AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

417-8658 WIRING GP-SENSOR S/N TXW1-UP PART OF 364-5412, 467-2585, 484-3456 ENGINE AR-COMPLETE 390F L


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 390F L EXCAVATOR HJD
 390F L Excavator HJD00001-UP (MACHINE) POWERED BY C18 Engine SEBP7481 390F L HJD   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-REFUELING PUMP
377-8168 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
504-1836 WIRING GP-REFUELING PUMP
WIRING GP-SENSOR
417-8658 WIRING GP-SENSOR
WIRING GP-UNIT INJECTOR
334-5837 WIRING GP-UNIT INJECTOR
WIRING GP-VALVE
352-2617 WIRING GP-VALVE
WIRING GP-VALVE
352-2618 WIRING GP-VALVE
 

#SEBP74810440
 

417-8658: WIRING GP-SENSOR

417-8658 WIRING GP-SENSOR
S/N TXW1-UP
PART OF 364-5412, 467-2585, 484-3456 ENGINE AR-COMPLETE
i05429070 SEBP7481
4178658 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 178-1780 [1] CLIP  
3. 183-4274 [1] BRACKET  
4. 419-8888 [1] PLATE AS  
5. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
6. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
7. 132-5789 [1] CLIP (LADDER)  
8. 297-3218 [1] CLIP (LADDER)  
9. 338-9029 Y [1] HARNESS AS-SENSOR (COOLANT TEMPERATURE)  
10. 4P-7581 [4] CLIP (LADDER)  
11. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810441
 

334-5837: WIRING GP-UNIT INJECTOR

334-5837 WIRING GP-UNIT INJECTOR
S/N TXW1-UP
NON BRAKE
PART OF 364-5412, 467-2585, 484-3456 ENGINE AR-COMPLETE
FOR USE WITH ENGINES WITH MEUI-A INJECTORS
i05429071 SEBP7481
3345837 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [3] STRAP-CABLE  
2. 7E-6508 [6] CAP AS (UNIT INJECTOR)  
3. 326-4512 [4] MOUNTING-CABLE TIE  
4. 514-5313 Y [1] HARNESS AS-ENGINE  
5. 166-5396 [2] SCREW-WASHER HEAD (1/4-20X0.5-IN)  
6. 359-4893 [1] RING-RETAINING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810442
 

352-2617: WIRING GP-VALVE

352-2617 WIRING GP-VALVE
S/N HJD1-UP
PART OF 459-9916 VALVE AR-MAIN CONTROL, 352-2618 WIRING GP-VALVE
i05411339 SEBP7481
3522617 WIRING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 357-8318 [1] HARNESS AS-VALVE  
  7K-1181 [4] STRAP-CABLE  
  233-2106 [4] COLLAR  
  [1] HARNESS AS-VALVE  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(1.9-M)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(5.1-M)  
  8T-8737 [73] PLUG-SEAL  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)  
  9X-3402 [149] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [149] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  134-2540 [2] RECEPTACLE AS-CONNECTOR (3-PIN)  
  9X-3401 [27] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [27] PIN-CONNECTOR (14-GA TO 16-GA)  
  174-0503 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES WEDGES, PLUG AS & INTERFACE SEAL)
  239-7356 [1] PLUG AS-CONNECTOR (12-PIN)  
  230-4009 [4] PLUG AS-CONNECTOR (12-PIN)  
    (EACH PLUG AS INCLUDES)
  455-0709 [1] SEAL-CONNECTOR  
  230-4010 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  230-4011 [22] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  230-4013 [9] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  455-0705 [1] SEAL-CONNECTOR  
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  455-0707 [1] SEAL-CONNECTOR  
  230-5011 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  231-2297 [2] RECEPTACLE AS-CONNECTOR (8-PIN)  
  231-2296 [2] PLUG AS-CONNECTOR (8-PIN)  
  231-2298 [2] PLUG AS  
  231-2295 [2] PLUG AS-CONNECTOR (8-PIN)  
    (EACH PLUG AS INCLUDES)
  455-0708 [1] SEAL-CONNECTOR  
  239-7357 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  329-3734 B TAPE-ELECTRICAL  
2. 440-4784 [1] BRACKET AS  
3. 132-5789 [3] CLIP (LADDER)  
4. 134-3771 [4] SPACER (12.52X17.14X114-MM THK)  
5. 233-2106 [2] COLLAR  
6. 277-1873 [1] CLIP (LADDER)  
7. 294-4826 M [4] BOLT-SOCKET HEAD (M8X1.25X80-MM)  
8. 352-3964 [1] CLIP (LADDER)  
9. 352-3968 [1] CLIP (LADDER)  
10. 4P-7581 [2] CLIP (LADDER)  
11. 4P-8134 [1] CLIP (LADDER)  
12. 7K-1181 [15] STRAP-CABLE  
13. 7X-0457 M [4] BOLT (M8X1.25X130-MM)  
14. 7X-2536 M [10] BOLT (M8X1.25X14-MM)  
15. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4177 M [2] BOLT (M8X1.25X90-MM)  
17. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
18. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-4224 [19] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-4970 M [2] BOLT (M6X1X14-MM)  
21. 4P-7582 [1] CLIP (LADDER)  
22. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP74810443
 

