336F L & 336F LN Excavators KFT00001-UP (MACHINE) POWERED BY C9.3 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

EXCAVATOR 336F LN EXCAVATOR KFT
336F L & 336F LN Excavators KFT00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP7553 336F LN KFT (2012)

Parts group 336F LN:

For full view, you need register

ELECTRICAL AND STARTING SYSTEM

ALARM GP

360-6166 ALARM GP-TRAVEL

360-6166 ALARM GP-TRAVEL -BACKUP
S/N KFT1-UP; WTZ1-UP
AN ATTACHMENT

ALTERNATOR GP-CHARGING

344-0368 MOUNTING GP-ALTERNATOR & COMPR

344-0368 MOUNTING GP-ALTERNATOR & COMPR
S/N SSE1-UP; SYE1-UP
PROVIDES ALTERNATOR AND AIR CONDITIONING COMPRESSOR MOUNTING GP LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE, INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATORS AND COMPRESSORS
CANNOT BE USED WITH HINGE MOUNTED ALTERNATORS AND COMPRESSORS

385-1339 PULLEY GP-FAN

385-1339 PULLEY GP-FAN
S/N KFT1-UP; WTZ1-UP
PART OF 383-6402 FAN AR-VARIABLE
AN ATTACHMENT

235-7133 ALTERNATOR GP-CHARGING

235-7133 ALTERNATOR GP-CHARGING
S/N SSE1-UP; SYE1-UP
24-VOLT, 80-AMPERE
PART OF 345-1176 ALTERNATOR GP-CHARGING

345-1176 ALTERNATOR GP-CHARGING

345-1176 ALTERNATOR GP-CHARGING
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE

BATTERY GP

319-1193 BATTERY & WIRING GP

319-1193 BATTERY & WIRING GP -COLD WEATHER
S/N KFT1-UP; WTZ1-UP
WITHOUT JUMP START
PART OF 366-6221, 448-8855 OPTION AR-COLD WEATHER
AN ATTACHMENT

377-8172 BATTERY & WIRING GP

377-8172 BATTERY & WIRING GP
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR
Type 1

377-8172 BATTERY & WIRING GP

377-8172 BATTERY & WIRING GP
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR
Type 2

377-8173 ELECTRICAL AR

377-8173 ELECTRICAL AR
S/N KFT1-UP; WTZ1-UP
PART OF 384-2176, 384-2177 COMMON AR

CIRCUIT BREAKER GP

431-4742 PANEL GP-FUSE

431-4742 PANEL GP-FUSE
S/N KFT1-UP; WTZ1-UP
PART OF 377-8176 WIRING GP-CAB
ALSO AN ATTACHMENT

CONTROL GP

316-8840 INSTALLATION AR

316-8840 INSTALLATION AR -WIPER, WASHER
S/N KFT1-UP; WTZ1-UP
PART OF 463-6292, 463-6293, 464-7101, 464-7102 DISTRIBUTION AR, 360-7177 OPTION AR-CAB
FOR USE WITH 70/30 SPLIT FRONT WINDOW
AN ATTACHMENT

342-3641 INSTALLATION AR

342-3641 INSTALLATION AR -WIPER, WASHER
S/N KFT1-UP; WTZ1-UP
PART OF 463-6291, 464-7100 DISTRIBUTION AR, 360-7178 OPTION AR-CAB
FOR USE WITH 1-PIECE FRONT WINDOW
AN ATTACHMENT

377-8174 CONTROL & MONITOR GP-CAB

377-8174 CONTROL & MONITOR GP-CAB
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR

CONTROL GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N KFT1-UP; WTZ1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

392-0196 CONTROL & MTG GP-ELECTRONIC

392-0196 CONTROL & MTG GP-ELECTRONIC
S/N SYE1-1020
PART OF 373-3834 ENGINE AR-COMPLETE
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH AIR COOLED ECM

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N KFT1-UP; WTZ1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

396-6500 CONTROL GP-ELECTRONIC

396-6500 CONTROL GP-ELECTRONIC
S/N KFT1-UP; WTZ1-UP
24-VOLT, VOLTAGE LIMITING PROTECTION MODULE
PART OF 389-2633 ELECTRICAL GP-DEF

346-8033 MOUNTING GP-CONTROL

346-8033 MOUNTING GP-CONTROL -WIPER, WASHER
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 316-8840, 342-3641 INSTALLATION AR
AN ATTACHMENT

368-8308 MOUNTING GP-ELECTRONIC CONTROL

368-8308 MOUNTING GP-ELECTRONIC CONTROL -CEM
S/N KFT1-UP; WTZ1-UP
PART OF 368-8304 INSTALLATION AR-CEM

ELECTRONICS GP-ENGINE

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N KFT1-UP; WTZ1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

392-0196 CONTROL & MTG GP-ELECTRONIC

392-0196 CONTROL & MTG GP-ELECTRONIC
S/N SYE1-1020
PART OF 373-3834 ENGINE AR-COMPLETE
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH AIR COOLED ECM

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N KFT1-UP; WTZ1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

388-3539 CONTROL & MTG GP-ENGINE ELEK

388-3539 CONTROL & MTG GP-ENGINE ELEK
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH REMOTE MOUNTED A5E2 ECM
CANNOT BE USED WITH ENGINE MOUNTED A5E2 ECM

394-8802 CONTROL & MTG GP-ENGINE ELEK

394-8802 CONTROL & MTG GP-ENGINE ELEK
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE

374-0756 CONTROL GP-ENGINE ELECTRONIC

374-0756 CONTROL GP-ENGINE ELECTRONIC
S/N SYE1-UP
A4E4V3.1 LRC FLCLD
PART OF 392-0196 CONTROL & MTG GP-ELECTRONIC

ELECTRONICS GP-POWER TRAIN

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N KFT1-UP; WTZ1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

392-0196 CONTROL & MTG GP-ELECTRONIC

392-0196 CONTROL & MTG GP-ELECTRONIC
S/N SYE1-1020
PART OF 373-3834 ENGINE AR-COMPLETE
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH AIR COOLED ECM

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N KFT1-UP; WTZ1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

CONTROL GP-GRADE

390-0001 GRADE CONTROL AR

390-0001 GRADE CONTROL AR
S/N KFT1-UP; WTZ1-UP
AN ATTACHMENT

338-6843 MOUNTING GP-GRADE CONTROL

338-6843 MOUNTING GP-GRADE CONTROL
S/N KFT1-UP; WTZ1-UP
PART OF 390-0001 GRADE CONTROL AR
AN ATTACHMENT

349-2167 RECEIVER GP-LASER

349-2167 RECEIVER GP-LASER
S/N KFT1-UP; WTZ1-UP
PART OF 444-4150 STICK AR-HOE
AN ATTACHMENT

ELECTRONICS GP-IMPLEMENT

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N KFT1-UP; WTZ1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

392-0196 CONTROL & MTG GP-ELECTRONIC

392-0196 CONTROL & MTG GP-ELECTRONIC
S/N SYE1-1020
PART OF 373-3834 ENGINE AR-COMPLETE
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH AIR COOLED ECM

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N KFT1-UP; WTZ1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

ELECTRONICS GP-MACHINE

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N KFT1-UP; WTZ1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

392-0196 CONTROL & MTG GP-ELECTRONIC

392-0196 CONTROL & MTG GP-ELECTRONIC
S/N SYE1-1020
PART OF 373-3834 ENGINE AR-COMPLETE
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH AIR COOLED ECM

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N KFT1-UP; WTZ1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

309-5875 CONTROL & MTG GP-MACHINE

309-5875 CONTROL & MTG GP-MACHINE
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 377-8174 CONTROL & MONITOR GP-CAB
ALSO AN ATTACHMENT

