FUEL SYSTEM
PUMP GP-FUEL INJECTIONPUMP GP-FUEL TRANSFER
TANK GP-FUEL
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
FUEL SYSTEM
PUMP GP-FUEL INJECTION
#SEBP74950080
420-8857: PUMP GP-FUEL INJECTION
420-8857 PUMP GP-FUEL INJECTION
PART OF 380-1780 ENGINE AR-PRIMARY
AN ATTACHMENT
PART OF 380-1780 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 908K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 387-9781 | [3] | STUD | |
| 2. | 387-9864 | [1] | TUBE AS | |
| 3. | 387-9865 | [1] | EYEBOLT | |
| 4. | 387-9866 | [1] | GASKET | |
| 5. | 393-7580 | [1] | BOLT | |
| 6. | 387-9868 | [1] | GASKET | |
| 7. | 421-1878 Y | [1] | PUMP GP-FUEL INJECTION | |
| 8. | 387-9880 | [1] | GEAR-PUMP | |
| 9. | 387-9881 | [1] | NUT | |
| 10. | 383-0199 | [5] | NUT-FLANGE | |
| 11. | 387-9882 | [1] | BRACKET | |
| 12. | 397-9947 | [1] | BRACKET | |
| 13. | 393-7572 | [4] | BOLT | |
| 14. | 396-0907 Y | [1] | GOVERNOR GP | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP74950081
421-1878: PUMP GP-FUEL INJECTION
421-1878 PUMP GP-FUEL INJECTION
PART OF 420-8857 PUMP GP-FUEL INJECTION
AN ATTACHMENT
PART OF 420-8857 PUMP GP-FUEL INJECTION
AN ATTACHMENT
For full view, you need register
Parts for your 908K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 388-7510 | [1] | HOUSING GP-FUEL PUMP | |
| 1A. | 383-0219 | [2] | PIN | |
| 1B. | 383-0279 | [2] | STUD | |
| 1C. | 393-2917 | [2] | STUD | |
| 1D. | [2] | STUD | ||
| 1E. | [2] | PIN | ||
| 2. | 387-9878 | [1] | PUMP AS-FUEL INJECTION | |
| 2A. | 393-2921 | [1] | BOLT | |
| 2B. | 393-2922 | [2] | GASKET | |
| 3. | 388-7522 | [1] | SCREW | |
| 4. | 383-0256 | [1] | GASKET | |
| 5. | 393-7574 | [4] | BOLT-FLANGE HEAD | |
| 6. | 383-0199 | [2] | NUT-FLANGE | |
| 7. | 383-0252 | [1] | JOINT | |
| 8. | 383-0507 | [1] | SHIM (0.35-MM THK) | |
| 9. | 393-2920 | [1] | COVER | |
| 10. | 388-7524 | [1] | GASKET | |
| 11. | 383-0198 | [2] | NUT-FLANGE | |
| 12. | 388-7511 | [1] | CAMSHAFT AS | |
| 13. | 388-7512 | [1] | COLLAR | |
| 14. | 388-7513 | [1] | BEARING | |
| 15. | 388-7514 | [1] | BEARING | |
| 16. | 388-7515 | [1] | STOPPER | |
| 17. | 388-7516 | [6] | SCREW | |
| 18. | 388-7517 | [1] | KEY (FUEL INJECTION PUMP) | |
| 19. | 388-7518 | [1] | STOPPER | |
| 20. | 393-7570 | [6] | BOLT-FLANGE HEAD | |
| 21. | 387-9879 | [1] | GASKET | |
#SEBP74950082
473-9374: PUMP GP-FUEL TRANSFER
473-9374 PUMP GP-FUEL TRANSFER
PART OF 437-9047, 512-8185 LINES GP-FUEL FILTER
PART OF 437-9047, 512-8185 LINES GP-FUEL FILTER
For full view, you need register
#SEBP74950083
560-4925: PUMP GP-FUEL TRANSFER
560-4925 PUMP GP-FUEL TRANSFER
S/N L88356-UP
PART OF 512-8185 LINES GP-FUEL FILTER
S/N L88356-UP
PART OF 512-8185 LINES GP-FUEL FILTER
For full view, you need register
#SEBP74950084
437-9173: TANK GP-FUEL
For full view, you need register
Parts for your 908K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 242-5762 | [1] | SENDER AS-FUEL LEVEL | |
| 2. | 242-5763 | [2] | STRAP AS-TANK | |
| 3. | 280-9764 | [1] | COVER | |
| 4. | 282-2270 | [1] | STRAINER-FUEL (TANK) | |
| 5. | 282-7720 | [1] | HOSE | |
| 6. | 284-9039 | [1] | CAP-FUEL (VENTED) | |
| 7. | 285-5676 | [1] | TUBE AS | |
