BASIC ENGINE
PAN GP-OILPISTON & ROD GP
CYLINDER HEAD GP
PULLEY GP
BASIC ENGINE
PAN GP-OIL
#SEBP74750050
397-1501: PAN GP-OIL
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0217 M | [29] | BOLT (M8X1.25X20-MM) | |
| 2. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 3. | 6I-0363 M | [2] | BOLT (M6X1X20-MM) | |
| 4. | 6I-0572 M | [2] | BOLT (M8X1.25X20-MM) | |
| 5. | 124-3815 M | [1] | BOLT (M8X1.25X16-MM) | |
| 6. | 230-8094 | [1] | BRIDGE | |
| 7. | 275-9897 | [1] | BRACKET | |
| 8. | 280-1384 | [1] | TUBE AS-OIL SUCTION | |
| 9. | 351-4749 | [1] | GASKET-OIL PAN | |
| 10. | 6I-0289 | [1] | PLUG | |
| 11. | 378-8587 | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | |
| 12. | 453-6156 Y | [1] | PAN GP-OIL | |
| 13. | 396-2395 | [1] | BRACKET AS | |
| 14. | 6I-0654 M | [1] | BOLT (M10X1.5X25-MM) | |
| 15. | 6I-4200 M | [2] | BOLT (M10X1.5X16-MM) | |
| 16. | 6I-4681 | [1] | GASKET | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74750051
453-6156: PAN GP-OIL
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 213-0677 | [1] | SWITCH AS-LIQUID LEVEL (ENGINE OIL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 2. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
| 3. | 189-9377 | [1] | SEAL-O-RING | |
| 4. | 316-9351 | [1] | MOUNTING-CABLE TIE | |
| 5. | 8L-2786 | [2] | SEAL-O-RING | |
#SEBP74750052
348-3296: PISTON & ROD GP
348-3296 PISTON & ROD GP
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 1
ALSO AN ATTACHMENT
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 1
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 331-0290 | [6] | CONNECTING ROD GP | |
| (EACH INCLUDES) | ||||
| 1A. | 276-7478 | [1] | BUSHING | |
| 1B. | 323-9312 M | [2] | BOLT (M10X1X50-MM) | |
| 2. | 370-7998 N | [6] | PISTON GP | |
| 3. | 317-5482 L | [6] | BEARING | |
| 4. | 317-5483 L | [6] | BEARING | |
| 5. | 124-3536 N | [12] | RING-RETAINING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 360-1564 L | [1] | KIT-BEARING (CONNECTING ROD)(PISTON) | ||
| (INCLUDES BEARINGS) | ||||
| 458-7918 AB | KIT-BEARING (0.25-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 458-7939 AB | KIT-BEARING (0.50-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 458-7940 AB | KIT-BEARING (0.75-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 276-7476 B | [1] | KIT-PISTON RING | ||
| (INCLUDES PISTON RINGS) | ||||
| 389-7188 N | [1] | KIT-RING | ||
| (INCLUDES PISTON RINGS) | ||||
| 380-2065 AB | KIT-PISTON RING (0.5-MM OS) | |||
| (INCLUDES PISTON RINGS) | ||||
| 466-4849 AB | KIT-PISTON RING (1-MM OS) | |||
| (INCLUDES PISTON RINGS) | ||||
| 415-4315 N | [1] | KIT-PISTON (STANDARD) | ||
| (INCLUDES PISTON RINGS, CLIP, PIN, & PISTON) | ||||
| 380-4848 ABN | KIT-PISTON | |||
| (INCLUDES RETAINING RING, PISTON RINGS, PISTON, & PIN) | ||||
| 380-5077 ABN | KIT-PISTON | |||
| (INCLUDES RETAINING RING, PISTON RINGS, PISTON, & PIN) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
#SEBP74750053
348-3296: PISTON & ROD GP
348-3296 PISTON & ROD GP
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 2
ALSO AN ATTACHMENT
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 2
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 331-0290 | [6] | CONNECTING ROD GP | |
| (EACH INCLUDES) | ||||
| 1A. | 276-7478 | [1] | BUSHING | |
| 1B. | 323-9312 M | [2] | BOLT (M10X1X50-MM) | |
| 2. | 370-7998 N | [6] | PISTON GP | |
| 3. | 317-5482 | [6] | BEARING | |
| 4. | CL | [6] | BEARING | |
| 5. | 124-3536 N | [12] | RING-RETAINING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 436-7781 L | [1] | KIT-BEARING (CONNECTING ROD)(PISTON) | ||
| (INCLUDES BEARINGS) | ||||
| 480-4489 AB | KIT-BEARING (0.254-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 480-4490 AB | KIT-BEARING (0.51-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 480-4491 AB | KIT-BEARING (0.762-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 276-7476 BC | [1] | KIT-PISTON RING | ||
| (INCLUDES PISTON RINGS) | ||||
| 380-2065 AB | KIT-PISTON RING (0.5-MM OS) | |||
| (INCLUDES PISTON RINGS) | ||||
| 466-4849 AB | KIT-PISTON RING (1-MM OS) | |||