352-2618: WIRING GP-VALVE

352-2618 WIRING GP-VALVE
S/N HJD1-UP
PART OF 459-9917 VALVE AR-MAIN CONTROL
i05411323 SEBP7481
3522618 WIRING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [12] STRAP-CABLE  
2. 352-2616 [1] HARNESS AS-VALVE  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(28-CM)  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.2-M)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [14] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
  230-4010 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  230-4011 [4] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
3. 352-2617 Y [1] WIRING GP-VALVE  
4. 132-5789 [4] CLIP (LADDER)  
5. 4P-7582 [1] CLIP (LADDER)  
6. 4P-8134 [1] CLIP (LADDER)  
7. 7X-2536 M [4] BOLT (M8X1.25X14-MM)  
8. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 7X-2552 M [1] BOLT (M16X2X30-MM)  
10. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810444
 

455-2768: DRIVE GP-FINAL

455-2768 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, LH
S/N HJD1-UP
PART OF 353-0573 FINAL DRIVE & MOUNTING GP
i05816830 SEBP7481
4552768 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-3014 Y [1] SPROCKET GP  
2. 455-2770 Y [1] DRIVE GP-FINAL (WITH MOTOR, LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810445
 

455-2769: DRIVE GP-FINAL

455-2769 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, RH
S/N HJD1-UP
PART OF 353-0573 FINAL DRIVE & MOUNTING GP
i05816837 SEBP7481
4552769 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-3014 Y [1] SPROCKET GP  
2. 455-2771 Y [1] DRIVE GP-FINAL (WITH MOTOR, RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810446
 

455-2770: DRIVE GP-FINAL

455-2770 DRIVE GP-FINAL -WITH MOTOR, LH
S/N HJD1-UP
PART OF 455-2768 DRIVE GP-FINAL
i05818055 SEBP7481
4552770 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9198 Y [1] MOTOR & MTG GP-TRAVEL  
2. 455-2772 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, LH)  
3. 114-1540 [1] PIN-DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810447
 

455-2771: DRIVE GP-FINAL

455-2771 DRIVE GP-FINAL -WITH MOTOR, RH
S/N HJD1-UP
PART OF 455-2769 DRIVE GP-FINAL
i05818054 SEBP7481
4552771 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9198 Y [1] MOTOR & MTG GP-TRAVEL  
2. 455-2775 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, RH)  
3. 114-1540 [1] PIN-DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP74810448
 