310-5289 ELECTRONICS GP-MACHINE

310-5289 ELECTRONICS GP-MACHINE -MACHINE SECURITY SYSTEM
S/N KFT1-UP; WTZ1-UP
PART OF 309-5880 INSTALLATION GP-SECURITY
FIELD REPLACEMENT ORDER @@@@@486-0923@@@@@
AN ATTACHMENT

366-8797 ELECTRONICS GP-MACHINE

366-8797 ELECTRONICS GP-MACHINE
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR

486-0923 ELECTRONICS GP-MACHINE

486-0923 ELECTRONICS GP-MACHINE
S/N KFT1-UP; WTZ1-UP
PART OF 309-5880 INSTALLATION GP-SECURITY
FIELD REPLACEMENT FOR @@@@@310-5289@@@@@
AN ATTACHMENT

309-5880 INSTALLATION GP-SECURITY

309-5880 INSTALLATION GP-SECURITY
S/N KFT1-UP; WTZ1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT

309-5880 INSTALLATION GP-SECURITY

309-5880 INSTALLATION GP-SECURITY
S/N KFT1-UP; WTZ1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT

337-8363 INSTALLATION GP-SECURITY

337-8363 INSTALLATION GP-SECURITY
S/N KFT1-UP; WTZ1-UP
AN ATTACHMENT

CONTROL GP-UNPROGRAMMED

351-8490 CONTROL GP-UNPROGRAMMED

351-8490 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 522
S/N KFT1-UP; WTZ1-UP
PART OF 376-6478 CONTROL GP-COMMUNICATION
AN ATTACHMENT

ELECTRICAL GP

377-8173 ELECTRICAL AR

377-8173 ELECTRICAL AR
S/N KFT1-UP; WTZ1-UP
PART OF 384-2176, 384-2177 COMMON AR

IGNITION GP

343-3872 COIL GP-IGNITION

343-3872 COIL GP-IGNITION -AFTERTREATMENT REGEN DEVICE
S/N KFT1-UP; WTZ1-UP
PART OF 394-5352, 469-6266 MODULE AR-CLEAN EMISSIONS

LIGHTING GP

153-2521 LAMP GP-FLOOD

153-2521 LAMP GP-FLOOD
S/N KFT1-UP; WTZ1-UP
24-VOLT
PART OF 319-1175, 319-1176 LIGHTING GP-BOOM
AN ATTACHMENT

153-2522 LAMP GP-FLOOD

153-2522 LAMP GP-FLOOD
S/N KFT1-UP; WTZ1-UP
24-VOLT
FIELD REPLACEMENT FOR @@@@@153-2523@@@@@

153-2523 LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD
S/N KFT1-UP; WTZ1-UP
24-VOLT
PART OF 4I-5409 LIGHTING GP-FLOOD
FIELD REPLACEMENT ORDER @@@@@153-2522@@@@@

324-3740 LAMP GP-FLOOD

324-3740 LAMP GP-FLOOD -HID
S/N KFT1-UP; WTZ1-UP
SUSPENDED. 24-VOLT,35-WATT
PART OF 342-3177 LIGHTING GP-FLOOD
AN ATTACHMENT

325-4471 LAMP GP-FLOOD

325-4471 LAMP GP-FLOOD
S/N KFT1-UP; WTZ1-UP
24-VOLT
PART OF 319-1179 LIGHTING GP-FLOOD
AN ATTACHMENT

334-6198 LAMP GP-FLOOD

334-6198 LAMP GP-FLOOD -HID
S/N KFT1-UP; WTZ1-UP
24-VOLT, 35 WATT
PART OF 342-2965 LIGHTING GP-FLOOD
AN ATTACHMENT

339-3505 LAMP GP-FLOOD

339-3505 LAMP GP-FLOOD
S/N KFT1-UP; WTZ1-UP
24-VOLT
PART OF 484-7816, 484-8798 KIT-OVERHEAD GUARD, 319-1198 LIGHTING GP-FLOOD
AN ATTACHMENT

319-1175 LIGHTING GP-BOOM

319-1175 LIGHTING GP-BOOM -REACH
S/N KFT1-UP; WTZ1-UP
PART OF 344-0773, 344-0775, 344-0776 BOOM AR-1 PIECE LONG
AN ATTACHMENT

319-1176 LIGHTING GP-BOOM

319-1176 LIGHTING GP-BOOM -MASS
S/N KFT1-UP; WTZ1-UP
PART OF 344-0774 BOOM AR-1 PIECE SHORT
AN ATTACHMENT

319-1179 LIGHTING GP-FLOOD

319-1179 LIGHTING GP-FLOOD -CAB
S/N KFT1-UP; WTZ1-UP
PART OF 463-6291, 463-6292, 463-6293, 464-7100, 464-7101, 464-7102 DISTRIBUTION AR
AN ATTACHMENT

319-1198 LIGHTING GP-FLOOD

319-1198 LIGHTING GP-FLOOD -CAB
S/N KFT1-UP; WTZ1-UP
FRONT WINDOW GUARD
PART OF 360-7189, 360-7191, 445-2114 OPTION AR-LIGHTING
AN ATTACHMENT

342-2965 LIGHTING GP-FLOOD

342-2965 LIGHTING GP-FLOOD -CAB
S/N KFT1-UP; WTZ1-UP
CANNOT BE USED WITH FALLING OBJECT GUARD
AN ATTACHMENT

342-3177 LIGHTING GP-FLOOD

342-3177 LIGHTING GP-FLOOD -FRONT WINDOW GUARD, HID
S/N KFT1-UP; WTZ1-UP
PART OF 360-7188, 360-7190 OPTION AR-LIGHTING
AN ATTACHMENT

4I-5409 LIGHTING GP-FLOOD

4I-5409 LIGHTING GP-FLOOD -CHASSIS
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR

PANEL GP-CIRCUIT BREAKER

377-8175 PANEL & MTG GP-CIRCUIT BREAKER

377-8175 PANEL & MTG GP-CIRCUIT BREAKER
S/N KFT1-UP; WTZ1-UP
PART OF 377-8174 CONTROL & MONITOR GP-CAB

396-1789 PANEL GP-CIRCUIT BREAKER

396-1789 PANEL GP-CIRCUIT BREAKER
S/N KFT1-UP; WTZ1-UP
PART OF 377-8175 PANEL & MTG GP-CIRCUIT BREAKER

PANEL GP-FUSE

431-4742 PANEL GP-FUSE

431-4742 PANEL GP-FUSE
S/N KFT1-UP; WTZ1-UP
PART OF 377-8176 WIRING GP-CAB
ALSO AN ATTACHMENT

SENSOR GP

338-6839 SENSOR & MTG GP-POSITION

338-6839 SENSOR & MTG GP-POSITION -GRADE CONTROL, BOOM
S/N KFT1-UP; WTZ1-UP
PART OF 390-0001 GRADE CONTROL AR
AN ATTACHMENT

338-6841 SENSOR & MTG GP-POSITION

338-6841 SENSOR & MTG GP-POSITION -BODY TILT
S/N KFT1-UP; WTZ1-UP
PART OF 390-0001 GRADE CONTROL AR
AN ATTACHMENT

338-6847 SENSOR & MTG GP-POSITION

338-6847 SENSOR & MTG GP-POSITION -GRADE CONTROL, STICK
S/N KFT1-UP; WTZ1-UP
PART OF 344-0776 BOOM AR-1 PIECE LONG
Type 1
AN ATTACHMENT

