AVSPARE.COM
parts catalog

375-5080 VALVE GP-PUMP CONTROL S/N MFA1-UP; NAH1-UP PART OF 377-4960 HEAD GP-PUMP 336D2 XE EXCAVATOR




HYDRAULIC SYSTEM

PUMP GP
 

#SEBP74790480
 

375-5080: VALVE GP-PUMP CONTROL

375-5080 VALVE GP-PUMP CONTROL
S/N MFA1-UP; NAH1-UP
PART OF 377-4960 HEAD GP-PUMP
i05173351 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-8000 M [1] NUT-JAM (M16X1.5-THD)  
2. 191-9247 [1] WASHER (19.15X31.65X2.36-MM THK)  
3. 197-0758 [2] SCREW  
4. 198-2914 [1] NUT (3/4-32-THD)  
5. 309-3004 [1] ORIFICE  
6. 316-1438 [1] CARTRIDGE AS  
  214-7568 [2] SEAL-O-RING  
7. 321-7237 [1] SPRING  
8. [1] COIL AS  
  9X-1813 E SLEEVE (14-CM)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  230-4012 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
9. 095-1514 [1] SEAL-O-RING  
10. 4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP74790481
 

255-5747: VALVE GP-RELIEF

255-5747 VALVE GP-RELIEF -LINE
S/N MFA1-UP; NAH1-UP
PART OF 263-1962 VALVE GP-LOAD CONTROL
i02292111 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1578 [1] SEAL-O-RING  
2. 3D-2824 [2] SEAL-O-RING  
3. 103-8255 [1] SEAL-O-RING  
4. 103-8252 [2] RING  
5. 103-8254 [1] SEAL-O-RING  
6. 103-8253 [2] RING  
 

#SEBP74790482
 

270-5731: VALVE GP-RELIEF

270-5731 VALVE GP-RELIEF
S/N MFA1-UP; NAH1-UP
PART OF 378-9340, 378-9375 VALVE GP-CONTROL
FIELD REPLACEMENT ORDER @@@@@486-3207@@@@@
AN ATTACHMENT
i02602116 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1578 [1] SEAL-O-RING  
2. 103-8252 [2] RING  
3. 103-8253 [2] RING  
4. 103-8254 [1] SEAL-O-RING  
5. 103-8255 [1] SEAL-O-RING  
6. 3D-2824 [2] SEAL-O-RING  
 

#SEBP74790483
 

352-7122: VALVE GP-RELIEF

352-7122 VALVE GP-RELIEF -PILOT OPERATED
S/N MFA1-UP; NAH1-UP
PART OF 378-9340, 378-9375 VALVE GP-CONTROL
AN ATTACHMENT
i04047854 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1578 [1] SEAL-O-RING  
2. 103-8252 [2] RING  
3. 491-4176 [2] RING-BACKUP  
4. 103-8254 [1] SEAL-O-RING  
5. 103-8255 [1] SEAL-O-RING  
6. 3D-2824 [2] SEAL-O-RING  
 

#SEBP74790484
 

352-7123: VALVE GP-RELIEF

352-7123 VALVE GP-RELIEF -PILOT OPERATED
S/N MFA1-UP; NAH1-UP
PART OF 259-7692, 263-1962 VALVE GP-LOAD CONTROL
i04089492 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1578 [1] SEAL-O-RING  
2. 103-8252 [2] RING  
3. 491-4176 [2] RING-BACKUP  
4. 103-8254 [1] SEAL-O-RING  
5. 103-8255 [1] SEAL-O-RING  
6. 3D-2824 [2] SEAL-O-RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP74790485
 

360-4588: VALVE GP-RELIEF

360-4588 VALVE GP-RELIEF
S/N MFA1-UP; NAH1-UP
PART OF 322-8714 VALVE GP-TRAVEL COUNTERBALANCE
i04033053 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1583 [1] SEAL-O-RING  
2. 095-1590 [1] SEAL-O-RING  
3. 7E-4846 [1] SEAL-O-RING  
4. 099-8232 [1] SEAL-O-RING  
5. 364-1975 [1] RING-BACKUP  
6. 364-1976 [2] RING-BACKUP  
7. 364-1977 [2] RING-BACKUP  
8. 364-1978 [1] RING-BACKUP  
 

#SEBP74790486
 

369-8558: VALVE GP-RELIEF

369-8558 VALVE GP-RELIEF -PILOT OPERATED
S/N MFA1-UP; NAH1-UP
PART OF 378-9365 VALVE GP-CONTROL
Type 1
i05169933 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3510 [1] SPRING  
2. 6I-6795 [1] SPRING  
3. 107-6540 [1] COLLAR  
4. 107-6541 [1] RING-RETAINING  
5. 119-5398 [1] SCREEN-FILTER  
6. 171-0037 [1] VALVE  
7. 259-7848 [1] SLEEVE  
8. 259-7849 [1] PISTON  
9. 259-7850 [1] SLEEVE  
10. 259-7851 [1] ADJUSTER  
11. 352-6864 [1] SEAT-VALVE  
12. 6V-8978 [1] SEAL-O-RING  
13. 095-1579 [1] SEAL-O-RING  
14. 095-1584 [1] SEAL-O-RING  
15. 095-1587 [1] SEAL-O-RING  
16. 095-1590 [1] SEAL-O-RING  
17. 095-1786 [1] RING-BACKUP  
18. 287-2499 M [1] NUT (M24X2-THD)  
19. 3D-2824 [1] SEAL-O-RING  
20. 4I-7714 [1] NUT (3/4-16-THD)  
21. 6V-8218 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP74790487
 