455-2772: DRIVE GP-FINAL

455-2772 DRIVE GP-FINAL -WITHOUT MOTOR, LH
S/N HJD1-UP
PART OF 455-2770 DRIVE GP-FINAL
i05818080 SEBP7481
4552772 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6373 [1] SHIM (1.2-MM THK)  
2. 6I-6375 [1] SHIM (1.4-MM THK)  
3. 7Y-0807 [1] SHIM (1.6-MM THK)  
4. 7Y-0808 B [1] SHIM (1.6-MM THK)  
5. 7Y-1090 [1] GEAR-RING (66-TEETH)  
6. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
7. 148-4575 [3] GEAR-PLANETARY (31-TEETH)  
8. 148-4579 [1] GEAR-SUN (22-TEETH)  
9. 148-4580 [1] GEAR-RING (101-TEETH)  
10. 148-4582 [1] HOUSING  
11. 148-4585 [1] GEAR-COUPLING (95-TEETH)  
12. 148-4616 [1] GEAR-SUN (37-TEETH)  
13. 148-4617 [1] RING-RETAINING  
14. 188-2103 [1] SEAL GP  
15. 191-2508 [1] SPACER (231X261X10-MM THK)  
16. 199-4533 [4] GEAR-PLANETARY (21-TEETH)  
17. 199-4545 [1] GEAR-SUN (21-TEETH)  
18. 199-4546 [3] GEAR-PLANETARY (22-TEETH)  
19. 510-6431 [8] BEARING AS  
20. [14] WASHER (79.3X134X3-MM THK)  
21. 199-4650 [1] CARRIER-PLANETARY  
22. 199-4663 [1] COVER-HOUSING  
23. 199-4665 [1] CARRIER-PLANETARY  
24. 199-4666 [1] CARRIER-PLANETARY  
25. 510-6430 [3] BEARING AS  
26. 510-6432 [3] BEARING AS  
27. 199-4671 [6] WASHER (49.3X84X1-MM THK)  
28. 199-4688 [3] SHAFT-PLANETARY  
29. 199-4689 [3] SHAFT-PLANETARY  
30. 199-4690 [4] SHAFT-PLANETARY  
31. 227-6177 [1] SHIM (0.3-MM THK)  
32. 227-6178 [1] SHIM (0.6-MM THK)  
33. 227-6179 [1] SHIM (0.7-MM THK)  
34. 227-6180 [1] SHIM (0.8-MM THK)  
35. 487-5910 [1] HOUSING-MOTOR (LH)  
36. 451-2178 [20] WASHER-HARD (33X56X6-MM THK)  
37. 453-4193 M [20] BOLT (M30X3.5X260-MM)  
38. 095-0891 [3] PIN-SPRING  
39. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
40. 099-5194 [7] PIN-SPRING  
41. 114-1541 [6] PIN-DOWEL  
42. 163-6082 [1] CONE  
43. 163-6083 [1] CUP  
44. 171-8706 [1] CONE  
45. 171-8707 [1] CUP  
46. 3E-2338 [2] PLUG-PIPE  
47. 5P-4981 [1] RING-RETAINING  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-0640 [1] SEAL-O-RING  
50. 7Y-0795 [1] SPACER (115X145.1X25.5-MM THK)  
51. 7Y-1492 [1] SPACER (67X101.1X10-MM THK)  
52. 7Y-5215 M [22] BOLT-SOCKET HEAD (M24X3X90-MM)  
53. 8T-0273 M [16] BOLT-SOCKET HEAD (M12X1.75X40-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP74810449
 

