AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-3462 CARRIER GP-SEAL S/N TX71-UP; KHX16810-UP 140G MOTOR GRADER


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP

MOTOR GRADER 140G MOTOR GRADER 5MD
 C7 Engine Emissions Retrofit Repower Tier III For 140G Motor Grader 5MD00001-UP (MACHINE) SEBP7519 140G 5MD   (1987)

BASIC ENGINE

CRANKSHAFT GP
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CRANKSHAFT GP
210-5590 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
115-4210 SEAL GP-CRANKSHAFT
 

#SEBP75190010
 

4W-3462: CARRIER GP-SEAL

4W-3462 CARRIER GP-SEAL
S/N TX71-UP; KHX16810-UP
i00125200 SEBP7519
4W3462 CARRIER GP-SEAL Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6546 [1] COVER  
2. 247-1876 [1] SEAL  
3. 239-0583 [1] GASKET  
4. 6V-3538 [2] DOWEL  
5. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
6. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
   
  4C-9612 BF SEALANT-SILICONE  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP75190011
 

222-5947: COVER GP-CYLINDER BLOCK

222-5947 COVER GP-CYLINDER BLOCK
S/N TX71-UP; KHX16810-UP
i02815235 SEBP7519
2225947 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6544 [1] COVER  
2. 4P-5918 [3] CLIP  
3. 4Y-9652 [3] GASKET  
4. 342-4977 C [2] COVER-SIDE  
5. 7W-3872 [6] SLEEVE  
6. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
7. 110-7618 M [3] BOLT AS  
9. 222-5893 [1] COVER AS  
  6V-5698 M [2] SCREW-BUTTON HEAD (M4X0.7X10-MM)  
10. 210-3321 [1] STUD (M8X1.25-THD)  
11. 5C-7261 M [1] NUT (M8X1.25-THD)  
12. 6V-2317 M [23] BOLT (M8X1.25X30-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9M-1974 C [22] WASHER-HARD (8.8X16X2-MM THK)  
15. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP75190012
 

275-0595: COVER GP-FRONT HOUSING

275-0595 COVER GP-FRONT HOUSING
S/N TX71-UP; KHX16810-UP
i02791451 SEBP7519
2750595 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
2. 301-7789 [1] CLIP (SLOT)  
3. 108-3612 [1] SPACER (11.13X19.05X53-MM THK)  
4. 362-9558 [1] TUBE AS-OIL FILLER  
5. 166-1776 [1] COVER AS-FRONT  
  126-1757 [2] WASHER (10.85X19.3X1.27-MM THK)  
  136-0822 [2] STUD  
6. 166-1781 [1] GASKET  
7. 241-5645 [1] CAP AS-ENGINE OIL FILLER  
8. 061-9455 [1] SEAL-O-RING  
9. 344-5674 M [2] NUT (M8X1.25-THD)  
10. 6V-2317 M [11] BOLT (M8X1.25X30-MM)  
11. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
12. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
13. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 301-7790 [1] CLIP (TAB)  
  M   METRIC PART
 

#SEBP75190013
 

261-3721: COVER GP-VALVE MECHANISM

261-3721 COVER GP-VALVE MECHANISM
S/N TX71-UP; KHX16810-UP
i02555433 SEBP7519
2613721 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 288-9175 C [1] COVER GP-VALVE MECHANISM  
  272-0388 [1] SEAL-VALVE COVER (VALVE MECHANISM BASE)  
2. 273-2838 C [13] SLEEVE-SPACER  
3. 271-2417 [1] COVER GP-VALVE MECHANISM (BASE)  
3A. 244-4486 [1] SEAL-COVER (VALVE COVER BASE)  
4. 099-3649 M [13] BOLT (M8X1.25X40-MM)  
5. 8T-4224 [13] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP75190014
 

210-5590: CRANKSHAFT GP

210-5590 CRANKSHAFT GP
S/N TX71-UP; KHX16810-UP
PART OF 455-4574 ENGINE AR-CORE
i02215729 SEBP7519
2105590 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-5658 [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 J [1] BEARING-THRUST (STANDARD)  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 J [6] BEARING-MAIN (STANDARD)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
   
  7C-7980 ABF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE IS USED ONLY TO SALVAGE (REPAIR) THE REAR SEAL SURFACE OF THE CRANKSHAFT)
   
    AVAILABLE REPAIR KIT(S):
  196-9519 AJ BEARING GP-MAIN  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PARTS MARKED J
 

#SEBP75190015
 

221-4482: CYLINDER BLOCK GP

221-4482 CYLINDER BLOCK GP
S/N TX71-UP; KHX16810-UP
PART OF 455-4574 ENGINE AR-CORE
i02215754 SEBP7519
2214482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-8141 CY [1] CYLINDER BLOCK GP  
2. 7N-5683 [2] DOWEL  
3. 1W-8407 [2] SLEEVE  
4. 6V-3538 [2] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP75190016
 