| (INCLUDES PISTON RINGS) | ||||
| 415-4315 N | [1] | KIT-PISTON (STANDARD) | ||
| (INCLUDES PISTON RINGS, CLIPS, PIN, & PISTON) | ||||
| 380-4848 ABN | KIT-PISTON | |||
| (INCLUDES RETAINING RINGS, PISTON RINGS, PISTON, & PIN) | ||||
| 380-5077 ABN | KIT-PISTON | |||
| (INCLUDES RETAINING RINGS, PISTON RINGS, PISTON, & PIN) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
#SEBP74750054
348-3300: PISTON & ROD GP
348-3300 PISTON & ROD GP
S/N D7A1-UP
PART OF 425-0779 CYLINDER BLOCK GP-SHORT
Type 1
ALSO AN ATTACHMENT
S/N D7A1-UP
PART OF 425-0779 CYLINDER BLOCK GP-SHORT
Type 1
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 331-0290 | [6] | CONNECTING ROD GP | |
| 276-7478 | [1] | BUSHING | ||
| 323-9312 M | [2] | BOLT (M10X1X50-MM) | ||
| 2. | 366-0149 | [6] | PISTON GP | |
| 3. | 317-5482 L | [6] | BEARING | |
| 4. | 317-5483 L | [6] | BEARING | |
| 5. | 124-3536 N | [12] | RING-RETAINING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 360-1564 L | [1] | KIT-BEARING (CONNECTING ROD)(PISTON) | ||
| (KIT INCLUDES BEARINGS) | ||||
| 389-7188 | [1] | KIT-RING | ||
| (KIT INCLUDES RINGS-PISTON) | ||||
| 389-5891 N | [1] | KIT-PISTON | ||
| (KIT INCLUDES RINGS-PISTON, RING-RETAINING, PIN, & PISTON) | ||||
| 380-4849 N | [1] | KIT-PISTON (0.5-MM OS) | ||
| (KIT INCLUDES RINGS-PISTON, RING-RETAINING, PIN, & PISTON) | ||||
| 380-5078 N | [1] | KIT-PISTON (1-MM OS) | ||
| (KIT INCLUDES RINGS-PISTON, RING-RETAINING, PIN, & PISTON) | ||||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
#SEBP74750055
348-3300: PISTON & ROD GP
348-3300 PISTON & ROD GP
S/N D7A1-UP
PART OF 425-0779 CYLINDER BLOCK GP-SHORT
Type 2
ALSO AN ATTACHMENT
S/N D7A1-UP
PART OF 425-0779 CYLINDER BLOCK GP-SHORT
Type 2
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 331-0290 | [6] | CONNECTING ROD GP | |
| (EACH INCLUDES) | ||||
| 276-7478 | [1] | BUSHING | ||
| 1A. | 323-9312 M | [2] | BOLT (M10X1X50-MM) | |
| 2. | 366-0149 N | [6] | PISTON GP | |
| 3. | 317-5482 L | [6] | BEARING | |
| 4. | CL | [6] | BEARING | |
| 5. | 124-3536 N | [12] | RING-RETAINING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 360-1564 L | [1] | KIT-BEARING (CONNECTING ROD)(PISTON) | ||
| (INCLUDES BEARINGS) | ||||
| 458-7918 AB | KIT-BEARING (0.25-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 458-7939 AB | KIT-BEARING (0.50-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 458-7940 AB | KIT-BEARING (0.75-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 276-7476 C | [1] | KIT-PISTON RING (STANDARD) | ||
| (INCLUDES RINGS) | ||||
| 380-2065 AB | KIT-PISTON RING (0.5-MM OS) | |||
| (INCLUDES RINGS) | ||||
| 466-4849 AB | KIT-PISTON RING (1-MM OS) | |||
| (INCLUDES RINGS) | ||||
| 389-5891 N | [1] | KIT-PISTON (STANDARD) | ||
| (INCLUDES RETAINING RING, PISTON RINGS, PISTON, & PIN) | ||||
| 380-4849 ABN | KIT-PISTON (0.5-MM OS) | |||
| (INCLUDES RETAINING RINGS, PISTON RINGS, PISTON, & PIN) | ||||
| 380-5078 ABN | KIT-PISTON (1-MM OS) | |||
| (INCLUDES RETAINING RINGS, PISTON RINGS, PISTON, & PIN) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
#SEBP74750056
346-1841: PLUG GP-CYLINDER HEAD
346-1841 PLUG GP-CYLINDER HEAD
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 1
ALSO AN ATTACHMENT
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 1
ALSO AN ATTACHMENT
For full view, you need register
#SEBP74750057
346-1841: PLUG GP-CYLINDER HEAD
346-1841 PLUG GP-CYLINDER HEAD
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 2
ALSO AN ATTACHMENT
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 2
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 470-4925 C | [1] | PLUG | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP74750058
417-7187: PULLEY GP-CRANKSHAFT
417-7187 PULLEY GP-CRANKSHAFT
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
#SEBP74750059
324-4551: PULLEY GP-ENGINE
324-4551 PULLEY GP-ENGINE
S/N LCA1-UP; RAR1-UP
PART OF 431-9792 FAN AR-SUCTION
ALSO AN ATTACHMENT
S/N LCA1-UP; RAR1-UP
PART OF 431-9792 FAN AR-SUCTION
ALSO AN ATTACHMENT
For full view, you need register
Information:
BASIC ENGINE
PAN GP-OIL
Disassembly and Assembly