455-2775: DRIVE GP-FINAL

455-2775 DRIVE GP-FINAL -WITHOUT MOTOR, RH
S/N HJD1-UP
PART OF 455-2771 DRIVE GP-FINAL
i05818075 SEBP7481
4552775 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 390F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6373 B [1] SHIM (1.2-MM THK)  
2. 6I-6375 B [1] SHIM (1.4-MM THK)  
3. 7Y-0807 B [1] SHIM (1.6-MM THK)  
4. 7Y-0808 B [1] SHIM (1.6-MM THK)  
5. 7Y-1090 [1] GEAR-RING (66-TEETH)  
6. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
7. 148-4575 [3] GEAR-PLANETARY (31-TEETH)  
8. 148-4579 [1] GEAR-SUN (22-TEETH)  
9. 148-4580 [1] GEAR-RING (101-TEETH)  
10. 148-4582 [1] HOUSING  
11. 148-4585 [1] GEAR-COUPLING (95-TEETH)  
12. 148-4616 [1] GEAR-SUN (37-TEETH)  
13. 148-4617 [1] RING-RETAINING  
14. 188-2103 [1] SEAL GP  
15. 191-2508 [1] SPACER (231X261X10-MM THK)  
16. 199-4533 [4] GEAR-PLANETARY (21-TEETH)  
17. 199-4545 [1] GEAR-SUN (21-TEETH)  
18. 199-4546 [3] GEAR-PLANETARY (22-TEETH)  
19. 510-6431 [8] BEARING AS  
20. [14] WASHER (79.3X134X3-MM THK)  
21. 199-4650 [1] CARRIER-PLANETARY  
22. 199-4663 [1] COVER-HOUSING  
23. 199-4665 [1] CARRIER-PLANETARY  
24. 199-4666 [1] CARRIER-PLANETARY  
25. 510-6430 [3] BEARING AS  
26. 510-6432 [3] BEARING AS  
27. 199-4671 [6] WASHER (49.3X84X1-MM THK)  
28. 199-4688 [3] SHAFT-PLANETARY  
29. 199-4689 [3] SHAFT-PLANETARY  
30. 199-4690 [4] SHAFT-PLANETARY  
31. 227-6177 B [1] SHIM (0.3-MM THK)  
32. 227-6178 B [1] SHIM (0.6-MM THK)  
33. 227-6179 B [1] SHIM (0.7-MM THK)  
34. 227-6180 B [1] SHIM (0.8-MM THK)  
35. 487-5911 [1] HOUSING-MOTOR  
36. 451-2178 [20] WASHER-HARD (33X56X6-MM THK)  
37. 453-4193 M [20] BOLT (M30X3.5X260-MM)  
38. 095-0891 [3] PIN-SPRING  
39. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
40. 099-5194 [7] PIN-SPRING  
41. 114-1541 [6] PIN-DOWEL  
42. 163-6082 [1] CONE  
43. 163-6083 [1] CUP  
44. 171-8706 [1] CONE  
45. 171-8707 [1] CUP  
46. 3E-2338 [2] PLUG-PIPE  
47. 5P-4981 [1] RING-RETAINING  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-0640 [1] SEAL-O-RING  
50. 7Y-0795 [1] SPACER (115X145.1X25.5-MM THK)  
51. 7Y-1492 [1] SPACER (67X101.1X10-MM THK)  
52. 7Y-5215 M [22] BOLT-SOCKET HEAD (M24X3X90-MM)  
53. 8T-0273 M [16] BOLT-SOCKET HEAD (M12X1.75X40-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
390F Excavator
Battery - Recycle
390F Excavator
SmartBoom Operation - If Equipped
390F Excavator
SmartBoom Control - If Equipped
390F Excavator
Power Receptacle - If Equipped
390F Excavator
Fuses - Replace
390F Excavator
Battery Disconnect Switch
390F Excavator
Camera Harness - Disconnect and Connect
390F Excavator
Light and Harness - Disconnect and Connect - Rear Work Light
390F Excavator
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for the <NOBR>458-9196</NOBR> Auxiliary Control Ar (Tool Control) on Certain 390F Hydraulic Excavators {1408, 5057, 5705, 7301, 7405, 7557}
Installation Procedure for the 458-9196 Auxiliary Control Ar (Tool Control) on Certain 390F Hydraulic Excavators {1408, 5057, 5705, 7301, 7405, 7557}
Installation of the 377-8163 Chassis Wiring Gp (Tool Control) on Certain 390F Hydraulic Excavators{1408}
Installation of the 377-8163 Chassis Wiring Gp (Tool Control) on Certain 390F Hydraulic Excavators{1408}
Installation Procedure for the <NOBR>458-7612</NOBR> Auxiliary Hydraulic Control Ar on Certain 390F Hydraulic Excavators {1408, 5051, 5057, 7405, 7557}
Installation Procedure for the 458-7612 Auxiliary Hydraulic Control Ar on Certain 390F Hydraulic Excavators {1408, 5051, 5057, 7405, 7557}
Installation Procedure for <NOBR>377-8165</NOBR> Chassis Wiring Gp for Certain Hydraulic Excavators {1408}
Installation Procedure for 377-8165 Chassis Wiring Gp for Certain Hydraulic Excavators {1408}
Installation Procedure for the <NOBR>471-6888</NOBR> Coupler Control Ar on Certain Hydraulic Excavators {1408, 1901, 5057, 7405, 7557}
Installation Procedure for the 471-6888 Coupler Control Ar on Certain Hydraulic Excavators {1408, 1901, 5057, 7405, 7557}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Installation of the <NOBR>492-1508</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5258, 7405, 7557}
Installation of the 492-1508 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5258, 7405, 7557}