| 8. | 298-7736 | [1] | COLLAR | |
| 9. | 304-2994 | [1] | PLATE | |
| 10. | 346-9043 | [2] | CLAMP-BAND | |
| 11. | 437-9172 | [1] | TANK AS-FUEL | |
| 12. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 14. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 18. | 8T-4189 M | [5] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP74950085
437-9173: TANK GP-FUEL
For full view, you need register
Parts for your 908K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 242-5762 | [1] | SENDER AS-FUEL LEVEL | |
| 2. | 242-5763 | [2] | STRAP AS-TANK | |
| 3. | 280-9764 | [1] | COVER | |
| 4. | 282-2270 | [1] | STRAINER-FUEL (TANK) | |
| 5. | 282-7720 | [1] | HOSE | |
| 6. | 284-9039 | [1] | CAP-FUEL (VENTED) | |
| 7. | 285-5676 | [1] | TUBE AS | |
| 8. | 298-7736 | [1] | COLLAR | |
| 9. | 304-2994 | [1] | PLATE | |
| 10. | 346-9043 | [2] | CLAMP-BAND | |
| 11. | 500-2457 C | [1] | TANK AS-FUEL | |
| 12. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 14. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 18. | 8T-4189 CM | [6] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4224 C | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP74950086
437-9173: TANK GP-FUEL
For full view, you need register
Parts for your 908K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 242-5762 | [1] | SENDER AS-FUEL LEVEL | |
| 2. | 242-5763 | [2] | STRAP AS-TANK | |
| 3. | 280-9764 | [1] | COVER | |
| 4. | 282-2270 | [1] | STRAINER-FUEL (TANK) | |
| 5. | 282-7720 | [1] | HOSE | |
| 6. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 507-1438 C | [1] | TUBE AS | |
| 284-9039 | [1] | CAP-FUEL (VENTED) | ||
| 491-7861 | [1] | TUBE AS | ||
| 8. | 298-7736 | [1] | COLLAR | |
| 9. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 10. | 346-9043 | [2] | CLAMP-BAND | |
| 11. | 500-2457 | [1] | TANK AS-FUEL | |
| 12. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 14. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP74950087
437-9173: TANK GP-FUEL
For full view, you need register
Parts for your 908K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 242-5762 | [1] | SENDER AS-FUEL LEVEL | |
| 2. | 242-5763 | [2] | STRAP AS-TANK | |
| 3. | 280-9764 | [1] | COVER | |
| 4. | 282-2270 | [1] | STRAINER-FUEL (TANK) | |
| 5. | 282-7720 | [1] | HOSE | |
| 6. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 507-1438 | [1] | TUBE AS | |
| 8. | 298-7736 | [1] | COLLAR | |
| 9. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 10. | 346-9043 | [2] | CLAMP-BAND | |
| 11. | 539-9248 C | [1] | TANK AS-FUEL | |
| 12. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 14. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP74950088
396-0901: ALTERNATOR GP-CHARGING
396-0901 ALTERNATOR GP-CHARGING
12-VOLT, 80-AMPERE
PART OF 380-1772, 380-1774, 380-1780, 416-6080 ENGINE AR-PRIMARY
AN ATTACHMENT
12-VOLT, 80-AMPERE
PART OF 380-1772, 380-1774, 380-1780, 416-6080 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 908K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 397-9953 | [1] | ALTERNATOR AS (12-VOLT, 80-AMPERE) | |
| 2. | 397-9954 | [1] | BRACKET | |
| 3. | 397-9955 | [1] | SUPPORT | |