338-6847 SENSOR & MTG GP-POSITION

338-6847 SENSOR & MTG GP-POSITION -GRADE CONTROL, STICK
S/N KFT1-UP; WTZ1-UP
PART OF 344-0776 BOOM AR-1 PIECE LONG
Type 2
AN ATTACHMENT

416-4729 SENSOR & MTG GP-PRESSURE

416-4729 SENSOR & MTG GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 394-5352, 469-6266 MODULE AR-CLEAN EMISSIONS

385-1334 SENSOR & MTG GP-SOOT

385-1334 SENSOR & MTG GP-SOOT
S/N KFT1-UP; WTZ1-UP
PART OF 368-8304 INSTALLATION AR-CEM

342-8959 SENSOR GP-ENGINE

342-8959 SENSOR GP-ENGINE
S/N SSE1-UP; SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
FOR USE WITH NRS MIXER ELBOW GP-AIR ORIENTED IN THE DOWNWARD POSITION
CANNOT BE USED WITH NRS MIXER ELBOW GP-AIR ORIENTED IN THE UPWARD POSITION

397-8790 SENSOR GP-ENGINE

397-8790 SENSOR GP-ENGINE
S/N SYE1-UP
PART OF 520-6566 ENGINE AR-CORE

423-6434 SENSOR GP-LIQUID LEVEL

423-6434 SENSOR GP-LIQUID LEVEL
S/N KFT263-UP; WTZ158-UP
PART OF 368-8305 LINES GP-FUEL

345-1948 SENSOR GP-POSITION

345-1948 SENSOR GP-POSITION
S/N KFT1-UP; WTZ1-UP
PART OF 338-6839, 338-6847 SENSOR & MTG GP-POSITION
AN ATTACHMENT

293-5340 SENSOR GP-PRESSURE

293-5340 SENSOR GP-PRESSURE
S/N SSE1-UP; SYE1-UP
PART OF 422-8408 RAIL GP-FUEL

293-5535 SENSOR GP-PRESSURE

293-5535 SENSOR GP-PRESSURE
S/N SSE1-UP; SYE1-UP
PART OF 342-8959 SENSOR GP-ENGINE

325-8634 SENSOR GP-PRESSURE

325-8634 SENSOR GP-PRESSURE
S/N SSE1-UP; SYE1-UP
PART OF 349-4570 BASE GP-FUEL FILTER

331-1134 SENSOR GP-PRESSURE

331-1134 SENSOR GP-PRESSURE
S/N SSE1-UP; SYE1-UP
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE

332-0296 SENSOR GP-PRESSURE

332-0296 SENSOR GP-PRESSURE
S/N SSE1-UP; SYE1-UP
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE

338-6970 SENSOR GP-PRESSURE

338-6970 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 317-4784, 383-9329, 383-9345, 385-3029 LINES GP-PILOT, 354-4378 SENSOR GP-PRESSURE
ALSO AN ATTACHMENT

338-6971 SENSOR GP-PRESSURE

338-6971 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 325-9194, 325-9195 LINES GP-BOOM CYLINDER, 381-2167 LINES GP-FRONT, 383-9329 LINES GP-PILOT, 319-9823 LINES GP-RETURN
ALSO AN ATTACHMENT

343-1771 SENSOR GP-PRESSURE

343-1771 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 398-3755 SENSOR GP-PRESSURE

344-1211 SENSOR GP-PRESSURE

344-1211 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 415-2405 MANIFOLD GP-INLET

354-4378 SENSOR GP-PRESSURE

354-4378 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 349-2307, 349-2309 CONTROL AR-AUXILIARY
AN ATTACHMENT

385-1173 SENSOR GP-PRESSURE

385-1173 SENSOR GP-PRESSURE
S/N SSE1-UP; SYE1-UP
NRS DIFFERENTIAL
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE

398-3755 SENSOR GP-PRESSURE

398-3755 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 416-4729 SENSOR & MTG GP-PRESSURE

236-6221 SENSOR GP-SPEED

236-6221 SENSOR GP-SPEED -ENGINE TIMING
S/N SSE1-UP; SYE1-UP
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE

234-5012 SENSOR GP-TEMPERATURE

234-5012 SENSOR GP-TEMPERATURE
S/N SSE1-UP; SYE1-UP
AMPSEAL CONNECTOR
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE

234-5013 SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
S/N SSE1-UP; SYE1-UP
PART OF 349-4570 BASE GP-FUEL FILTER, 342-8959, 397-8790 SENSOR GP-ENGINE

338-6849 GUARD GP-SENSOR

338-6849 GUARD GP-SENSOR
S/N KFT1-UP; WTZ1-UP
PART OF 344-0776 BOOM AR-1 PIECE LONG
AN ATTACHMENT

SOLENOID GP

337-7323 VALVE GP-EXHAUST GAS (NRS)

337-7323 VALVE GP-EXHAUST GAS (NRS)
S/N SSE1-UP; SYE1-UP
PART OF 347-9431 VALVE & MOUNTING GP (NRS)

STARTING AID GP

324-4376 STARTING AID GP-ETHER

324-4376 STARTING AID GP-ETHER
S/N KFT1-UP; WTZ1-UP
PART OF 448-8850, 454-5613 OPTION AR-REGIONAL
AN ATTACHMENT

239-1134 VALVE GP-ETHER STARTING

239-1134 VALVE GP-ETHER STARTING
S/N KFT1-UP; WTZ1-UP
24-VOLT
PART OF 324-4376 STARTING AID GP-ETHER
AN ATTACHMENT

STARTING MOTOR GP

3T-9525 PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
S/N SSE1-UP; SYE1-UP
PART OF 349-6536 STARTING MOTOR GP-ELECTRIC

349-6536 STARTING MOTOR GP-ELECTRIC

349-6536 STARTING MOTOR GP-ELECTRIC
S/N SSE1-UP; SYE1-UP
24-VOLT
PART OF 355-6044 STARTING MOTOR GP-ELECTRIC

355-6044 STARTING MOTOR GP-ELECTRIC

355-6044 STARTING MOTOR GP-ELECTRIC
S/N SSE1-UP; SYE1-UP
24-VOLT, 50-MT. LEFT HAND STARTER CONFIGURATION WITH A MAG SWITCH
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE

SWITCH GP

7N-0719 SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N KFT1-UP; WTZ1-UP
PART OF 377-8172 BATTERY & WIRING GP

383-5711 SWITCH GP-POSITION

383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N KFT286-UP; WTZ204-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT

383-5751 SWITCH GP-POSITION

383-5751 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N KFT1-UP; WTZ1-UP
INCLUDES LEVER
PART OF 316-8822 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT

238-1594 SWITCH GP-PUSH BUTTON

238-1594 SWITCH GP-PUSH BUTTON -REFUELING PUMP, START
PART OF 377-8302 PANEL GP-SWITCH
AN ATTACHMENT

238-1596 SWITCH GP-PUSH BUTTON

238-1596 SWITCH GP-PUSH BUTTON -REFUELING PUMP, STOP
PART OF 377-8302 PANEL GP-SWITCH
AN ATTACHMENT

350-8404 SWITCH GP-ROCKER

350-8404 SWITCH GP-ROCKER -BM FLOAT, OVERLOAD WARNING
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 390-0003, 390-0004 CONTROL AR-BOOM
AN ATTACHMENT

