AVSPARE.COM
parts catalog

387-3783 SCREEN GP-HYDRAULIC S/N NBN1-UP PART OF 461-0500 TANK GP-HYDRAULIC 336D2 GC EXCAVATOR




HYDRAULIC SYSTEM

FILTER GP
 

#SEBP75520340
 

387-3783: SCREEN GP-HYDRAULIC

387-3783 SCREEN GP-HYDRAULIC
S/N NBN1-UP
PART OF 461-0500 TANK GP-HYDRAULIC
i05262727 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-7784 [1] ROD  
2. 209-6000 [1] SCREEN AS (HYDRAULIC TANK)  
3. 259-0918 [1] GUIDE  
4. 095-6639 [1] SPRING  
5. 5H-5672 [1] SEAL-O-RING  
6. 8T-4133 M [2] NUT (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP75520341
 

234-4440: SWIVEL GP

234-4440 SWIVEL GP
S/N NBN1-UP
PART OF 239-1617 LINES GP-TRAVEL MOTOR
i02535171 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-7131 [1] RETAINER  
2. 7Y-4817 [1] COVER  
3. 159-7782 [5] SEAL  
4. 225-4548 [1] HOUSING  
5. 225-4549 [1] ROTOR  
6. 095-1625 [3] SEAL-O-RING  
7. 095-1716 [1] SEAL-O-RING  
8. 453-3454 [2] WASHER-HARD (11X21X2.5-MM THK)  
9. 455-3798 M [6] BOLT (M10X1.5X25-MM)  
10. 8T-6759 [1] PLUG-PIPE  
  M   METRIC PART
 

#SEBP75520342
 

434-5355: TANK & FILTER GP-HYDRAULIC

434-5355 TANK & FILTER GP-HYDRAULIC
S/N NBN1-UP
310-L (81.9-US GAL)
PART OF 434-5353 TANK & MTG GP-HYDRAULIC
i05418086 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-2680 [1] SEAL-O-RING  
2. 158-8987 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
3. 275-1362 [1] BRACKET  
4. 289-8194 Y [1] FILTER GP-OIL (HYDRAULIC, CASE DRAIN)  
5. 337-1277 [1] PLATE  
6. 461-0500 Y [1] TANK GP-HYDRAULIC  
7. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
8. 164-5590 [1] VALVE AS-FLUID SAMPLING (HYDRAULIC OIL)  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
9. 188-4140 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
10. 6V-0852 [1] CAP-DUST  
11. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
12. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
14. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
18. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
19. 8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75520343
 

434-5353: TANK & MTG GP-HYDRAULIC

434-5353 TANK & MTG GP-HYDRAULIC
S/N NBN1-UP
PART OF 434-5322 HYDRAULIC AR
i05418085 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 248-9845 Y [1] LINES GP-RETURN  
2. 434-5355 Y [1] TANK & FILTER GP-HYDRAULIC  
3. 085-9310 [6] SPACER (16.6X32X26-MM THK)  
4. 447-1707 M [6] BOLT (M16X2X60-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75520344
 

461-0500: TANK GP-HYDRAULIC

461-0500 TANK GP-HYDRAULIC
S/N NBN1-UP
310-L (81.9-US GAL)
PART OF 434-5355 TANK & FILTER GP-HYDRAULIC
i06259299 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2827 [1] GUIDE-VALVE  
2. 8J-8782 [1] BODY-DRAIN VALVE  
3. 8J-8783 [1] VALVE-DRAIN  
4. 9J-7031 [1] PLUG-DRAIN  
5. 119-5162 [1] COVER  
6. 165-3256 [1] PIPE AS  
7. 207-6403 [1] PLUG  
8. 227-0590 [1] BREATHER (HYDRAULIC TANK)  
9. 347-6081 Y [1] GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL)  
10. 387-3783 Y [1] SCREEN GP-HYDRAULIC (TANK)  
11. 395-0027 [1] COVER AS  
12. 432-6291 [1] SENSOR-TEMPERATURE (HYDRAULIC OIL)  
14. 095-1608 [1] SEAL-O-RING  
15. 095-1735 [1] SEAL-O-RING  
16. 207-6404 [1] WASHER (49.5X60.5X1.5-MM THK)  
17. 3K-0360 [1] SEAL-O-RING  
18. 4J-0527 [1] SEAL-O-RING  
19. 5C-9553 M [4] BOLT (M6X1X16-MM)  
20. 5M-2057 [1] SEAL-O-RING  
21. 6D-9157 [1] SEAL-O-RING  
22. 6V-6707 [1] SEAL-O-RING  
23. 7B-3039 [1] SPRING  
24. 8T-0267 M [2] BOLT-SOCKET HEAD (M6X1X12-MM)  
25. 8T-3298 [1] SEAL-RECTANGULAR  
26. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
28. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
29. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
30. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75520345
 

