AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

248-2366 PUMP GP-FUEL INJECTION S/N CST1-UP 2000 RPM ENGINE RATINGS PART OF 421-7100 PUMP GP-FUEL INJECTION ALSO AN ATTACHMENT 312D2


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
TANK GP-FUEL

EXCAVATOR 312D2 EXCAVATOR DGF
 312D2 & 312D2 L Excavators DGF00001-UP (MACHINE) POWERED BY 3054C Engine SEBP7473 312D2 DGF   (2014)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
248-2366 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
421-7100 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
421-7100 PUMP GP-FUEL INJECTION
 

#SEBP74730080
 

248-2366: PUMP GP-FUEL INJECTION

248-2366 PUMP GP-FUEL INJECTION
S/N CST1-UP
2000 RPM ENGINE RATINGS
PART OF 421-7100 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i04954702 SEBP7473
2482366 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-3968 [1] SEAL-O-RING  
2. 147-2645 [1] SOLENOID-SHUTOFF (24-VOLT)(FUEL SHUTOFF)  
3. 111-3422 M [1] NUT (M14X1.5-THD)  
4. 111-3423 [1] WASHER  
  M   METRIC PART
 

#SEBP74730081
 

421-7100: PUMP GP-FUEL INJECTION

421-7100 PUMP GP-FUEL INJECTION
S/N CST1-UP
PART OF 456-1374, 470-9231 ENGINE AR-PRIMARY
Type 1
ALSO AN ATTACHMENT
i04952832 SEBP7473
4217100 PUMP GP-FUEL INJECTION Parts scheme 4217100 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 067-6265 [1] FITTING-BRASS  
6. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
7. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
8. 140-8714 [1] CLIP  
9. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
10. 230-8995 [1] TUBE AS (CYL NO. 1)  
11. 230-8996 [1] TUBE AS (CYL NO. 2)  
12. 230-8997 [1] TUBE AS (CYL NO. 3)  
13. 230-8998 [1] TUBE AS (CYL NO. 4)  
14. 232-1328 [1] CAP  
15. 232-1793 [1] CABLE  
16. 232-1794 [3] HOSE  
17. 232-2725 [2] CLIP  
18. 232-2726 [1] CLIP  
19. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
20. 232-3157 [1] BRACKET  
21. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
22. 235-1790 [1] SWITCH-TEMPERATURE (FUEL)  
23. 236-1674 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
23A. 140-8718 [1] WASHER  
23B. 236-1673 [1] NOZZLE  
23C. 275-1038 [1] SEAL-O-RING  
24. 236-2144 [1] TUBE AS  
24A. 067-6999 [1] FERRULE  
25. 238-8671 [4] CLAMP-INJECTOR  
26. 240-5571 [1] BRACKET  
27. 248-2366 Y [1] PUMP GP-FUEL INJECTION  
28. 318-2365 [1] CLIP  
29. 365-3308 [1] NUT-COMPRESSION  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74730082
 

421-7100: PUMP GP-FUEL INJECTION

421-7100 PUMP GP-FUEL INJECTION
S/N CST1-UP
PART OF 456-1374, 470-9231 ENGINE AR-PRIMARY
Type 2
ALSO AN ATTACHMENT
i07265511 SEBP7473
4217100 PUMP GP-FUEL INJECTION Parts scheme 4217100 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 067-6265 [1] FITTING-BRASS  
6. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
7. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
8. 140-8714 [1] CLIP  
9. 425-7107 [1] GEAR-FUEL PUMP (68-TEETH)  
10. 230-8995 [1] TUBE AS (CYL NO. 1)  
11. 230-8996 [1] TUBE AS (CYL NO. 2)  
12. 230-8997 [1] TUBE AS (CYL NO. 3)  
13. 230-8998 [1] TUBE AS (CYL NO. 4)  
14. 232-1328 [1] CAP  
15. 232-1793 [1] CABLE  
16. 232-1794 [3] HOSE  
17. 232-2725 [2] CLIP  
18. 232-2726 [1] CLIP  
19. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
20. 232-3157 [1] BRACKET  
21. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
22. 235-1790 [1] SWITCH-TEMPERATURE (FUEL)  
23. 236-1674 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
23A. 140-8718 [1] WASHER  
23B. 236-1673 [1] NOZZLE  
23C. 275-1038 [1] SEAL-O-RING  
24. 236-2144 [1] TUBE AS  
24A. 067-6999 [1] FERRULE  
25. 238-8671 [4] CLAMP-INJECTOR  
26. 240-5571 [1] BRACKET  
27. 483-2329 C [1] PUMP AS-FUEL  
27A. 111-3422 M [1] NUT (M14X1.5-THD)  
27B. 147-2645 [1] SOLENOID-SHUTOFF (24-VOLT)  
27C. 152-3968 [1] SEAL-O-RING  
28. 318-2365 [1] CLIP  
29. 365-3308 [1] NUT-COMPRESSION  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP74730083
 