255-2752 SWITCH GP-START

255-2752 SWITCH GP-START
S/N KFT1-UP; WTZ1-UP
PART OF 328-0246 PANEL GP-SWITCH, 328-0391 SWITCH GP-START
AN ATTACHMENT

328-0391 SWITCH GP-START

328-0391 SWITCH GP-START
S/N KFT1-UP; WTZ1-UP
PART OF 319-0885 WIRING GP-COMMUNICATION
AN ATTACHMENT

336-5880 SWITCH GP-TOGGLE

336-5880 SWITCH GP-TOGGLE -QUICK COUPLER
S/N KFT1-UP; WTZ1-UP
PART OF 336-6007, 453-8721 WIRING GP-CAB
AN ATTACHMENT

335-0071 CONTROL GP-FOOT

335-0071 CONTROL GP-FOOT -FOOT SWITCH, ON/OFF, LH
S/N KFT1-UP; WTZ1-UP
PART OF 310-0440 CONTROL AR-AUXILIARY
AN ATTACHMENT

VALVE GP

337-7323 VALVE GP-EXHAUST GAS (NRS)

337-7323 VALVE GP-EXHAUST GAS (NRS)
S/N SSE1-UP; SYE1-UP
PART OF 347-9431 VALVE & MOUNTING GP (NRS)

WIRING GP

319-1193 BATTERY & WIRING GP

319-1193 BATTERY & WIRING GP -COLD WEATHER
S/N KFT1-UP; WTZ1-UP
WITHOUT JUMP START
PART OF 366-6221, 448-8855 OPTION AR-COLD WEATHER
AN ATTACHMENT

377-8172 BATTERY & WIRING GP

377-8172 BATTERY & WIRING GP
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR
Type 1

377-8172 BATTERY & WIRING GP

377-8172 BATTERY & WIRING GP
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR
Type 2

377-8173 ELECTRICAL AR

377-8173 ELECTRICAL AR
S/N KFT1-UP; WTZ1-UP
PART OF 384-2176, 384-2177 COMMON AR

389-2633 ELECTRICAL GP-DEF

389-2633 ELECTRICAL GP-DEF
S/N KFT1-UP; WTZ1-UP
24-VOLT
PART OF 370-5668, 499-6634 MODULE AR-DIESEL EXHAUST FLUID

316-8840 INSTALLATION AR

342-3641 INSTALLATION AR

342-3641 INSTALLATION AR -WIPER, WASHER
S/N KFT1-UP; WTZ1-UP
PART OF 463-6291, 464-7100 DISTRIBUTION AR, 360-7178 OPTION AR-CAB
FOR USE WITH 1-PIECE FRONT WINDOW
AN ATTACHMENT

367-7314 MOUNTING GP-CONNECTOR

367-7314 MOUNTING GP-CONNECTOR -ENGINE
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH T4F EXTERNAL HARNESS, FUEL COOLED ECMS, AIR COOLED ECM
CANNOT BE USED WITH T4I EXTERNAL HARNESS

350-8403 WIRING GP-BOOM FLOAT

350-8403 WIRING GP-BOOM FLOAT
S/N KFT1-UP; WTZ1-UP
PART OF 390-0002 CONTROL AR-BOOM
AN ATTACHMENT

324-5755 WIRING GP-CAB

324-5755 WIRING GP-CAB -REFUELING PUMP
PART OF 480-6106, 480-6108 CAB AR, 390-0013 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

328-0054 WIRING GP-CAB

328-0054 WIRING GP-CAB -ROOF
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 377-8174 CONTROL & MONITOR GP-CAB
ALSO AN ATTACHMENT

328-0103 WIRING GP-CAB

328-0103 WIRING GP-CAB -FRONT, RH
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 377-8174 CONTROL & MONITOR GP-CAB
ALSO AN ATTACHMENT

336-6007 WIRING GP-CAB

336-6007 WIRING GP-CAB -QUICK COUPLER
S/N KFT1-UP; WTZ1-UP
PART OF 350-8401 WIRING GP-CAB
AN ATTACHMENT

336-6360 WIRING GP-CAB

336-6360 WIRING GP-CAB
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 349-2307, 349-2309 CONTROL AR-AUXILIARY, 350-8403 WIRING GP-BOOM FLOAT
AN ATTACHMENT

350-8401 WIRING GP-CAB

350-8401 WIRING GP-CAB -QUICK COUPLER
S/N KFT1-UP; WTZ1-UP
PART OF 383-5016 CONTROL AR-COUPLER
AN ATTACHMENT

377-8176 WIRING GP-CAB

377-8176 WIRING GP-CAB -REAR, RH
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 377-8174 CONTROL & MONITOR GP-CAB
Type 1
ALSO AN ATTACHMENT

377-8176 WIRING GP-CAB

377-8176 WIRING GP-CAB -REAR, RH
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 377-8174 CONTROL & MONITOR GP-CAB
Type 2
ALSO AN ATTACHMENT

397-4672 WIRING GP-CAB

397-4672 WIRING GP-CAB -GRADE CONTROL
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 390-0001 GRADE CONTROL AR
AN ATTACHMENT

432-6275 WIRING GP-CAB

432-6275 WIRING GP-CAB -CAMERA
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 389-9334 CAMERA & MIRROR AR
AN ATTACHMENT

453-8720 WIRING GP-CAB

453-8720 WIRING GP-CAB -QUICK COUPLER
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR
AN ATTACHMENT

453-8721 WIRING GP-CAB

453-8721 WIRING GP-CAB -QUICK COUPLER
S/N KFT1-UP; WTZ1-UP
PART OF 453-8720 WIRING GP-CAB
AN ATTACHMENT

377-8177 WIRING GP-CEM

377-8177 WIRING GP-CEM
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR
Type 1

377-8177 WIRING GP-CEM

377-8177 WIRING GP-CEM
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR
Type 2

380-5463 WIRING GP-CEM

380-5463 WIRING GP-CEM
S/N KFT1-UP; WTZ1-UP
PART OF 394-5352, 469-6266 MODULE AR-CLEAN EMISSIONS

380-5464 WIRING GP-CEM

380-5464 WIRING GP-CEM
S/N KFT1-UP; WTZ1-UP
PART OF 380-5463 WIRING GP-CEM

360-6197 WIRING GP-CHASSIS

360-6197 WIRING GP-CHASSIS -UNIVERSAL QUICK COUPLER
S/N KFT1-UP; WTZ1-UP
PART OF 383-5016 CONTROL AR-COUPLER
AN ATTACHMENT

377-8180 WIRING GP-CHASSIS

377-8180 WIRING GP-CHASSIS -COMBINED FUNCTION, SMARTBOOM
S/N KFT1-UP; WTZ1-UP
PART OF 349-2307 CONTROL AR-AUXILIARY
AN ATTACHMENT

377-8181 WIRING GP-CHASSIS

377-8181 WIRING GP-CHASSIS
S/N KFT1-UP; WTZ1-UP
PART OF 349-2309 CONTROL AR-AUXILIARY
AN ATTACHMENT

377-8184 WIRING GP-CHASSIS

377-8184 WIRING GP-CHASSIS -GRADE CONTROL
S/N KFT1-UP; WTZ1-UP
PART OF 390-0001 GRADE CONTROL AR
AN ATTACHMENT

377-8185 WIRING GP-CHASSIS

377-8185 WIRING GP-CHASSIS -SMARTBOOM
S/N KFT1-UP; WTZ1-UP
PART OF 390-0002 CONTROL AR-BOOM
AN ATTACHMENT

377-8188 WIRING GP-CHASSIS

377-8188 WIRING GP-CHASSIS -REFUELING PUMP
PART OF 390-0013 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

434-3534 WIRING GP-CHASSIS

434-3534 WIRING GP-CHASSIS -CAMERA
S/N KFT1-UP; WTZ1-UP
PART OF 389-9334 CAMERA & MIRROR AR
AN ATTACHMENT

319-0885 WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N KFT1-UP; WTZ1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT

319-0885 WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N KFT1-UP; WTZ1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT

324-5822 WIRING GP-COMMUNICATION

324-5822 WIRING GP-COMMUNICATION
S/N KFT1-UP; WTZ1-UP
PRODUCT LINK 321SR
PART OF 366-8773 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

364-0201 WIRING GP-COMMUNICATION

364-0201 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 349-2065, 366-8775 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

319-0880 WIRING GP-CONSOLE

319-0880 WIRING GP-CONSOLE
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 377-8174 CONTROL & MONITOR GP-CAB
ALSO AN ATTACHMENT

324-5724 WIRING GP-CONSOLE

324-5724 WIRING GP-CONSOLE -LH
S/N KFT1-UP; WTZ1-UP
PART OF 319-0880 WIRING GP-CONSOLE
ALSO AN ATTACHMENT

324-5726 WIRING GP-CONSOLE

324-5726 WIRING GP-CONSOLE -RH
S/N KFT1-UP; WTZ1-UP
PART OF 319-0880 WIRING GP-CONSOLE
ALSO AN ATTACHMENT

328-0247 WIRING GP-CONVERTER

328-0247 WIRING GP-CONVERTER -12-VOLT, 10-AMPERE
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 377-8174 CONTROL & MONITOR GP-CAB
ALSO AN ATTACHMENT

396-3860 WIRING GP-DEF MODULE

396-3860 WIRING GP-DEF MODULE
S/N KFT1-UP; WTZ1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

504-3173 WIRING GP-DEF MODULE

504-3173 WIRING GP-DEF MODULE
S/N KFT1-UP; WTZ1-UP
24-VOLT
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

371-8853 WIRING GP-ELECTRONIC CONTROL

371-8853 WIRING GP-ELECTRONIC CONTROL
S/N SYE1-500
PART OF 373-3834 ENGINE AR-COMPLETE

371-8853 WIRING GP-ELECTRONIC CONTROL

371-8853 WIRING GP-ELECTRONIC CONTROL
S/N SYE501-5242
PART OF 373-3834 ENGINE AR-COMPLETE

371-8853 WIRING GP-ELECTRONIC CONTROL

371-8853 WIRING GP-ELECTRONIC CONTROL
S/N SSE1-UP; SYE5243-UP
PART OF 373-3834 ENGINE AR-COMPLETE

488-6384 WIRING GP-ELECTRONIC CONTROL

488-6384 WIRING GP-ELECTRONIC CONTROL
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE

349-1502 WIRING GP-ENGINE

349-1502 WIRING GP-ENGINE
S/N SSE1-UP; SYE1-9496
PART OF 373-3834 ENGINE AR-COMPLETE

349-1502 WIRING GP-ENGINE

349-1502 WIRING GP-ENGINE
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE

378-1048 WIRING GP-ENGINE

378-1048 WIRING GP-ENGINE
S/N SYE1-500
EXTERNAL
PART OF 371-8853 WIRING GP-ELECTRONIC CONTROL

435-9414 WIRING GP-ENGINE

435-9414 WIRING GP-ENGINE
S/N SYE501-5242
PART OF 371-8853 WIRING GP-ELECTRONIC CONTROL

319-1275 WIRING GP-FRONT

319-1275 WIRING GP-FRONT -GRADE CONTROL, BOOM
S/N KFT1-UP; WTZ1-UP
PART OF 344-0776 BOOM AR-1 PIECE LONG
AN ATTACHMENT

336-6084 WIRING GP-FRONT

336-6084 WIRING GP-FRONT -ACCUGRADE, STICK
S/N KFT1-UP; WTZ1-UP
PART OF 444-4150 STICK AR-HOE
AN ATTACHMENT

324-5789 WIRING GP-MEDIUM PRESSURE

324-5789 WIRING GP-MEDIUM PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 349-2311 CONTROL AR-AUXILIARY
AN ATTACHMENT

377-8258 WIRING GP-PANEL

377-8258 WIRING GP-PANEL -REFUELING PUMP
PART OF 390-0013 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

319-0878 WIRING GP-PLATFORM

319-0878 WIRING GP-PLATFORM
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 377-8174 CONTROL & MONITOR GP-CAB
ALSO AN ATTACHMENT

356-0811 WIRING GP-SENSOR

356-0811 WIRING GP-SENSOR -ENGINE OIL LEVEL
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH @@@@@348-8371@@@@@, PAN GP-OIL
CANNOT BE USED WITH ANY OTHER PAN GP

367-2378 WIRING GP-SENSOR

367-2378 WIRING GP-SENSOR -FUEL PRESSURE
S/N SSE1-UP; SYE1021-9496
PART OF 349-1502 WIRING GP-ENGINE

343-9066 WIRING GP-UNIT INJECTOR

343-9066 WIRING GP-UNIT INJECTOR
S/N SSE1-UP; SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
Type 1
FOR USE WITH UNIT INJECTORS WITHOUT BRAKE
CANNOT BE USED WITH UNIT INJECTORS WITH BRAKE

343-9066 WIRING GP-UNIT INJECTOR

343-9066 WIRING GP-UNIT INJECTOR
S/N SSE1-UP; SYE1-UP
PART OF 381-1732, 520-6566 ENGINE AR-CORE
Type 2
FOR USE WITH UNIT INJECTORS WITHOUT BRAKE
CANNOT BE USED WITH UNIT INJECTORS WITH BRAKE

441-4481 WIRING GP-UNIT INJECTOR

441-4481 WIRING GP-UNIT INJECTOR
S/N SSE1-UP; SYE1-UP
WITHOUT BRAKES
PART OF 343-9066 WIRING GP-UNIT INJECTOR

388-6676 WIRING GP-VALVE

388-6676 WIRING GP-VALVE
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR

RELAY GP

347-1934 RELAY GP

347-1934 RELAY GP -ARD NOZZLE HEATER
S/N KFT1-UP; WTZ1-UP
PART OF 394-5352, 469-6266 MODULE AR-CLEAN EMISSIONS

ELECTRONICS GP-MONITOR

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N KFT1-UP; WTZ1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

392-0196 CONTROL & MTG GP-ELECTRONIC

392-0196 CONTROL & MTG GP-ELECTRONIC
S/N SYE1-1020
PART OF 373-3834 ENGINE AR-COMPLETE
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH AIR COOLED ECM

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N KFT1-UP; WTZ1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

503-8026 ELECTRONICS GP-MONITOR

503-8026 ELECTRONICS GP-MONITOR
S/N KFT1-UP; WTZ1-UP
PART OF 500-9171 MONITOR GP-OPERATOR
ALSO AN ATTACHMENT

377-8174 CONTROL & MONITOR GP-CAB

377-8174 CONTROL & MONITOR GP-CAB
S/N KFT1-UP; WTZ1-UP
PART OF 377-8173 ELECTRICAL AR

HEATER GP

339-7111 HEATER GP-JACKET WATER

339-7111 HEATER GP-JACKET WATER -REAR
S/N KFT1-UP; WTZ1-UP
240-VOLT
PART OF 366-6221, 448-8855 OPTION AR-COLD WEATHER
AN ATTACHMENT

ELECTRONICS GP-COMMUNICATION

319-4468 CONTROL & MTG GP-COMMUNICATION

319-4468 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 121SR
S/N KFT1-UP; WTZ1-UP
PART OF 366-8773 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

319-4469 CONTROL & MTG GP-COMMUNICATION

319-4469 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 321SR
S/N KFT1-UP; WTZ1-UP
PART OF 366-8773 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

356-7806 CONTROL & MTG GP-COMMUNICATION

356-7806 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 522
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 349-2065, 366-8775 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