| 4. | 393-7574 | [1] | BOLT-FLANGE HEAD | |
| 5. | 389-5248 | [1] | WASHER | |
| 6. | 387-9897 | [1] | BOLT-FLANGE HEAD | |
| 7. | 387-9820 | [2] | BOLT-FLANGE HEAD | |
| 8. | 473-5098 | [1] | BOLT | |
| 9. | 397-9957 | [1] | WASHER | |
| 10. | 397-9958 | [1] | WASHER (10.2X18.4X2.5-MM THK) | |
| 11. | 397-9959 | [1] | NUT |
#SEBP74950089
437-9017: BATTERY & WIRING GP
437-9017 BATTERY & WIRING GP
PART OF 437-9016 CHASSIS AR
PART OF 437-9016 CHASSIS AR
For full view, you need register
Parts for your 908K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8320 | [1] | PLATE-INSTRUCTION (BATTERY) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 8W-8528 | [5] | SLEEVE | |
| 4. | 230-6368 | [1] | BATTERY (12-VOLT, MAINTENANCE FREE, WET) | |
| 5. | 262-4257 | [1] | CABLE AS-GROUND | |
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(65-CM) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 8S-3020 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8Y-8081 E | TUBE-CONVOLUTED (65-CM) | |||
| 6. | 268-7955 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(30-CM) | |||
| 8S-3020 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(3-CM) | |||
| 7. | 270-5143 | [1] | TIE-PUSH MOUNT | |
| 8. | 437-9162 | [1] | PLATE AS | |
| 8C-8778 M | [2] | STUD-WELD (M8X1.25X25-MM) | ||
| 9. | 438-9480 | [1] | CABLE AS | |
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 10. | 438-9481 | [1] | CABLE AS | |
| 159-8049 E | CABLE (00-GA, RED)(144-CM) | |||
| 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8U-0767 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 030-1705 | [2] | TERMINAL-CABLE (00-GA, 5/16-IN SCREW) | ||
| 141-2316 | [1] | COVER | ||
| 11. | 438-9484 | [1] | CABLE AS | |
| 6T-5598 | [1] | TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 224-1297 | [1] | TERMINAL-RING | ||
| 12. | 132-5789 | [1] | CLIP (LADDER) | |
| 13. | 344-5674 M | [2] | NUT (M8X1.25-THD) | |
| 14. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 15. | 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 5P-9960 | [1] | BOLT (1/4-20X0.75-IN) | |
| 18. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 19. | 7P-1695 | [1] | WASHER (10.5X19X3-MM THK) | |
| 20. | 8F-3590 | [1] | LOCKWASHER | |
| 21. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
PUMP GP-FUEL INJECTION
Operation and Maintenance Manual
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse And Salvage Guidelines
Testing and Adjusting
Fuel Injection Timing - Check
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Pump and Governor - Remove - C3.3B
C2.6 and C3.3B Engines for Caterpillar Built Machines
C2.6 and C3.3B Engines for Caterpillar Built Machines
Fuel Injection Pump and Governor - Install - C3.3B
C2.6 and C3.3B Engines for Caterpillar Built Machines
C2.6 and C3.3B Engines for Caterpillar Built Machines
Fuel Injection Pump and Governor - Disassemble
C2.6 and C3.3B Engines for Caterpillar Built Machines
C2.6 and C3.3B Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Remove and Install - C3.3B and C2.6
C2.6 and C3.3B Engines for Caterpillar Built Machines
C2.6 and C3.3B Engines for Caterpillar Built Machines
Service Magazine
