AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

484-2103 CYLINDER GP-BUCKET -RH S/N GJD1-UP 70-MM (28-IN) BORE X 167.3-MM (6.6-IN) STROKE PART OF 484-0198, 484-0199 BUCKET GP-DITCH CLEANING 313F LGC


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP
FITTING GP

EXCAVATOR 313F LGC EXCAVATOR GJD
 313F LGC Excavator GJD00001-UP (MACHINE) POWERED BY C3.4B Engine SEBP7469 313F LGC GJD   (2015)

HYDRAULIC SYSTEM

CYLINDER GP
478-2174 CYLINDER AR-BOOM
CYLINDER GP-BUCKET
484-2102 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
484-2103 CYLINDER GP-BUCKET
HEAD GP-HYDRAULIC CYLINDER
494-4313 HEAD GP-HYDRAULIC CYLINDER
GUARD GP-CYLINDER
326-4440 GUARD GP-CYLINDER
 

#SEBP74690420
 

484-2103: CYLINDER GP-BUCKET

484-2103 CYLINDER GP-BUCKET -RH
S/N GJD1-UP
70-MM (28-IN) BORE X 167.3-MM (6.6-IN) STROKE
PART OF 484-0198, 484-0199 BUCKET GP-DITCH CLEANING
i06296644 SEBP7469
4842103 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 494-4313 JY [1] HEAD GP-HYDRAULIC CYLINDER  
3. 324-0498 [1] PISTON AS  
3A. 161-7145 J [1] SEAL-PISTON  
3B. 340-6272 J [2] RING-WEAR  
3C. 340-9311 J [1] SEAL-O-RING  
  324-0497 [1] PISTON  
4. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
5. 484-2094 [1] ROD AS  
5A. [1] BUSHING  
6. 484-2104 [1] CYLINDER AS-TILT  
6A. [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  501-6692 J [1] KIT-HYD CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690421
 

450-6323: DRIVE & MTG GP-SWING

450-6323 DRIVE & MTG GP-SWING
S/N GJD1-UP
PART OF 450-4251 POWER TRAIN AR
i05880146 SEBP7469
4506323 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1374 [1] SUPPORT  
2. 352-7064 [2] CAP  
3. 461-3872 M [14] BOLT (M16X2X50-MM)  
4. 450-6324 Y [1] DRIVE GP-SWING  
5. 481-3909 [14] WASHER-HARD (17.5X30X5-MM THK)  
6. 191-2543 [2] PIN  
7. 5D-1026 [1] CLAMP-BAND  
8. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
10. 5P-0767 E HOSE (62-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690422
 

333-3073: DRIVE GP-SWING

333-3073 DRIVE GP-SWING -WITHOUT MOTOR
S/N GJD1-178
PART OF 421-9132 DRIVE GP-SWING
i04506329 SEBP7469
3333073 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-6089 [2] DOWEL  
2. 191-2602 [6] WASHER (32X56X1.2-MM THK)  
3. 191-2605 [1] WASHER (30X75X3-MM THK)  
4. 191-2608 [3] GEAR-PLANETARY  
5. 191-2609 [3] SHAFT-PLANETARY  
6. 191-2610 [3] PIN-SPRING  
7. 191-2611 [1] GEAR-SUN  
8. 191-2613 [1] GEAR-RING  
9. 199-4627 [6] WASHER  
10. 333-3048 [1] CARRIER  
11. 333-3049 [3] GEAR-PLANETARY  
12. 333-3050 [3] BEARING  
13. 333-3051 [3] SHAFT  
14. 095-0879 [3] PIN-SPRING  
15. 333-3058 [3] WASHER-THRUST (30X47X2-MM THK)  
16. 333-3059 [3] RING-RETAINING  
17. 7X-2619 M [6] BOLT (M6X1X10-MM)  
18. 353-0534 [1] BEARING  
19. 353-0535 [1] BEARING  
20. 353-0536 [1] CARRIER-PLANETARY  
21. 353-0537 [6] BEARING  
22. 353-0538 [1] GEAR-SUN  
23. 353-0539 [1] SHAFT-PINION  
24. 353-0540 [1] HOUSING  
25. 353-0541 [1] SEAL-LIP TYPE  
26. 353-0542 [1] SEAL  
27. 353-0543 [2] PLATE  
28. 095-0929 [1] RING-RETAINING  
  M   METRIC PART
 

#SEBP74690423
 

421-9132: DRIVE GP-SWING

421-9132 DRIVE GP-SWING -WITH MOTOR
S/N GJD1-178
PART OF 450-6324 DRIVE GP-SWING
i05367499 SEBP7469
4219132 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 333-3073 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 422-9182 Y [1] MOTOR GP-SWING  
3. 6V-7644 [1] RING-RETAINING  
4. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-5041 M [12] BOLT (M12X1.75X120-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690424
 

421-9132: DRIVE GP-SWING

421-9132 DRIVE GP-SWING -WITH MOTOR
S/N GJD179-UP
PART OF 450-6324 DRIVE GP-SWING
i06705176 SEBP7469
4219132 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 467-4412 CY [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 422-9182 Y [1] MOTOR GP-SWING  
3. 6V-7644 [1] RING-RETAINING  
4. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-5041 M [12] BOLT (M12X1.75X120-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690425
 