376-6478 CONTROL GP-COMMUNICATION

376-6478 CONTROL GP-COMMUNICATION -PRODUCT LINK 522
S/N KFT1-UP; WTZ1-UP
PART OF 356-7806 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT

262-1421 ELECTRONICS GP-COMMUNICATION

262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N KFT1-UP; WTZ1-UP
PART OF 319-4469 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT

349-2065 INSTALLATION AR-COMMUNICATION

349-2065 INSTALLATION AR-COMMUNICATION -PRODUCT LINK
S/N KFT1-UP
AN ATTACHMENT

366-8773 INSTALLATION AR-COMMUNICATION

366-8773 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR, INTL
S/N KFT1-UP; WTZ1-UP
AN ATTACHMENT

366-8775 INSTALLATION AR-COMMUNICATION

366-8775 INSTALLATION AR-COMMUNICATION -PRODUCT LINK CELLULAR, INTL
S/N KFT1-UP; WTZ1-UP
PART OF 463-6291, 463-6292, 463-6293, 464-7100, 464-7101, 464-7102 DISTRIBUTION AR
AN ATTACHMENT

319-0885 WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N KFT1-UP; WTZ1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT

319-0885 WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N KFT1-UP; WTZ1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT

324-5822 WIRING GP-COMMUNICATION

324-5822 WIRING GP-COMMUNICATION
S/N KFT1-UP; WTZ1-UP
PRODUCT LINK 321SR
PART OF 366-8773 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

364-0201 WIRING GP-COMMUNICATION

364-0201 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 349-2065, 366-8775 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

319-4467 MOUNTING GP-ANTENNA

319-4467 MOUNTING GP-ANTENNA -PRODUCT LINK
S/N KFT1-UP; WTZ1-UP
PART OF 366-8773 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

356-7805 MOUNTING GP-ANTENNA

356-7805 MOUNTING GP-ANTENNA -PRODUCT LINK CELLULAR
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 349-2065, 366-8775 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

BLOCK GP-JUNCTION

399-3435 BLOCK GP-JUNCTION

399-3435 BLOCK GP-JUNCTION
S/N KFT1-UP; WTZ1-UP
PART OF 396-1789 PANEL GP-CIRCUIT BREAKER

CAMERA GP

416-5123 CAMERA & MOUNTING GP

416-5123 CAMERA & MOUNTING GP -WORK AREA VISUAL SYSTEM, REAR
S/N KFT1-UP; WTZ1-UP
PART OF 389-9334 CAMERA & MIRROR AR
AN ATTACHMENT

389-9334 CAMERA & MIRROR AR

389-9334 CAMERA & MIRROR AR
S/N KFT1-UP; WTZ1-UP
PART OF 463-6291, 463-6292, 463-6293, 464-7100, 464-7101, 464-7102 DISTRIBUTION AR
AN ATTACHMENT

RECEIVER GP

349-2167 RECEIVER GP-LASER

349-2167 RECEIVER GP-LASER
S/N KFT1-UP; WTZ1-UP
PART OF 444-4150 STICK AR-HOE
AN ATTACHMENT

RADIO GP

336-3545 RADIO GP-COMMUNICATION

336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N KFT1-UP; WTZ1-UP
PART OF 319-4468 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT

HARNESS GP

490-6691 HARNESS AS-CAB

490-6691 HARNESS AS-CAB -REAR, RH
S/N KFT1-UP; WTZ1-UP
PART OF 377-8176 WIRING GP-CAB
ALSO AN ATTACHMENT

380-5465 HARNESS AS-CEM

380-5465 HARNESS AS-CEM
S/N KFT1-UP; WTZ1-UP
PART OF 380-5464 WIRING GP-CEM

522-3475 HARNESS AS-CEM

522-3475 HARNESS AS-CEM
S/N KFT1-UP; WTZ1-UP
PART OF 504-3173 WIRING GP-DEF MODULE

438-9950 HARNESS AS-CHASSIS

438-9950 HARNESS AS-CHASSIS
PART OF 377-8188 WIRING GP-CHASSIS
AN ATTACHMENT

186-4603 HARNESS AS-CONTROL

186-4603 HARNESS AS-CONTROL
S/N KFT1-UP; WTZ1-UP
PART OF 398-7290 KIT-GUARD

396-3862 HARNESS AS-CONTROL

396-3862 HARNESS AS-CONTROL
S/N KFT1-UP; WTZ1-UP
PART OF 396-3860 WIRING GP-DEF MODULE

349-1503 HARNESS AS-ENGINE

349-1503 HARNESS AS-ENGINE
S/N SSE1-UP; SYE1-UP
PART OF 349-1502 WIRING GP-ENGINE, 367-2378 WIRING GP-SENSOR

378-1049 HARNESS AS-ENGINE

378-1049 HARNESS AS-ENGINE
S/N SYE1-500
EXTERNAL
PART OF 378-1048 WIRING GP-ENGINE

435-9410 HARNESS AS-ENGINE

435-9410 HARNESS AS-ENGINE
S/N SYE501-UP
PART OF 435-9411 HARNESS AS-ENGINE

435-9411 HARNESS AS-ENGINE

435-9411 HARNESS AS-ENGINE
S/N SYE501-UP
PART OF 435-9414 WIRING GP-ENGINE

452-4685 HARNESS AS-ENGINE

452-4685 HARNESS AS-ENGINE
S/N SSE1-UP; SYE5243-UP
PART OF 371-8853 WIRING GP-ELECTRONIC CONTROL

452-4686 HARNESS AS-ENGINE

452-4686 HARNESS AS-ENGINE
S/N SSE1-UP; SYE5243-UP
PART OF 452-4685 HARNESS AS-ENGINE

476-2142 HARNESS AS-ENGINE

476-2142 HARNESS AS-ENGINE
S/N SYE1-UP
PART OF 476-2144 HARNESS AS-ENGINE

476-2144 HARNESS AS-ENGINE

476-2144 HARNESS AS-ENGINE
S/N SYE1-UP
PART OF 488-6384 WIRING GP-ELECTRONIC CONTROL

487-2116 HARNESS AS-ENGINE

487-2116 HARNESS AS-ENGINE
S/N SSE1-UP; SYE1-UP
WITHOUT BRAKES
PART OF 343-9066 WIRING GP-UNIT INJECTOR

336-5964 HARNESS AS-LIGHTING

336-5964 HARNESS AS-LIGHTING
S/N KFT1-UP; WTZ1-UP
PART OF 398-7289 KIT-GUARD, 484-7816, 484-8798 KIT-OVERHEAD GUARD, 319-1198 LIGHTING GP-FLOOD
AN ATTACHMENT

350-8490 HARNESS AS-POWER

350-8490 HARNESS AS-POWER
S/N KFT1-UP; WTZ1-UP
PART OF 319-0885 WIRING GP-COMMUNICATION
AN ATTACHMENT

435-4367 HARNESS AS-PUMP

435-4367 HARNESS AS-PUMP
PART OF 377-8302 PANEL GP-SWITCH
AN ATTACHMENT

342-3295 HARNESS AS-RADIO

342-3295 HARNESS AS-RADIO
S/N KFT1-UP; WTZ1-UP
PART OF 319-1183 INSTALLATION GP-RADIO
AN ATTACHMENT

349-1504 HARNESS AS-SENSOR

349-1504 HARNESS AS-SENSOR
S/N SSE1-UP; SYE1-UP
PART OF 349-1503 HARNESS AS-ENGINE

369-0168 HARNESS AS-SENSOR

369-0168 HARNESS AS-SENSOR
S/N KFT1-UP; WTZ1-UP
PART OF 377-8180, 377-8181, 377-8185 WIRING GP-CHASSIS
AN ATTACHMENT

355-1642 HARNESS AS-SWITCH

355-1642 HARNESS AS-SWITCH
S/N SSE1-UP; SYE1-UP
PART OF 355-6044 STARTING MOTOR GP-ELECTRIC

380-3896 HARNESS AS-WIRING

380-3896 HARNESS AS-WIRING -DEF INJECTOR
S/N KFT1-UP; WTZ1-UP
PART OF 380-5464 WIRING GP-CEM

441-4482 HARNESS AS-WIRING

441-4482 HARNESS AS-WIRING
S/N SSE1-UP; SYE1-UP
WITHOUT BRAKES, INJECTOR
PART OF 487-2116 HARNESS AS-ENGINE, 441-4481 WIRING GP-UNIT INJECTOR

Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM

ALARM GP

Operation and Maintenance Manual

Travel Alarm - Test - If Equipped
336F and 340F Excavators

Selective Catalytic Reduction Warning System
336F and 340F Excavators

Troubleshooting

Alarm - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

ALTERNATOR GP-CHARGING

Engine News

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Belt - Inspect/Adjust/Replace
336F and 340F Excavators

Special Instruction

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator and Regulator
C9.3 Tier 4 Final Engines

Testing and Adjusting

Charging System - Test
C9.3 Tier 4 Final Engines

Troubleshooting

Alternator Problem - Charging Problem and/or Noisy Operation
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Alternator - Remove and Install
336F and 340F Excavators Engine Supplement

Service Magazine

Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25

A New Fan Drive Belt and New Belt Route Is Now Used on Certain C9.3 Machine Engines {1356, 1359, 1397}
A New Fan Drive Belt and New Belt Route Is Now Used on Certain C9.3 Machine Engines {1356, 1359, 1397}

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

BATTERY GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
336F and 340F Excavators

Battery - Clean
336F and 340F Excavators

Battery Hold-Down - Tighten
336F and 340F Excavators

Battery - Recycle
336F and 340F Excavators

Fuses - Replace
336F and 340F Excavators

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Testing and Adjusting

Battery - Test
C9.3 Tier 4 Final Engines

Troubleshooting

Battery Problem
C9.3 Tier 4 Final Engines

Electrical Power Supply - Test
C9.3 Tier 4 Final Engines

Electrical Power Supply - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Disassembly and Assembly

Battery - Remove and Install
336F and 340F Excavators Engine Supplement

CONTROL GP-ELECTRONIC

Operation and Maintenance Manual

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE AND AFTERTREATMENT SOFTWARE ON CERTAIN TIER 4 FINAL MACHINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE AND AFTERTREATMENT SOFTWARE ON CERTAIN TIER 4 FINAL MACHINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Service Magazine

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Improved B and E Series Hammer Work Tool Parameters are Now Available for Certain Hydraulic Excavators {5488, 6333, 7490, 7610, 7620}
Improved B and E Series Hammer Work Tool Parameters are Now Available for Certain Hydraulic Excavators {5488, 6333, 7490, 7610, 7620}

ELECTRONICS GP-ENGINE

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Software Updates for Certain Tier 4 Final Machines {1920, 7620}
Software Updates for Certain Tier 4 Final Machines {1920, 7620}

Diesel Exhaust Fluid Phase Change Tank Retrofit on Certain 336F Excavators {108E, 1920}
Diesel Exhaust Fluid Phase Change Tank Retrofit on Certain 336F Excavators {108E, 1920}

Diesel Exhaust Fluid Quality Sensor Updates on C9.3 - C18 Tier 4 Final Engines {108U, 1920}
Diesel Exhaust Fluid Quality Sensor Updates on C9.3 - C18 Tier 4 Final Engines {108U, 1920}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE COMMON RAIL FUEL PUMP ON CERTAIN C9.3 ENGINES IN CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COMMON RAIL FUEL PUMP ON CERTAIN C9.3 ENGINES IN CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE AND AFTERTREATMENT SOFTWARE ON CERTAIN ARTICULATED TRUCKS, EXCAVATORS, MOTOR GRADERS, PIPELAYERS, TRACK-TYPE TRACTORS, WHEEL LOADERS, AND WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE AND AFTERTREATMENT SOFTWARE ON CERTAIN ARTICULATED TRUCKS, EXCAVATORS, MOTOR GRADERS, PIPELAYERS, TRACK-TYPE TRACTORS, WHEEL LOADERS, AND WHEEL TRACTOR SCRAPERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Troubleshooting -7 Fuel Injector Not Responding Faults Excessively on Certain C9.3 Tier 4 Final {1290, 1920}
Troubleshooting -7 Fuel Injector Not Responding Faults Excessively on Certain C9.3 Tier 4 Final {1290, 1920}

A Low Intake Pressure Code May Falsely Trip on Certain C9.3, C13, C15, and C18Industrial and Machine Tier 4 Final Engines {7432, 7620}
A Low Intake Pressure Code May Falsely Trip on Certain C9.3, C13, C15, and C18Industrial and Machine Tier 4 Final Engines {7432, 7620}

Service Letter-China

Service Letter-Asia

Service Letter-APD

Troubleshooting

System Overview
C9.3 Tier 4 Final Engines

Engine Monitoring System
C9.3 Tier 4 Final Engines

Diagnostic Capabilities
C9.3 Tier 4 Final Engines

Configuration Parameters
C9.3 Tier 4 Final Engines

Engine Shutdown Occurrence
C9.3 Tier 4 Final Engines

Engine Shutdown Occurs Intermittently
C9.3 Tier 4 Final Engines

Engine Shutdown While Idling
C9.3 Tier 4 Final Engines

Engine Stalls at Low RPM
C9.3 Tier 4 Final Engines

Cat ET Service Features
C9.3 Tier 4 Final Engines

Customer Passwords
C9.3 Tier 4 Final Engines

Factory Passwords
C9.3 Tier 4 Final Engines

ECM Will Not Accept Factory Passwords
C9.3 Tier 4 Final Engines

Test ECM Mode
C9.3 Tier 4 Final Engines

ECM Software - Install
C9.3 Tier 4 Final Engines

ECM - Replace
C9.3 Tier 4 Final Engines

Engine Overcrank Occurrence
C9.3 Tier 4 Final Engines

Data Link Configuration Status - Test
C9.3 Tier 4 Final Engines

Cat ET Service Error Identifiers
C9.3 Tier 4 Final Engines

Electronic Service Tool Does Not Communicate
C9.3 Tier 4 Final Engines

Diagnostic Trouble Codes
C9.3 Tier 4 Final Engines

Event Codes
C9.3 Tier 4 Final Engines

Data Link - Test
C9.3 Tier 4 Final Engines

DEF Control Module Power - Test
C9.3 Tier 4 Final Engines

Shutdown (Ground Level) - Test
C9.3 Tier 4 Final Engines

Timing - Calibrate
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Engine Control Module - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Engine Electronic Control - Remove and Install
336F and 340F Excavators Engine Supplement

Speed/Timing Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

New Software Is Now Used on Certain C9.3, C13, C15, and C18 Tier 4 Final Machine Engines {7620}
New Software Is Now Used on Certain C9.3, C13, C15, and C18 Tier 4 Final Machine Engines {7620}

New Software Updates Are Now Used On Certain Tier 4 Final Machines {1920}
New Software Updates Are Now Used On Certain Tier 4 Final Machines {1920}

Updated Engine Software is Now Used on Certain Cat® Machine Engines {1901, 1920}
Updated Engine Software is Now Used on Certain Cat^® Machine Engines {1901, 1920}

