-PIN)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 111-4838 [2] CLIP  
14. 199-7854 [1] SPACER (11.8X20X45-MM THK)  
15. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
16. 7X-2621 M [6] BOLT (M10X1.5X12-MM)  
17. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
18. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
20. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP74690296
 

449-4142: WIRING GP-PLATFORM

449-4142 WIRING GP-PLATFORM
S/N GJD430-571
PART OF 449-4131 CONTROL & MONITOR GP-CAB
i06807075 SEBP7469
4494142 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [8] STRAP-CABLE  
3. 7G-1060 [1] STRAP AS-GROUND  
4. 7K-1181 [10] STRAP-CABLE  
5. 111-4836 [5] CLIP  
6. 111-4837 [1] CLIP  
7. 111-4839 [2] STRAP  
8. 116-0118 [12] CLIP  
9. 234-1122 [1] COVER  
10. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
11. 486-7827 CY [1] HARNESS AS-PLATFORM  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 111-4838 [2] CLIP  
14. 199-7854 [1] SPACER (11.8X20X45-MM THK)  
15. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
16. 7X-2621 M [6] BOLT (M10X1.5X12-MM)  
17. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
18. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
20. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690297
 

449-4142: WIRING GP-PLATFORM

449-4142 WIRING GP-PLATFORM
S/N GJD572-UP
PART OF 493-8514 CONTROL & MONITOR GP-CAB
i06859471 SEBP7469
4494142 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [8] STRAP-CABLE  
3. 7G-1060 [1] STRAP AS-GROUND  
4. 7K-1181 [10] STRAP-CABLE  
5. 111-4836 [5] CLIP  
6. 111-4837 [1] CLIP  
7. 111-4839 [2] STRAP  
8. 116-0118 [12] CLIP  
9. 234-1122 [1] COVER  
10. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
11. 500-1046 CY [1] HARNESS AS-PLATFORM  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 111-4838 [2] CLIP  
14. 199-7854 [1] SPACER (11.8X20X45-MM THK)  
15. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
16. 7X-2621 M [6] BOLT (M10X1.5X12-MM)  
17. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
18. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
20. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690298
 

450-4253: DRIVE & MOUNTING GP-FINAL

450-4253 DRIVE & MOUNTING GP-FINAL
S/N GJD1-10268
PART OF 450-4251 POWER TRAIN AR
i05880120 SEBP7469
4504253 DRIVE & MOUNTING GP-FINAL Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-3707 M [32] BOLT (M16X2X50-MM)  
2. 450-4254 Y [2] DRIVE GP-FINAL  
3. 9X-8268 [32] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690299
 

450-4253: DRIVE & MOUNTING GP-FINAL

450-4253 DRIVE & MOUNTING GP-FINAL
S/N GJD10269-UP
PART OF 450-4251 POWER TRAIN AR
i07350871 SEBP7469
4504253 DRIVE & MOUNTING GP-FINAL Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-3707 M [32] BOLT (M16X2X50-MM)  
2. 512-4729 CY [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
3. 9X-8268 [32] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Disassembly and Assembly
Inlet Manifold Pressure Sensor - Remove and Install
C3.4B Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 313F LGC :

398-7005 WIRING GP-CONSOLE
WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
461-3433 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
440-5598 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
421-8403 WIRING GP-COMMUNICATION
WIRING GP-CHASSIS
493-6940 WIRING GP-CHASSIS
WIRING GP-CHASSIS
449-4203 WIRING GP-CHASSIS
WIRING GP-CHASSIS
449-4186 WIRING GP-CHASSIS
WIRING GP-CONVERTER
449-4136 WIRING GP-CONVERTER
WIRING GP-ENGINE
506-9061 WIRING GP-ENGINE
WIRING GP-FUEL PUMP
449-4177 WIRING GP-FUEL PUMP
WIRING GP-FUEL PUMP
449-4177 WIRING GP-FUEL PUMP
WIRING GP-PLATFORM
449-4142 WIRING GP-PLATFORM
WIRING GP-PLATFORM
449-4142 WIRING GP-PLATFORM
WIRING GP-PLATFORM
449-4142 WIRING GP-PLATFORM
DRIVE & MOUNTING GP-FINAL
450-4253 DRIVE & MOUNTING GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.