263-3774: CYLINDER BLOCK GP

263-3774 CYLINDER BLOCK GP
S/N TX71-UP; KHX16810-UP
PART OF 305-8141 CYLINDER BLOCK GP
i02696326 SEBP7519
2633774 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
2. 9X-8916 M [14] BOLT (M16X2X140-MM)  
3. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
  M   METRIC PART
 

#SEBP75190017
 

305-8141: CYLINDER BLOCK GP

305-8141 CYLINDER BLOCK GP
S/N TX71-UP; KHX16810-UP
PART OF 221-4482 CYLINDER BLOCK GP
i02690909 SEBP7519
3058141 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-3774 Y [1] CYLINDER BLOCK GP  
2. 2M-6471 [2] PLUG-CUP  
3. 3H-5552 [1] PLUG-CUP  
4. 309-5131 [1] PLUG AS  
  9S-8006 [1] PLUG  
  238-5081 [1] SEAL-O-RING  
5. 2W-7213 [6] BUSHING (CAMSHAFT)  
6. 216-5586 [1] BUSHING (CAMSHAFT)  
   
  107-7604 ABF SLEEVE-CYLINDER  
    (FOR SALVAGE OF CYLINDER BORE IN BLOCK.
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP75190018
 

219-5844: CYLINDER HEAD AS

219-5844 CYLINDER HEAD AS
S/N TX71-UP; KHX16810-UP
PART OF 219-5846 CYLINDER HEAD GP
i02215799 SEBP7519
2195844 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 8M-5860 [12] PLUG-CUP  
3. 4F-5695 [2] PLUG-CUP  
4. 227-1200 [6] SLEEVE-INJECTOR  
5. 217-5213 [12] INSERT-VALVE SEAT (INLET)  
6. 147-8218 [6] INSERT-VALVE SEAT (EXHAUST)  
7. 8C-0563 [12] SEAL-O-RING  
8. 9S-9334 [1] PLUG-O-RING  
9. 9X-7712 [1] SEAL-O-RING  
 

#SEBP75190019
 

219-5846: CYLINDER HEAD GP

219-5846 CYLINDER HEAD GP
S/N TX71-UP; KHX16810-UP
PART OF 219-5847 CYLINDER HEAD GP
i02215801 SEBP7519
2195846 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 219-5844 Y [1] CYLINDER HEAD AS  
2. 145-7390 [12] VALVE-INLET  
3. 147-8211 [6] VALVE-EXHAUST  
4. 1W-2715 [24] LOCK-RETAINER  
5. 7E-7779 [12] RETAINER-SPRING  
6. 147-8214 [12] SEAL-VALVE STEM  
7. 140-9670 [12] GUIDE-VALVE  
8. 137-6718 [6] SPRING-VALVE  
9. 140-6188 [12] SPRING-VALVE  
10. 2A-4429 [12] LOCK-RETAINER  
11. 134-4483 [6] RETAINER-SPRING  
12. 147-8220 [6] GUIDE-VALVE  
13. 163-2478 [6] SEAL-VALVE STEM  
14. 137-6715 [6] SEAT-VALVE SPRING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Connecting Rod Bearing Journal
3306C Engines for Caterpillar Built Machines
Main Bearing Journal
3306C Engines for Caterpillar Built Machines
Crankshaft Hub and Damper
3306C Engines for Caterpillar Built Machines
Crankshaft
3306C Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3306C Engines for Caterpillar Built Machines
Main Bearings - Inspect
3306C Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Hub
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Front Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Main Bearings
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Rear Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2004/09/27
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08

Caterpillar Parts SIS Catalog 140G :

CAMSHAFT GP
212-4289 CAMSHAFT GP
AIR COMPRESSOR GP
456-5602 AIR COMPRESSOR GP
AIR COMPRESSOR GP
224-0003 AIR COMPRESSOR GP
342-8644 INSTALLATION GP-ENGINE
455-4581 ENGINE AR-CORE
455-4574 ENGINE AR-CORE
330-9478 ENGINE AR-COMPLETE
342-8655 CONVERSION AR-MACHINE
COVER GP-CYLINDER BLOCK
222-5947 COVER GP-CYLINDER BLOCK
COVER GP-FRONT HOUSING
275-0595 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
261-3721 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
210-5590 CRANKSHAFT GP
CYLINDER BLOCK GP
221-4482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
263-3774 CYLINDER BLOCK GP
CYLINDER BLOCK GP
305-8141 CYLINDER BLOCK GP
CYLINDER HEAD AS
219-5844 CYLINDER HEAD AS

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.