ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
DRIVE GP-FINALELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP74750220
369-0249: WIRING GP-ENGINE
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-1830 | [1] | RECEPTACLE AS (AUXILIARY START) | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(49-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(56-CM) | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 2. | 8S-2634 | [1] | COVER AS | |
| 3. | 9W-0742 Y | [1] | BLOCK GP-JUNCTION (BATTERY) | |
| 4. | 251-0452 | [1] | BRACKET | |
| 5. | 259-5097 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(30-CM) | |||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED)(BATTERY POSITIVE) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 301-0091 | [1] | COVER-TERMINAL (RED)(JUNCTION BLOCK) | ||
| 6. | 301-0091 | [1] | COVER-TERMINAL (RED) | |
| 7. | 388-6867 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED)(STARTING MOTOR) | ||
| 159-8049 E | CABLE (00-GA, RED)(207-CM) | |||
| 301-0091 | [1] | COVER-TERMINAL (RED)(JUNCTION BLOCK) | ||
| 8. | 4I-7889 | [1] | SPACER (11X25X45-MM THK) | |
| 9. | 4K-8864 | [1] | CLIP (LOOP) | |
| 10. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 11. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 12. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74750221
259-5052: WIRING GP-FINE SWING
259-5052 WIRING GP-FINE SWING
S/N LCA1-UP; RAR1-UP
PART OF 454-5588, 454-5589 CHASSIS AR
ALSO AN ATTACHMENT
S/N LCA1-UP; RAR1-UP
PART OF 454-5588, 454-5589 CHASSIS AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS#SEBP74750222
369-0246: WIRING GP-HYDRAULIC CONTROL
369-0246 WIRING GP-HYDRAULIC CONTROL -RETURN FILTER
S/N LCA1-UP; RAR1-UP
PART OF 369-4371, 465-1807, 479-0246 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N LCA1-UP; RAR1-UP
PART OF 369-4371, 465-1807, 479-0246 CONTROL AR-AUXILIARY
AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 4I-7889 | [1] | SPACER (11X25X45-MM THK) | |
| 3. | 116-0118 | [1] | CLIP | |
| 4. | 421-3867 | [1] | HARNESS AS-CHASSIS | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 5. | 132-5789 | [2] | CLIP (LADDER) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 8. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 9. | 7K-1181 | [13] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP74750223
369-0243: WIRING GP-MEDIUM PRESSURE
369-0243 WIRING GP-MEDIUM PRESSURE
S/N LCA1-UP; RAR1-UP
PART OF 349-2216 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N LCA1-UP; RAR1-UP
PART OF 349-2216 CONTROL AR-AUXILIARY
AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS#SEBP74750224
398-7004: WIRING GP-PLATFORM
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [6] | STRAP-CABLE | |
| 3. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 4. | 7K-1181 | [15] | STRAP-CABLE | |
| 5. | 111-4836 | [4] | CLIP | |
| 6. | 111-4838 | [2] | CLIP | |
| 7. | 111-4839 | [2] | STRAP | |
| 8. | 116-0118 | [11] | CLIP | |
| 9. | 234-1122 | [1] | COVER | |
| 10. | 251-0299 | [1] | HARNESS AS-SWITCH (SECONDARY SHUTDOWN) | |
| 2L-8074 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 11. | 441-7659 Y | [1] | HARNESS AS-PLATFORM | |
| 12. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 13. | 4D-1836 | [1] | SWITCH-TOGGLE (SECONDARY SHUTDOWN) | |
| 14. | 7X-2621 M | [7] | BOLT (M10X1.5X12-MM) | |
| 15. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 16. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74750225
398-7004: WIRING GP-PLATFORM
398-7004 WIRING GP-PLATFORM
S/N LCA1-UP; RAR1-UP
PART OF 465-6319 OPERATOR AR
ALSO AN ATTACHMENT
S/N LCA1-UP; RAR1-UP
