AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

368-8296 STARTING AID GP-ETHER S/N HJD1-UP PART OF 439-1603, 439-1604 OPTION AR-COLD WEATHER 390F L EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
STARTING AID GP
STARTING MOTOR GP
SWITCH GP

EXCAVATOR 390F L EXCAVATOR HJD
 390F L Excavator HJD00001-UP (MACHINE) POWERED BY C18 Engine SEBP7481 390F L HJD   (2015)

ELECTRICAL AND STARTING SYSTEM

STARTING AID GP
STARTING AID GP-ETHER
368-8296 STARTING AID GP-ETHER
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
 

#SEBP74810380
 

368-8296: STARTING AID GP-ETHER

368-8296 STARTING AID GP-ETHER
S/N HJD1-UP
PART OF 439-1603, 439-1604 OPTION AR-COLD WEATHER
i05819265 SEBP7481
3688296 STARTING AID GP-ETHER Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 276-8503 [1] FITTING AS  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
2. 239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
3. 256-6881 [1] ATOMIZER GP-ETHER  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
4. 339-6891 [2] STRAP-CABLE  
5. 339-7043 [1] SUPPORT  
6. 394-7556 [1] PLATE AS  
7. 135-8575 [4] BOLT AS  
8. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
9. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
10. 174-9169 E TUBE (120-CM)  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER)
  A   NOT PART OF THIS GROUP
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810381
 

349-6536: STARTING MOTOR GP-ELECTRIC

349-6536 STARTING MOTOR GP-ELECTRIC
S/N TXW1-UP
24-VOLT
PART OF 422-9432 STARTING MOTOR GP-ELECTRIC
i05494635 SEBP7481
3496536 STARTING MOTOR GP-ELECTRIC Parts scheme 3496536 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
14. 3L-3380 [1] BUSHING-TERMINAL  
15. 8C-3089 [1] SEAL-O-RING  
16. 4M-1853 [1] LEVER AS-SHIFT  
17. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
18. 7L-2894 [4] GASKET  
19. 4M-1831 [4] PLUG-LEVER HOUSING  
20. 4M-1854 [1] SHAFT-LEVER  
21. 1H-1023 [1] SEAL-O-RING  
22. 2D-6392 [1] SEAL-O-RING  
23. 528-6787 [1] HOUSING AS-DRIVE  
24. 6N-3826 [1] DRIVE AS-MOTOR  
25. 2H-3429 [1] RING-RETAINING  
26. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
27. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 6N-3279 [1] INSULATOR  
29. 0S-1597 [13] BOLT (1/4-28X1-IN)  
30. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
31. 1H-2629 [3] STRIP-INSULATION  
32. 7M-0324 [1] COIL AS-FIELD  
33. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
34. 7F-3488 [6] SHOE-POLE  
35. 7M-8651 [1] ARMATURE AS  
36. 7M-0325 [1] INSULATOR  
37. 3T-9524 [6] BRUSH AS  
38. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 3R-8801 [1] CLAMP  
41. 8F-1434 [2] LOCKWASHER  
42. 6V-8188 [6] NUT (1/2-13-THD)  
43. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
44. 4B-2049 [6] NUT (10-32-THD)  
45. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
46. 3T-9494 [6] SPRING  
47. 349-6255 [1] HOUSING AS  
48. 9G-4101 [1] BUSHING-END  
49. 3T-3424 [3] PLUG-FELT  
50. 3T-3423 [3] CUP  
51. 1M-9968 [1] BUSHING  
53. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
54. 4M-1896 [1] BUSHING-TERMINAL  
55. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
56. 125-6535 [1] COVER-STARTING MOTOR  
57. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
58. 352-7993 [1] KIT-SWITCH  
    (INCLUDES SWITCH AS, COVER, BOLTS, ANCHOR & CLAMP)
59. 351-8955 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810382
 

422-9432: STARTING MOTOR GP-ELECTRIC

422-9432 STARTING MOTOR GP-ELECTRIC
S/N TXW1-2635
24-VOLT
PART OF 364-5412, 467-2585 ENGINE AR-COMPLETE
CANNOT BE USED WITH APPLICATIONS WITH SOUND PANEL
i05426805 SEBP7481
4229432 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 349-6536 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
3. 355-1642 Y [1] HARNESS AS-SWITCH  
4. 382-9015 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(22-CM)  
5. 129-3172 [2] STUD-MOUNTING (3/8-16X1.564-IN)  
6. 8M-7145 [1] WASHER (10.2X28.5X5-MM THK)  
7. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
8. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810383
 

422-9432: STARTING MOTOR GP-ELECTRIC

422-9432 STARTING MOTOR GP-ELECTRIC
S/N TXW1-UP
24-VOLT
PART OF 467-2585, 484-3456 ENGINE AR-COMPLETE
CANNOT BE USED WITH APPLICATIONS WITH SOUND PANEL
i06847342 SEBP7481
4229432 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 478-9867 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
3. 355-1642 Y [1] HARNESS AS-SWITCH  
4. 382-9015 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(22-CM)  
5. 129-3172 [2] STUD-MOUNTING (3/8-16X1.564-IN)  
6. 8M-7145 [1] WASHER (10.2X28.5X5-MM THK)  
7. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
8. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810384
 

