BASIC ENGINE
PISTON & ROD GPCYLINDER HEAD GP
PULLEY GP
VALVE MECHANISM GP
LUBRICATION SYSTEM
FILLER GP-ENGINE OILFILTER GP-ENGINE OIL
BASIC ENGINE
PISTON & ROD GP
#SEBP74860040
348-3300: PISTON & ROD GP
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 331-0290 | [6] | CONNECTING ROD GP | |
| (EACH INCLUDES) | ||||
| 276-7478 | [1] | BUSHING | ||
| 1A. | 323-9312 M | [2] | BOLT (M10X1X50-MM) | |
| 2. | 366-0149 N | [6] | PISTON GP | |
| 3. | 317-5482 L | [6] | BEARING | |
| 4. | CL | [6] | BEARING | |
| 5. | 124-3536 N | [12] | RING-RETAINING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 360-1564 L | [1] | KIT-BEARING (CONNECTING ROD)(PISTON) | ||
| (INCLUDES BEARINGS) | ||||
| 458-7918 AB | KIT-BEARING (0.25-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 458-7939 AB | KIT-BEARING (0.50-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 458-7940 AB | KIT-BEARING (0.75-MM US) | |||
| (INCLUDES CONNECTING ROD BEARINGS) | ||||
| 276-7476 C | [1] | KIT-PISTON RING (STANDARD) | ||
| (INCLUDES RINGS) | ||||
| 380-2065 AB | KIT-PISTON RING (0.5-MM OS) | |||
| (INCLUDES RINGS) | ||||
| 466-4849 AB | KIT-PISTON RING (1-MM OS) | |||
| (INCLUDES RINGS) | ||||
| 389-5891 N | [1] | KIT-PISTON (STANDARD) | ||
| (INCLUDES RETAINING RING, PISTON RINGS, PISTON, & PIN) | ||||
| 380-4849 ABN | KIT-PISTON (0.5-MM OS) | |||
| (INCLUDES RETAINING RINGS, PISTON RINGS, PISTON, & PIN) | ||||
| 380-5078 ABN | KIT-PISTON (1-MM OS) | |||
| (INCLUDES RETAINING RINGS, PISTON RINGS, PISTON, & PIN) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
#SEBP74860041
346-1841: PLUG GP-CYLINDER HEAD
346-1841 PLUG GP-CYLINDER HEAD
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 1
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 1
For full view, you need register
#SEBP74860042
346-1841: PLUG GP-CYLINDER HEAD
346-1841 PLUG GP-CYLINDER HEAD
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 2
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 2
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 470-4925 C | [1] | PLUG | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP74860043
417-7187: PULLEY GP-CRANKSHAFT
For full view, you need register
#SEBP74860044
324-4551: PULLEY GP-ENGINE
For full view, you need register
#SEBP74860045
391-3197: ROCKER ARM GP
For full view, you need register
Parts for your 320D2 EXCAVATOR:
#SEBP74860046
438-3180: ROCKER ARM GP
For full view, you need register
#SEBP74860047
335-5602: VALVE MECHANISM GP
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 335-5604 | [1] | SHAFT AS-ROCKER ARM | |
| 276-9200 | [2] | PLUG-SHAFT END | ||
| [1] | SHAFT-ROCKER ARM | |||
| 2. | 225-5961 | [2] | WASHER (26.7X34.32X0.38-MM THK) | |
| 3. | 8T-9535 M | [1] | BOLT-SOCKET HEAD (M8X1.25X60-MM) | |
| 4. | 225-5962 | [5] | BOLT (M8X1.25X30-MM) | |
| 5. | 225-5959 | [2] | CLIP | |
| 6. | 225-5638 | [5] | SPRING | |
| 7. | 225-5625 | [6] | LEVER AS | |
| (EACH INCLUDES) | ||||
| 5B-9079 | [1] | NUT-JAM (3/8-24-THD) | ||
| 185-1546 | [1] | SCREW | ||
| 8. | 225-5640 | [6] | LEVER AS | |
| (EACH INCLUDES) | ||||
| 5B-9079 | [1] | NUT-JAM (3/8-24-THD) | ||
| 185-1546 | [1] | SCREW | ||
| M | METRIC PART | |||
#SEBP74860048
417-5871: FILLER GP-ENGINE OIL
For full view, you need register
#SEBP74860049
368-7675: FILTER & MTG GP-ENGINE OIL
368-7675 FILTER & MTG GP-ENGINE OIL
S/N NBF1-UP; SDZ1-UP
PART OF 455-4086 INSTALLATION AR-ENGINE
S/N NBF1-UP; SDZ1-UP
PART OF 455-4086 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 322-3154 Y | [1] | FILTER GP-ENGINE OIL | |
| 2. | 329-5534 | [1] | CONNECTOR AS | |
| 8C-5723 | [1] | CONNECTOR | ||
| 228-7093 | [1] | SEAL-O-RING | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| 3. | 346-3229 | [1] | BASE AS-FILTER | |
| 232-7599 | [1] | PLUG | ||
| 4. | 480-9457 I | [1] | HOSE AS | |
| 5. | 480-9458 I | [1] | HOSE AS | |
| 6. | 379-4465 | [1] | PLATE AS | |
| 7. | 477-9886 | [1] | CLIP | |
| 8. | 309-5130 | [1] | PLUG AS | |
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 9. | 309-5137 | [1] | CONNECTOR AS | |
| 6V-8635 | [1] | CONNECTOR | ||
| 228-7093 | [1] | SEAL-O-RING | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| 10. | 319-6212 | [1] | CONNECTOR AS | |
| 6V-8714 | [1] | CONNECTOR | ||
| 228-7093 | [1] | SEAL-O-RING | ||
| 238-5082 | [1] | SEAL-O-RING | ||
| 11. | 319-6220 | [1] | ELBOW AS | |
| 6V-9008 | [1] | ELBOW | ||
| 228-7093 | [1] | SEAL-O-RING | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| 12. | 321-8649 | [1] | VALVE AS-FLUID SAMPLING (ENGINE OIL) | |
| 8C-3446 | [1] | VALVE-SAMPLING (ENGINE OIL) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 13. | 326-0319 | [1] | PLUG AS | |
| 9S-4188 | [1] | PLUG | ||
| 238-5083 | [1] | SEAL-O-RING | ||
| 14. | 8C-3445 | [1] | CAP-DUST | |
| 15. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 16. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 19. | 7Y-5074 E | GUARD-HOSE (49-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
PISTON & ROD GP
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings - Install - Connecting Rods in Position
C7.1 (Mech) Engines for Caterpillar Built Machines
C7.1 (Mech) Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove - Connecting Rods in Position
C7.1 (Mech) Engines for Caterpillar Built Machines
C7.1 (Mech) Engines for Caterpillar Built Machines