PART OF 465-6319 OPERATOR AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [6] | STRAP-CABLE | |
| 3. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 4. | 7K-1181 | [15] | STRAP-CABLE | |
| 5. | 111-4836 | [4] | CLIP | |
| 6. | 111-4838 | [2] | CLIP | |
| 7. | 111-4839 | [2] | STRAP | |
| 8. | 116-0118 | [11] | CLIP | |
| 9. | 234-1122 | [1] | COVER | |
| 10. | 251-0299 | [1] | HARNESS AS-SWITCH (SECONDARY SHUTDOWN) | |
| 2L-8074 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 11. | 465-8799 C | [1] | HARNESS AS-PLATFORM | |
| 102-8802 | [5] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [22] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [21] | STRAP-CABLE | ||
| 8T-8737 | [31] | PLUG-SEAL | ||
| 102-7964 | [1] | PLUG-CONNECTOR (16-PIN) | ||
| 102-7965 | [17] | TERMINAL (FEMALE) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [33] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 116-0255 | [1] | TERMINAL-BLADE (10-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 121-1039 | [1] | TERMINAL (MALE) | ||
| 121-1168 | [2] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [35] | TERMINAL (MALE) | ||
| 125-4766 | [1] | PLUG-CONNECTOR (17-PIN) | ||
| 125-4841 | [1] | WEDGE-PLUG LOCK (21-PIN) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM) | |||
| 9X-3402 | [57] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [57] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8050 | [2] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [2] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 2L-8052 | [2] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [2] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 134-3296 | [1] | HOUSING-PLUG | ||
| 134-3297 | [2] | SEAL | ||
| 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 153-2620 | [1] | PLUG AS-CONNECTOR (54-PIN, BLACK) | ||
| 163-6759 | [1] | SEAL | ||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [3] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 238-2363 | [13] | TERMINAL (FEMALE) | ||
| 238-2366 | [6] | TERMINAL (MALE) | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 243-4508 | [2] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 342-2972 | [1] | CAP-CONNECTOR (2-PIN) | ||
| 342-2974 | [2] | CAP-CONNECTOR (6-PIN) | ||
| 12. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 13. | 4D-1836 | [1] | SWITCH-TOGGLE (SECONDARY SHUTDOWN) | |
| 14. | 7X-2621 M | [7] | BOLT (M10X1.5X12-MM) | |
| 15. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 16. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP74750226
369-0245: WIRING GP-QUICK COUPLER
369-0245 WIRING GP-QUICK COUPLER
S/N LCA1-UP; RAR1-UP
PART OF 456-0934 CONTROL AR-QUICK COUPLER
AN ATTACHMENT
S/N LCA1-UP; RAR1-UP
PART OF 456-0934 CONTROL AR-QUICK COUPLER
AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [9] | STRAP-CABLE | |
| 2. | 7K-1181 | [9] | STRAP-CABLE | |
| 3. | 419-6412 | [1] | HARNESS AS-SOLENOID (QUICK COUPLER) | |
| 8T-8730 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) |
#SEBP74750227
238-1570: WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
S/N LCA1-UP; RAR1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
S/N LCA1-UP; RAR1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [16] | STRAP-CABLE | |
| 2. | 9X-3495 | [1] | CLIP AS | |
| 3. | 149-5050 | [1] | RELAY (24-VOLT)(REFUELING PUMP, STOP) | |
| 3A. | 149-5050 | [1] | RELAY (24-VOLT)(REFUELING PUMP, START) | |
| 4. | 213-0772 | [1] | SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY) | |
| 5. | 238-1579 | [1] | HARNESS AS-PUMP (REFUELING) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 116-0126 | [1] | HOUSING-PLUG | ||
| 116-0128 | [2] | SEAL | ||