369-8558: VALVE GP-RELIEF

369-8558 VALVE GP-RELIEF -PILOT OPERATED
S/N MFA1-UP; NAH1-UP
PART OF 378-9365 VALVE GP-CONTROL
Type 2
i06934019 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3510 [1] SPRING  
2. 6I-6795 [1] SPRING  
6. 171-0037 [1] VALVE  
7. 259-7848 [1] SLEEVE  
8. 259-7849 [1] PISTON  
9. 259-7850 [1] SLEEVE  
10. 259-7851 [1] ADJUSTER  
11. 352-6864 [1] SEAT-VALVE  
12. 6V-8978 [1] SEAL-O-RING  
13. 095-1579 [1] SEAL-O-RING  
14. 095-1584 [1] SEAL-O-RING  
15. 095-1587 [1] SEAL-O-RING  
16. 095-1590 [1] SEAL-O-RING  
17. 095-1786 [1] RING-BACKUP  
18. 287-2499 M [1] NUT (M24X2-THD)  
19. 3D-2824 [1] SEAL-O-RING  
20. 7F-2050 [1] LOCKNUT (3/4-16-THD)  
21. 6V-8218 [1] SEAL-O-RING  
22. 480-2133 C [1] VALVE AS-CONTROL  
  119-5398 [1] SCREEN-FILTER (RELIEF VALVE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP74790488
 

385-5641: VALVE GP-RELIEF

385-5641 VALVE GP-RELIEF -PILOT OPERATED
S/N MFA1-UP; NAH1-UP
PART OF 378-9359, 378-9369, 426-4759, 426-4769 VALVE GP-MAIN CONTROL
AN ATTACHMENT
i05307092 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-0167 [1] RING-BACKUP  
2. 8L-2779 [1] SEAL-O-RING  
3. 033-6036 [2] SEAL-O-RING  
4. 3P-0647 [1] SEAL-O-RING  
5. 9J-0707 [2] RING-BACKUP  
6. 2P-2975 [1] SEAL-O-RING  
7. 033-5879 [1] SEAL-O-RING  
8. 9J-0705 [1] RING-BACKUP  
 

#SEBP74790489
 

387-9508: VALVE GP-RELIEF

387-9508 VALVE GP-RELIEF -DIRECT OPERATED
S/N MFA1-UP; NAH1-UP
PART OF 378-9365 VALVE GP-CONTROL
i05169929 SEBP7479
  For full view, you need register

Parts for your 336D2 XE EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-9780 J [1] SEAL-O-RING  
2. 161-6149 J [1] SEAL-O-RING  
3. 161-6161 J [2] RING-BACKUP  
   
    AVAILABLE REPAIR KIT(S):
  133-5545 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Procedure to Test for Boom, Stick, and Bucket Intermittent Slow Cycle Times on Certain Excavators{5050}
Procedure to Test for Boom, Stick, and Bucket Intermittent Slow Cycle Times on Certain Excavators{5050}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BREATHER ON CERTAIN 336D, 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BREATHER ON CERTAIN 336D, 336E, AND 336F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Pump Control Valve
336D2 XE Excavator Machine System Specifications
Pump Head (Main)
336D2 XE Excavator Machine System Specifications
Gear Pump
336D2 XE Excavator Machine System Specifications
Main Hydraulic Pump
336D2 XE Excavator Machine System Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BREATHER ON CERTAIN 336D, 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BREATHER ON CERTAIN 336D, 336E, AND 336F EXCAVATORS
Service Letter-Asia
Systems Operation
Main Hydraulic Pump
336D2 XE Excavator Machine Systems
Gear Pump (Pilot)
336D2 XE Excavator Machine Systems
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BREATHER ON CERTAIN 336D, 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BREATHER ON CERTAIN 336D, 336E, AND 336F EXCAVATORS
Testing and Adjusting
Main Hydraulic Pump Air - Purge
336D2 XE Excavator Machine System
Swing Speed and Overswing on Level Ground - Check
336D2 XE Excavator Machine System
Swing Speed and Swing Drift on a Slope - Check
336D2 XE Excavator Machine System
Swashplate - Calibrate
336D2 XE Excavator Machine System
Main Pump (Flow) - Test - Hydraulic Power
336D2 XE Excavator Machine System
Gear Pump (Pilot) - Test
336D2 XE Excavator Machine System
Pump Control (Output Flow) - Adjust
336D2 XE Excavator Machine System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Troubleshooting
Disassembly and Assembly
Gear Pump (Pilot) - Remove and Install
336D2 Excavator Machine Systems
Main Hydraulic Pump - Remove and Install
336D2 Excavator Machine Systems
Main Hydraulic Pump - Disassemble
336D2 Excavator Machine Systems
Main Hydraulic Pump - Assemble
336D2 Excavator Machine Systems
Gear Pump (Auxiliary) - Remove and Install
336D2 Excavator Machine Systems
Gear Pump (Auxiliary) - Disassemble
336D2 Excavator Machine Systems
Gear Pump (Auxiliary) - Assemble
336D2 Excavator Machine Systems
Service Magazine
A New Breather Design for the Main Pump is Now Used for Certain 336D2, 336E, 336F, and 340F Excavators and 336F Mobile Hydraulic Power Units {5070}
A New Breather Design for the Main Pump is Now Used for Certain 336D2, 336E, 336F, and 340F Excavators and 336F Mobile Hydraulic Power Units {5070}

Caterpillar Parts SIS Catalog 336D2 XE :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.