478-9867: STARTING MOTOR GP-ELECTRIC

478-9867 STARTING MOTOR GP-ELECTRIC -24-VOLT
S/N TXW2636-UP
PART OF 422-9432 STARTING MOTOR GP-ELECTRIC
i06753640 SEBP7481
4789867 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
7A. 9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 533-1539 KIT-SEAL  
    (KIT INCLUDES GASKET, BOOT, O-RINGS, SEAL, & CABLE TIE)
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
14. 3L-3380 [1] BUSHING-TERMINAL  
16. 4M-1853 [1] LEVER AS-SHIFT  
17. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 4M-1831 [4] PLUG-LEVER HOUSING  
20. 4M-1854 [1] SHAFT-LEVER  
23. 494-6475 [1] HOUSING AS-DRIVE  
24. 6N-3826 [1] DRIVE AS-MOTOR  
25. 2H-3429 [1] RING-RETAINING  
26. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
27. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 6N-3279 [1] INSULATOR  
29. 0S-1597 [13] BOLT (1/4-28X1-IN)  
30. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
31. 1H-2629 [3] STRIP-INSULATION  
32. 7M-0324 [1] COIL AS-FIELD  
33. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
34. 7F-3488 [6] SHOE-POLE  
35. 7M-8651 [1] ARMATURE AS  
36. 7M-0325 [1] INSULATOR  
37. 3T-9524 [6] BRUSH AS  
38. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
39. 3R-8801 [1] CLAMP  
40. 8F-1434 [2] LOCKWASHER  
41. 6V-8188 [6] NUT (1/2-13-THD)  
42. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
43. 4B-2049 [6] NUT (10-32-THD)  
44. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
45. 3T-9494 [6] SPRING  
46. 349-6255 [1] HOUSING AS  
47. 511-7982 [1] SOLENOID AS (STARTER)(24-VOLT)  
  3R-8801 [1] CLAMP  
48. 3T-3424 [3] PLUG-FELT  
49. 3T-3423 [3] CUP  
50. 1M-9968 [1] BUSHING  
51. 352-7993 [1] KIT-SWITCH  
    (INCLUDES SWITCH AS, COVER, BOLTS, ANCHOR & CLAMP)
52. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
53. 4M-1896 [1] BUSHING-TERMINAL  
54. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
55. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810385
 

7N-0718: SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N HJD1-UP
PART OF 423-2267 BATTERY & WIRING GP
i01327157 SEBP7481
7N0718 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3922 [2] LOCKWASHER  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 9F-5644 [2] LOCKWASHER  
4. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
5. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
 

#SEBP74810386
 

383-5711: SWITCH GP-POSITION

383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N HJD1-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
i06757660 SEBP7481
3835711 SWITCH GP-POSITION Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
  5P-5998 D TUBE (0.3-M)  
4. 5C-8312 M [2] NUT (M4X0.7-THD)  
5. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP74810387
 

238-1594: SWITCH GP-PUSH BUTTON

238-1594 SWITCH GP-PUSH BUTTON -REFUELING PUMP, START
S/N HJD1-UP
PART OF 498-6693 KIT-FUEL PUMP, 377-8168 WIRING GP-REFUELING PUMP
i03157181 SEBP7481
2381594 SWITCH GP-PUSH BUTTON Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-9442 [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
  1S-0812 [2] SCREW-TAPPING  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (REFUELING PUMP, START)  
2. 238-1595 [1] HARNESS AS-SWITCH (REFUELING PUMP, START)  
3. 125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(6-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP74810388
 

238-1596: SWITCH GP-PUSH BUTTON

238-1596 SWITCH GP-PUSH BUTTON -REFUELING PUMP, STOP
S/N HJD1-UP
PART OF 498-6693 KIT-FUEL PUMP, 377-8168 WIRING GP-REFUELING PUMP
i03157201 SEBP7481
2381596 SWITCH GP-PUSH BUTTON Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-4184 [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
  1S-0812 [2] SCREW-TAPPING  
  3E-7389 [1] SWITCH-PUSH BUTTON (REFUELING PUMP, STOP)  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
2. 238-1597 [1] HARNESS AS-SWITCH (REFUELING PUMP, STOP)  
3. 125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)(6-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP74810389
 

255-2752: SWITCH GP-START

255-2752 SWITCH GP-START
S/N HJD1-UP
PART OF 328-0246 PANEL GP-SWITCH
i05493304 SEBP7481
2552752 SWITCH GP-START Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-6799 [1] NUT-MOUNTING (1-32-THD)  
2. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 20-GA)  
4. 8T-8737 [1] PLUG-SEAL  
 

Information:

Operation and Maintenance Manual
Ether Starting Aid Cylinder - Replace - If Equipped
390F Excavator
Engine Starting
390F Excavator
Specifications
Ether Starting Aid
390F Excavator Machine System
Ether Starting Aid
390F Excavator Machine System
Troubleshooting
Ether Starting Aid - Test
C13, C15, and C18 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 390F L :

SENSOR-TEMPERATURE
256-6453 SENSOR-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
300-9806 SENSOR GP-SPEED
SENSOR GP-SPEED
300-9805 SENSOR GP-SPEED
SENSOR GP-PRESSURE
451-4457 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
338-6971 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
338-6970 SENSOR GP-PRESSURE
STARTING MOTOR GP-ELECTRIC
349-6536 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
422-9432 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
422-9432 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
478-9867 STARTING MOTOR GP-ELECTRIC
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-POSITION
383-5711 SWITCH GP-POSITION
SWITCH GP-PUSH BUTTON
238-1594 SWITCH GP-PUSH BUTTON
SWITCH GP-PUSH BUTTON
238-1596 SWITCH GP-PUSH BUTTON
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.