260-7094: PUMP GP-FUEL TRANSFER

260-7094 PUMP GP-FUEL TRANSFER
S/N EAB1-UP
PART OF 452-2921 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT
i05862197 SEBP7473
2607094 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3440 [4] CLAMP-HOSE  
2. 312-2645 [1] SWITCH AS-LIQUID LEVEL (FUEL TANK SHUTOFF)  
  2S-4078 [1] SEAL-O-RING  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
3. 7K-1181 [1] STRAP-CABLE  
4. 105-6701 [1] CONNECTOR-HOSE  
5. 324-5761 [1] COVER AS  
6. 135-8572 [2] BOLT AS  
7. 501-4185 CJ [1] VALVE AS (FOOT)  
  451-6724 [1] STRAINER (REFUELING)  
  451-6726 [1] SPRING (STRAINER)  
  451-6728 [1] SPRING  
8. 482-9198 C [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  272-4215 [1] GROMMET  
  121-1029 [1] CLIP  
9. 283-8931 [1] PLATE  
10. 271-2158 Y [1] PUMP GP-FUEL TRANSFER  
11. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
12. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
14. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
15. 457-1156 E HOSE (75-CM)  
15A. 457-1156 E HOSE (302-CM)  
16. 309-9690 [1] FILM-INFORMATION (READ OMM)  
17. 115-8647 [1] GUARD  
18. 202-1741 [1] GUARD  
19. 282-5900 [1] GUARD  
   
    AVAILABLE REPAIR KIT(S):
  501-4188 J [1] KIT-VALVE (FOOT)  
    (INCLUDES CAP & SEAL)
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74730084
 

260-7094: PUMP GP-FUEL TRANSFER

260-7094 PUMP GP-FUEL TRANSFER
S/N EAB1-UP
PART OF 452-2921 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT
i07030837 SEBP7473
2607094 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3440 [4] CLAMP-HOSE  
2. 418-6596 C [1] SWITCH AS-LIQUID LEVEL (FUEL TANK SHUTOFF)  
  2S-4078 [1] SEAL-O-RING  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
3. 7K-1181 [1] STRAP-CABLE  
4. 105-6701 [1] CONNECTOR-HOSE  
5. 324-5761 [1] COVER AS  
6. 135-8572 [2] BOLT AS  
7. 501-4185 J [1] VALVE AS (FOOT)  
  451-6724 [1] STRAINER (REFUELING)  
  451-6726 [1] SPRING (STRAINER)  
  451-6728 [1] SPRING  
8. 482-9198 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  272-4215 [1] GROMMET  
  121-1029 [1] CLIP  
  5P-5930 D SEAL (0.1-M)  
9. 283-8931 [1] PLATE  
10. 368-7702 CY [1] PUMP GP-FUEL TRANSFER  
11. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
12. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
14. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
15. 457-1156 E HOSE (75-CM)  
15A. 457-1156 E HOSE (302-CM)  
16. 309-9690 [1] FILM-INFORMATION (READ OMM)  
17. 115-8647 [1] GUARD  
18. 202-1741 [1] GUARD  
19. 282-5900 [1] GUARD  
   
    AVAILABLE REPAIR KIT(S):
  501-4188 J [1] KIT-VALVE (FOOT)  
    (INCLUDES CAP & SEAL)
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74730085
 

271-2158: PUMP GP-FUEL TRANSFER

271-2158 PUMP GP-FUEL TRANSFER
S/N EAB1-UP
PART OF 260-7094 PUMP GP-FUEL TRANSFER
AN ATTACHMENT
i05862232 SEBP7473
2712158 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
2. 243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
3. 272-0709 [1] PUMP-FUEL  
4. 272-0710 [1] CONTROL-REFUELING PUMP  
5. 7Y-3963 [2] TERMINAL-BULLET (FEMALE)  
6. 7Y-3962 [2] TERMINAL-BULLET (MALE)  
7. 7Y-3964 [2] TUBE (CONNECTOR TERMINAL)  
8. 7Y-3965 [2] TUBE (RECEPTACLE TERMINAL)  
9. 125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(7-CM)  
   
    AVAILABLE REPAIR KIT(S):
  450-1784 [1] KIT-PUMP (FUEL TRANSFER)  
    (INCLUDES HOSE TAIL & WASHER)
  450-1785 [1] KIT-PUMP (FUEL TRANSFER)  
    (INCLUDES VANE)
  450-1786 [1] KIT-PUMP (FUEL TRANSFER)  
    (INCLUDES ROTOR, PLATE, & SEAL)
  E   ORDER BY THE CENTIMETER
 