450-6324: DRIVE GP-SWING

450-6324 DRIVE GP-SWING
S/N GJD1-UP
PART OF 450-6323 DRIVE & MTG GP-SWING
i05880150 SEBP7469
4506324 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7238 [1] VALVE-SHUTOFF  
2. 099-3563 [1] CONNECTOR  
3. 191-2662 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
4. 267-6744 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER  
  227-6227 [1] BOSS  
  267-6786 [1] FITTING  
5. 421-9132 Y [1] DRIVE GP-SWING (WITH MOTOR)  
6. 424-0524 [1] PIPE-GAUGE  
7. 3K-0360 [2] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74690426
 

467-4412: DRIVE GP-SWING

467-4412 DRIVE GP-SWING
S/N GJD179-UP
WITHOUT MOTOR
PART OF 421-9132 DRIVE GP-SWING
i06145422 SEBP7469
4674412 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-6089 [2] DOWEL  
2. 191-2602 [6] WASHER (32X56X1.2-MM THK)  
3. 191-2605 [1] WASHER (30X75X3-MM THK)  
4. 191-2608 [3] GEAR-PLANETARY  
5. 191-2609 [3] SHAFT-PLANETARY  
6. 191-2610 [3] PIN-SPRING  
7. 191-2611 [1] GEAR-SUN  
8. 191-2613 [1] GEAR-RING  
9. 199-4627 [6] WASHER  
10. 333-3048 [1] CARRIER  
11. 333-3049 [3] GEAR-PLANETARY  
12. 333-3050 [3] BEARING  
13. 333-3051 [3] SHAFT  
14. 095-0879 [3] PIN-SPRING  
15. 333-3058 [3] WASHER-THRUST (30X47X2-MM THK)  
16. 333-3059 [3] RING-RETAINING  
17. 7X-2619 M [6] BOLT (M6X1X10-MM)  
18. 353-0534 [1] BEARING  
19. 466-5323 [1] BEARING  
20. 353-0536 [1] CARRIER-PLANETARY  
21. 353-0537 [6] BEARING  
22. 353-0538 [1] GEAR-SUN  
23. 353-0539 [1] SHAFT-PINION  
24. 353-0540 [1] HOUSING  
25. 353-0541 [1] SEAL-LIP TYPE  
26. 353-0542 [1] SEAL  
27. 353-0543 [2] PLATE  
28. 095-0929 [1] RING-RETAINING  
  M   METRIC PART
 

#SEBP74690427
 

289-8194: FILTER GP-OIL

289-8194 FILTER GP-OIL -HYDRAULIC, CASE DRAIN
S/N GJD1-UP
PART OF 447-5841 TANK & FILTER GP-HYDRAULIC
i02612632 SEBP7469
2898194 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-7521 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, CASE DRAIN)  
2. 289-8195 [1] HEAD AS-FILTER  
 

#SEBP74690428
 

392-2876: FILTER GP-OIL

392-2876 FILTER GP-OIL -HYDRAULIC, MAIN RETURN
S/N GJD1-UP
PART OF 447-5841 TANK & FILTER GP-HYDRAULIC
i04971229 SEBP7469
3922876 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 283-6090 [1] SEAL-O-RING  
2. 398-7170 [1] HOUSING AS  
3. 398-7171 [1] ELEMENT (HYDRAULIC RETURN FILTER)  
4. 398-7172 [1] VALVE AS  
5. 398-7173 [1] SPRING  
6. 398-7174 [1] COVER  
7. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP74690429
 

214-4513: FITTING GP-HYDRAULIC

214-4513 FITTING GP-HYDRAULIC
S/N GJD1-UP
PART OF 447-5840 LINES GP-HYDRAULIC
i01867488 SEBP7469
2144513 FITTING GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 313F LGC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-4506 [1] TEE AS  
2. 3D-2824 [1] SEAL-O-RING  
3. 6V-8398 [1] SEAL-O-RING  
4. 6V-9746 [1] SEAL-O-RING  
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Caterpillar Parts SIS Catalog 313F LGC :

CYLINDER GP-BUCKET
484-2102 CYLINDER GP-BUCKET
478-2174 CYLINDER AR-BOOM
472-6239 CYLINDER AR-BOOM
393-6344 CYLINDER AR-BOOM
385-2824 CYLINDER AR-BOOM
CYLINDER & SEAL GP-STICK
385-2831 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-BUCKET
385-2834 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
385-2828 CYLINDER & SEAL GP-BOOM
DRIVE & MTG GP-SWING
450-6323 DRIVE & MTG GP-SWING
DRIVE GP-SWING
333-3073 DRIVE GP-SWING
DRIVE GP-SWING
421-9132 DRIVE GP-SWING
DRIVE GP-SWING
421-9132 DRIVE GP-SWING
DRIVE GP-SWING
450-6324 DRIVE GP-SWING
DRIVE GP-SWING
467-4412 DRIVE GP-SWING
FILTER GP-OIL
289-8194 FILTER GP-OIL
FILTER GP-OIL
392-2876 FILTER GP-OIL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.