| 116-0255 | [2] | TERMINAL-BLADE (10-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 121-1038 | [1] | HOUSING-RECEPTACLE | ||
| 121-1039 | [2] | TERMINAL (MALE) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8067 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 149-5051 | [2] | CONNECTOR-RECEPTACLE | ||
| 149-5069 | [4] | TERMINAL-BLADE (14-GA TO 20-GA) | ||
| 149-5070 | [4] | TERMINAL-BLADE (16-GA TO 20-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 197-4385 | [1] | DIODE | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 6. | 319-1335 C | [1] | HARNESS AS-WIRING | |
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 7. | 238-1594 Y | [1] | SWITCH GP-PUSH BUTTON (REFUELING PUMP, START) | |
| 8. | 238-1596 Y | [1] | SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP) | |
| 9. | 096-2591 M | [2] | SCREW-MACHINE (M5X0.8X35-MM) | |
| 10. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 11. | 8T-0328 C | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 12. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 15. | 275-6993 | [1] | COVER | |
| 16. | 7K-1181 C | [11] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74750228
333-2988: DRIVE GP-FINAL
333-2988 DRIVE GP-FINAL -WITHOUT MOTOR
S/N LCA201-1073; RAR288-1850
PART OF 441-3013 DRIVE GP-FINAL
ALSO AN ATTACHMENT
S/N LCA201-1073; RAR288-1850
PART OF 441-3013 DRIVE GP-FINAL
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 094-0580 | [1] | PLATE (10-MM THK) | |
| 2. | 094-0611 | [6] | WASHER (47.3X76X1-MM THK) | |
| 3. | 096-1773 B | [1] | SHIM (0.15-MM THK) | |
| 096-1774 B | [1] | SHIM (0.3-MM THK) | ||
| 096-1775 B | [1] | SHIM (0.4-MM THK) | ||
| 096-1776 B | [1] | SHIM (0.5-MM THK) | ||
| 096-1777 B | [1] | SHIM (0.6-MM THK) | ||
| 096-1778 B | [1] | SHIM (0.7-MM THK) | ||
| 096-1779 B | [1] | SHIM (0.8-MM THK) | ||
| 096-1780 B | [1] | SHIM (1-MM THK) | ||
| 096-1781 B | [1] | SHIM (1.6-MM THK) | ||
| 12. | 114-1539 | [6] | PIN-DOWEL | |
| 13. | 148-4715 | [1] | GEAR-COUPLING (55-TEETH) | |
| 14. | 174-4874 | [1] | SEAL GP-DUO-CONE | |
| 15. | 333-2989 | [1] | GEAR-SUN (12-TEETH) | |
| 16. | 333-2990 | [1] | GEAR-SUN (18-TEETH) | |
| 17. | 333-2991 | [3] | GEAR-PLANETARY (38-TEETH) | |
| 18. | 333-2992 | [3] | GEAR-PLANETARY (35-TEETH) | |
| 19. | 333-2993 | [3] | SHAFT | |
| 20. | 333-2994 | [3] | SHAFT | |
| 21. | 333-2995 | [1] | CARRIER-PLANETARY | |
| 22. | 333-2996 | [1] | CARRIER-PLANETARY | |
| 23. | 333-2998 | [1] | HOUSING | |
| 24. | 353-0612 | [1] | HOUSING-MOTOR | |
| 25. | 457-7976 | [1] | COVER | |
| 26. | 457-7977 | [1] | GEAR-RING (90-TEETH) | |
| 27. | 094-0584 | [6] | WASHER (40.3X72X1-MM THK) | |
| 28. | 095-0891 | [6] | PIN-SPRING | |
| 29. | 096-3216 M | [2] | SETSCREW-SOCKET (M12X1.75X12-MM) | |
| 30. | 143-0811 M | [16] | BOLT (12X1.75X35-MM) | |
| 31. | 165-5785 | [1] | SPACER (40X60.9X1-MM THK) | |
| 32. | 227-6034 M | [14] | BOLT-FLANGE HEAD (M16X2X60-MM) | |
| 33. | 296-6220 | [2] | BALL BEARING | |
| 34. | 296-6268 | [6] | BEARING AS-ROLLER | |
| 35. | 346-5215 | [3] | BEARING AS | |
| 36. | 3E-2338 | [2] | PLUG-PIPE | |
| 37. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 6D-0692 | [1] | SEAL-O-RING | |
| 39. | 7M-8485 | [2] | SEAL-O-RING | |
| 40. | 7Y-1558 | [1] | SPACER (90X119.6X7.5-MM THK) | |
| 41. | 8T-0348 M | [28] | BOLT-SOCKET HEAD (M16X2X50-MM) | |
| 42. | 9X-8268 | [28] | WASHER (17.5X30X3.5-MM THK) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP74750229
353-0545: DRIVE GP-FINAL
353-0545 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N LCA1-200; RAR1-287
PART OF 267-6767 POWER TRAIN AR
S/N LCA1-200; RAR1-287
PART OF 267-6767 POWER TRAIN AR
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