#SEBP74730086
 

368-7702: PUMP GP-FUEL TRANSFER

368-7702 PUMP GP-FUEL TRANSFER
S/N EAB1-UP
PART OF 260-7094 PUMP GP-FUEL TRANSFER
AN ATTACHMENT
i07030875 SEBP7473
3687702 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
    AVAILABLE REPAIR KIT(S):
  450-1778 [1] KIT-PUMP (CONNECTOR)  
    (INCLUDES CONNECTOR & WASHER)
  450-1779 [1] KIT-PUMP (VANE)  
    (INCLUDES VANES)
  450-1780 [1] KIT-PUMP (ROTOR)  
    (INCLUDES ROTOR, PLATE & SEAL)
 

#SEBP74730087
 

391-4808: TANK & MTG GP-FUEL

391-4808 TANK & MTG GP-FUEL
S/N EAB1-UP; DGF1-UP
PART OF 454-5570, 454-5571 CHASSIS AR
ALSO AN ATTACHMENT
i04941703 SEBP7473
3914808 TANK & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP (FUEL TANK FILL CAP)  
  5P-8500 [1] KEY  
2. 085-9310 [4] SPACER (16.6X32X26-MM THK)  
3. 447-1707 M [4] BOLT (M16X2X60-MM)  
4. 391-4809 Y [1] TANK GP-FUEL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74730088
 

391-4810: TANK & MTG GP-FUEL

391-4810 TANK & MTG GP-FUEL
S/N EAB1-UP
PART OF 452-2921 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
i05862202 SEBP7473
3914810 TANK & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 KEY  
2. 392-2671 Y [1] TANK GP-FUEL  
3. 085-9310 [4] SPACER (16.6X32X26-MM THK)  
4. 135-8579 [2] BOLT AS  
5. 8T-4140 M [4] BOLT (M16X2X60-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74730089
 

391-4809: TANK GP-FUEL

391-4809 TANK GP-FUEL
S/N EAB1-UP; DGF1-UP
235-L (62.1-US GAL)
PART OF 391-4808 TANK & MTG GP-FUEL
ALSO AN ATTACHMENT
i05032280 SEBP7473
3914809 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 312D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0378 [1] GASKET-RUBBER  
2. 217-8185 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  9X-3982 [1] ELBOW  
3. 303-9933 J [1] STRAINER AS-FUEL (FLOAT GAUGE)  
4. 341-1842 [1] SENDER AS-FUEL LEVEL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 349-7059 H [1] CAP AS-FUEL (LOCKABLE, VENTED)  
  7D-7111 [1] SEAL-O-RING  
6. 8T-0328 [5] WASHER-HARD (5.5X10X1-MM THK)  
7. 095-0736 M [5] SCREW-MACHINE (M5X0.8X10-MM)  
8. 150-3024 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  5P-4924 [1] ELBOW  
9. 170-0967 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  5P-4906 [1] ELBOW  
   
    AVAILABLE REPAIR KIT(S):
  303-9937 J [1] KIT-GAUGE (FUEL STRAINER)  
    (INCLUDES STOPPER & GAUGE)
  350-7735 H [1] KIT-CAP FILTER (FUEL TANK)  
    (INCLUDES BODY,GASKET,SCREWS & WASHERS)
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Specifications
Fuel Injection Nozzles
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump
3054C Engines for Caterpillar Built Machines
Testing and Adjusting
Fuel Injection Nozzle - Test
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump Timing - Adjust
3054C Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3054C Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove - Delphi DP210
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump - Install - Delphi DP210
3054C Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Torque for Locknut on Fuel Injection Pump {1251, 1290}
2008/06/23

Caterpillar Parts SIS Catalog 312D2 :

452-2921 PUMP AR-FUEL TRANSFER
LINES GP-FUEL
460-0656 LINES GP-FUEL
LINES GP-FUEL
387-2602 LINES GP-FUEL
FILTER GP-FUEL
446-1895 FILTER GP-FUEL
CONTROL GP-GOVERNOR
388-6703 CONTROL GP-GOVERNOR
TURBOCHARGER GP
421-7110 TURBOCHARGER GP
509-4396 PRECLEANER AR
381-1382 PRECLEANER AR
PUMP GP-FUEL INJECTION
421-7100 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
421-7100 PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
260-7094 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
260-7094 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
271-2158 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
368-7702 PUMP GP-FUEL TRANSFER
TANK & MTG GP-FUEL
391-4808 TANK & MTG GP-FUEL
TANK & MTG GP-FUEL
391-4810 TANK & MTG GP-FUEL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.