Installation of the <NOBR>360-6218</NOBR> Electronic Control Wiring Gp on Certain Hydraulic Excavators {1408}
Installation of the 360-6218 Electronic Control Wiring Gp on Certain Hydraulic Excavators {1408}
Cat Production Measurement System (CPM) Auto Calibration Procedure for Certain 336F XE, 349F XE, 352F XE, 374F, and 390F Excavators {1408, 1901, 7610, 7620}
Cat Production Measurement System (CPM) Auto Calibration Procedure for Certain 336F XE, 349F XE, 352F XE, 374F, and 390F Excavators {1408, 1901, 7610, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
Technical Information Bulletin
Bracket Assembly for the Alternator Harness May Fail on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1401, 1402, 1408}
Bracket Assembly for the Alternator Harness May Fail on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1401, 1402, 1408}
Specifications
Electrical Ground Stud
C15 and C18 Engines for Caterpillar Built Machines
Pressure Switch (Refrigerant Pressure Cutoff)
390F Excavator Machine System
Wiring (Cab)
390F Excavator Machine System
Radio (AM/FM)
390F Excavator Machine System
Wiring (Cab)
390F Excavator Machine System
Wiring (Cab)
390F Excavator Machine System
Wiring (Battery)
390F Excavator Machine System
Wiring (Auxiliary Start Receptacle)
390F Excavator Machine System
Fuel Level Sender
390F Excavator Machine System
Electronic Control Wiring Group
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Switches
374F and 390F Excavators Tool Control System
Sensors
374F and 390F Excavators Tool Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR HARNESS BRACKET ON CERTAIN 390F EXCAVATORS
Testing and Adjusting
Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines
Connector Contact Description
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Overload Warning - Set - If Equipped
390F Excavator Machine System
System Schematic
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat® Production Measurement Application
Troubleshooting
Electrical Connectors - Inspect
C13, C15, and C18 Engines for Caterpillar Built Machines
Electrical Connectors
C13, C15, and C18 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Connector Locations
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Wiring Harness (Open Circuit) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Wiring Harness (Short Circuit) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
System Schematic
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Connector Contact Description
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900}
A New Engine Wiring Harness Assembly Is Now Used For Certain C18 Machine Engines {1000, 1408, 1900}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Alternator Bracket Assembly is Now Available on Certain 374F and 390F Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1401, 1402, 1408}
New Alternator Bracket Assembly is Now Available on Certain 374F and 390F Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1401, 1402, 1408}
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Machine Engines {1290, 1408}
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Machine Engines {1290, 1408}
Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}
Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}
Improved Cab Console Harness are Now Used For 374F and 390F Excavators {1408}
Improved Cab Console Harness are Now Used For 374F and 390F Excavators {1408}

Caterpillar Parts SIS Catalog 390F L :

WIRING GP-REFUELING PUMP
504-1836 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
377-8168 WIRING GP-REFUELING PUMP
WIRING GP-PLATFORM
350-8260 WIRING GP-PLATFORM
WIRING GP-GRADE CONTROL
504-1048 WIRING GP-GRADE CONTROL
WIRING GP-FRONT
528-5900 WIRING GP-FRONT
WIRING GP-FRONT
527-0954 WIRING GP-FRONT
WIRING GP-FRONT
527-0953 WIRING GP-FRONT
WIRING GP-FRONT
527-0952 WIRING GP-FRONT
WIRING GP-UNIT INJECTOR
334-5837 WIRING GP-UNIT INJECTOR
WIRING GP-VALVE
352-2617 WIRING GP-VALVE
WIRING GP-VALVE
352-2618 WIRING GP-VALVE
DRIVE GP-FINAL
455-2768 DRIVE GP-FINAL
DRIVE GP-FINAL
455-2769 DRIVE GP-FINAL
DRIVE GP-FINAL
455-2770 DRIVE GP-FINAL
DRIVE GP-FINAL
455-2771 DRIVE GP-FINAL
DRIVE GP-FINAL
455-2772 DRIVE GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.