247-7500: VALVE AR-SWING

247-7500 VALVE AR-SWING -WITHOUT FINE SWING
S/N NBN1-UP
PART OF 456-1078 DISTRIBUTION AR
AN ATTACHMENT
i02536816 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  259-0680 Y [1] VALVE GP-SWING CUSHION  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75520346
 

352-6846: VALVE GP-CONTROL

352-6846 VALVE GP-CONTROL -BOOM, BUCKET, STICK, TRAVEL
S/N NBN1-UP
PART OF 285-1536 VALVE GP-MAIN CONTROL
i04539671 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-2274 [5] COVER  
2. 310-0404 Y [2] PLUG GP-CONTROL VALVE  
3. 6E-5731 [4] VALVE (LOAD CHECK)  
4. 7I-1248 [5] SPRING  
5. 7Y-8099 [2] COVER  
6. 147-4163 Y [1] VALVE GP-RELIEF (NEGATIVE FLOW CONTROL)  
7. 153-5286 [1] VALVE (LOAD CHECK)  
8. 153-5288 [1] SPRING  
9. 153-5289 [1] GUIDE  
10. 153-5290 [1] PLUG  
11. 153-5291 [1] CONNECTOR  
12. 153-5292 [1] VALVE-CHECK  
13. 153-5293 [1] SPRING  
14. 158-8159 [5] HOUSING  
15. 236-6419 [5] PLUG  
16. 236-6421 [1] PLUG  
17. 352-7122 CY [3] VALVE GP-RELIEF (PILOT OPERATED)  
18. 352-6853 Y [1] VALVE GP-CONTROL (WITHOUT COVERS, HOUSINGS)  
19. 095-1590 [5] SEAL-O-RING  
20. 095-1787 [5] RING-BACKUP  
21. 111-9959 [2] PLUG-PIPE  
22. 2M-9780 [1] SEAL-O-RING  
23. 4I-6397 [1] RING-BACKUP  
24. 4J-0520 [2] SEAL-O-RING  
25. 6V-3922 [1] SEAL-O-RING  
26. 6V-5597 [10] SEAL-O-RING  
27. 7M-8485 [1] SEAL-O-RING  
28. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [28] BOLT (M10X1.5X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75520347
 

352-6853: VALVE GP-CONTROL

352-6853 VALVE GP-CONTROL
S/N NBN1-UP
PART OF 352-6846 VALVE GP-CONTROL
i04064330 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-2271 [10] RETAINER  
2. 352-7057 [3] SPRING-RETURN  
3. 352-7058 [1] SPRING-RETURN  
4. 352-7059 [1] SPRING-RETURN  
5. 153-5276 M [5] BOLT-SPECIAL (M10X1.5X82-MM)  
6. 225-4820 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  225-4821 [1] PLUG  
   
    PARTS SHOWN IN GRAPHIC WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

#SEBP75520348
 

352-6856: VALVE GP-CONTROL

352-6856 VALVE GP-CONTROL -WITHOUT HOUSINGS
S/N NBN1-UP
PART OF 352-7142 VALVE GP-CONTROL
i04065850 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-2596 [1] SPRING  
2. 6E-2163 [1] VALVE-CHECK  
3. 6E-2271 [8] RETAINER  
4. 352-7057 [2] SPRING-RETURN  
5. 352-7058 [1] SPRING-RETURN  
6. 352-7059 [1] SPRING-RETURN  
7. 153-5276 M [4] BOLT-SPECIAL (M10X1.5X82-MM)  
8. 225-4820 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  225-4821 [1] PLUG  
9. 3K-0360 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP75520349
 

352-7142: VALVE GP-CONTROL

352-7142 VALVE GP-CONTROL -BOOM, STICK, SWING, TRAVEL
S/N NBN1-UP
PART OF 285-1536 VALVE GP-MAIN CONTROL
i04158035 SEBP7552
  For full view, you need register

Parts for your 336D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3148 [3] SPRING  
2. 6E-2274 [5] COVER  
3. 6E-5169 [1] SPRING  
4. 7I-1248 [1] SPRING  
5. 121-1491 Y [1] VALVE GP-SOLENOID (STRAIGHT TRAVEL)  
6. 153-5288 [1] SPRING  
7. 153-5289 [1] GUIDE  
8. 153-5290 [2] PLUG  
9. 153-5291 [1] CONNECTOR  
10. 153-5292 [1] VALVE-CHECK  
11. 153-5293 [1] SPRING  
12. 323-7898 Y [1] VALVE GP-PRIORITY (SWING)(BOOM 2)  
13. 153-5298 [1] SLEEVE  
14. 153-5299 [1] VALVE  
15. 153-5306 [1] SPRING  
16. 153-5309 [1] SLEEVE  
17. 153-5311 [1] SPRING  
18. 158-8150 [1] VALVE GP-UNLOADING (STICK CYLINDER)  
19. 158-8159 [4] HOUSING  
20. 158-8206 [1] HOUSING  
21. 158-8207 [1] STOPPER  
22. 323-7897 [1] COVER  
23. 201-9263 [2] PLUG  
24. 225-4818 [3] PLUG AS  
    (EACH INCLUDES)
  4J-7533 [1] SEAL-O-RING  
  225-4804 [1] PLUG  
25. 236-6419 [1] PLUG  
26. 236-6421 [1] PLUG  
27. 264-9961 [1] PLUG  
28. 352-6856 Y [1] VALVE GP-CONTROL (WITHOUT HOUSINGS)  
29. 250-2446 [1] PLUG  
30. 250-2447 [1] PLUG  
31. 352-7116 Y [1] VALVE GP-RELIEF (PILOT OPERATED)(STRAIGHT TRAVEL)  
32. 352-7122 Y [1] VALVE GP-RELIEF (PILOT OPERATED)(STICK)  
33. 095-1575 [1] SEAL-O-RING  
34. 095-1590 [3] SEAL-O-RING  
35. 095-1603 [1] SEAL-O-RING  
36. 095-1778 [1] RING-BACKUP  
37. 095-1787 [3] RING-BACKUP  
38. 255-5594 [1] SEAL-O-RING  
39. 103-8177 [1] ADAPTER  
40. 123-2485 [1] PLUG  
41. 2M-9780 [1] SEAL-O-RING  
42. 3J-1907 [1] SEAL-O-RING  
43. 4I-3569 [1] RING-BACKUP  
44. 4I-6397 [3] RING-BACKUP  
45. 4J-5309 [1] SEAL-O-RING  
46. 4T-5074 [1] RING-BACKUP  
47. 6E-3653 [1] PLUG  
48. 6E-5643 [1] VALVE (LOAD CHECK)(BOOM)  
48A. 6E-5643 [2] VALVE (LOAD CHECK)(STRAIGHT TRAVEL)  
49. 6E-5731 [1] VALVE (LOAD CHECK)(SWING)  
50. 6V-3922 [3] SEAL-O-RING  
51. 6V-5393 [1] SEAL-O-RING  
52. 6V-5556 [1] SEAL-O-RING  
53. 6V-5597 [9] SEAL-O-RING  
54. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
55. 7M-8485 [2] SEAL-O-RING  
56. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
57. 7Y-5219 [1] SEAL-O-RING  
58. 8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
59. 8T-4195 M [20] BOLT (M10X1.5X30-MM)  
60. 8T-6685 M [4] BOLT (M10X1.5X110-MM)  
61. 8T-6759 [2] PLUG-PIPE  
62. 111-9959 [1] PLUG-PIPE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Oil Filter - Inspect
336D2 and 340D2 Excavators
Special Instruction
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Oil Filter (Return)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Oil Filter (Case Drain)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Oil Filter (Return)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Hydraulic Tank and Mounting
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Systems Operation
Hydraulic Filter (Pilot)
336D2 and 340D2 Excavators Hydraulic System
Hydraulic Tank and Filter
336D2 and 340D2 Excavators Hydraulic System
Oil Filter (Return) - Case Drain Filter
336D2 and 340D2 Excavators Hydraulic System
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Oil Filter (Hydraulic, Return) - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Oil Filter (Hydraulic, Return) - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}

Caterpillar Parts SIS Catalog 336D2 GC :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.