ELECTRONICS GP-POWER TRAIN

Special Instruction

Systems Operation

General Information
Machine Security System (MSS3i) Integrated

System Overview
Machine Security System (MSS3i) Integrated

Operation of Status Indicator
Machine Security System (MSS3i) Integrated

Key Information
Machine Security System (MSS3i) Integrated

Scheduled Access - "Security System Bypass Times"
Machine Security System (MSS3i) Integrated

Diagnostic Operation
Machine Security System (MSS3i) Integrated

Protected Functions
Machine Security System (MSS3i) Integrated

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Electronic Control Module (ECM)
Machine Security System (MSS3i) Integrated

System Components
Machine Security System (MSS3i) Integrated

Data Link
Machine Security System (MSS3i) Integrated

Normal Operation
Machine Security System (MSS3i) Integrated

Testing and Adjusting

General Information
Machine Security System (MSS3i) Integrated

Troubleshooting
Machine Security System (MSS3i) Integrated

Key - Program
Machine Security System (MSS3i) Integrated

Scheduled Access - Program - Security System Bypass
Machine Security System (MSS3i) Integrated

Time - Set
Machine Security System (MSS3i) Integrated

Factory Password - Obtain
Machine Security System (MSS3i) Integrated

Configuration
Machine Security System (MSS3i) Integrated

Machine Security System - Uninstall
Machine Security System (MSS3i) Integrated

Glossary of Terms
Machine Security System (MSS3i) Integrated

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

CONTROL GP-GRADE

Operation and Maintenance Manual

Safety Messages
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

General Information
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Display Description
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Flashing Messages
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System Components
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Grade Control Guidance Screen
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Grade Control Configuration
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Machine Monitoring System Configuration
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Startup
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Operator Controls
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

End User License Agreement
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Glossary
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Special Instruction

Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat^® Grade Control on Certain Series E and Series F Excavators {5736, 7220}

Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat^® Grade Control Hydraulic Excavators {7220}

Technical Information Bulletin

SNM940 Radio CAN Connection to the Cat® Grade Control or AccuGrade System Could Cause Communication Failure with GNSS System {7220, 733T}
SNM940 Radio CAN Connection to the Cat^® Grade Control or AccuGrade System Could Cause Communication Failure with GNSS System {7220, 733T}

Systems Operation

General Information
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System Components
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Guidance Terms
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Machine Dimensions
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Testing and Adjusting

Machine Dimensions - Configure
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System - Set
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System - Calibrate
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System Accuracy - Test
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System - Set
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

ELECTRONICS GP-IMPLEMENT

Special Instruction

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP-MACHINE

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Machine Security System - If Equipped
336F and 340F Excavators

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

Machine Security System - MSS3i and MSS S1 - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Special Instruction

Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}

Procedure For Flashing Monitor Software on 300D2, 300E, and 300F Hydraulic Excavators with the 466-3565 Monitor{7610, 7620}
Procedure For Flashing Monitor Software on 300D2, 300E, and 300F Hydraulic Excavators with the 466-3565 Monitor{7610, 7620}

Rework Procedure to Install Fine Grading on Certain Excavators {1408, 5480, 7610, 7620}
Rework Procedure to Install Fine Grading on Certain Excavators {1408, 5480, 7610, 7620}

Procedure to Retrofit a 486-1416 Machine Security System Kit on Certain F Series Excavators {7631}
Procedure to Retrofit a 486-1416 Machine Security System Kit on Certain F Series Excavators {7631}

Technical Information Bulletin

Quick Coupler Installation Status{7610, 7620}
Quick Coupler Installation Status{7610, 7620}

Systems Operation

General Information
Machine Security System (MSS3i) Integrated

System Overview
Machine Security System (MSS3i) Integrated

Operation of Status Indicator
Machine Security System (MSS3i) Integrated

Key Information
Machine Security System (MSS3i) Integrated

Scheduled Access - "Security System Bypass Times"
Machine Security System (MSS3i) Integrated

Diagnostic Operation
Machine Security System (MSS3i) Integrated

Protected Functions
Machine Security System (MSS3i) Integrated

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Electronic Control Module (ECM)
Machine Security System (MSS3i) Integrated

System Components
Machine Security System (MSS3i) Integrated

Data Link
Machine Security System (MSS3i) Integrated

Normal Operation
Machine Security System (MSS3i) Integrated

Testing and Adjusting

General Information
Machine Security System (MSS3i) Integrated

Troubleshooting
Machine Security System (MSS3i) Integrated

Key - Program
Machine Security System (MSS3i) Integrated

Scheduled Access - Program - Security System Bypass
Machine Security System (MSS3i) Integrated

Time - Set
Machine Security System (MSS3i) Integrated

Factory Password - Obtain
Machine Security System (MSS3i) Integrated

Configuration
Machine Security System (MSS3i) Integrated

Machine Security System - Uninstall
Machine Security System (MSS3i) Integrated

Glossary of Terms
Machine Security System (MSS3i) Integrated

Troubleshooting

ECM Software - Install
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

ECM - Configure
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

ECM - Replace
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

CAN Data Link - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

A New Machine ECM Software is Now Used on Certain 336F and 340F Excavators and 336F Mobile Hydraulic Power Units {7610, 7620}
2015/06/25

New ET Software Allows Tool Configuration Automatically to the New Machine ECM for Certain E/F Series Excavators and Mobile Hydraulic Power Units {7610, 7620}
2015/06/26

New Machine ECM Software Fixing the Generation of a False Travel Alarm 376-5 Diagnostic Trouble Code is Now Used on Certain E Series and F Series Excavators and Mobile Hydraulic Power Units {7610, 7620}
2015/09/21

An Adjustment to Gas Temperature Threshold is Now Used on Certain 336F, 349F, and 352F Excavators Equipped with a Phase Tank {7610, 7620}
An Adjustment to Gas Temperature Threshold is Now Used on Certain 336F, 349F, and 352F Excavators Equipped with a Phase Tank {7610, 7620}

CONTROL GP-SPEED

Systems Operation

Engine Control
336F and 340F Excavators Machine System

CONTROL GP-UNPROGRAMMED

Service Magazine

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

CONTROL GP-VOLTAGE

Disassembly and Assembly

Voltage Control (Load Protection) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

ELECTRICAL GP

Operation and Maintenance Manual

General Information
Regulatory Compliance Information

ELECTRONICS GP

Special Instruction

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat^® Products {1408}

Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}

Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}

Service Magazine

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

SITECH Service Providers Can Repair Certain Cat® Grade Control and AccuGrade® System Components {5267, 7610, 7620}
SITECH Service Providers Can Repair Certain Cat^® Grade Control and AccuGrade^® System Components {5267, 7610, 7620}

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

New Software Is Now Used on Certain C9.3, C13, C15, and C18 Tier 4 Final Machine Engines {7620}
New Software Is Now Used on Certain C9.3, C13, C15, and C18 Tier 4 Final Machine Engines {7620}

New Software is Now Used on Certain C9.3 through C18 Tier 4 Final Machine Engines {1000, 108U, 7620}
New Software is Now Used on Certain C9.3 through C18 Tier 4 Final Machine Engines {1000, 108U, 7620}

New Machine Software Group Is Now Available on Certain Excavators {7620}
New Machine Software Group Is Now Available on Certain Excavators {7620}

A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

IGNITION GP

Disassembly and Assembly

Ignition Coil - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement

Ignition Coil - Remove and Install
C9.3 Engines for Caterpillar Built Machines

LIGHTING GP

Operation and Maintenance Manual

High Intensity Discharge Lamp (HID) - Replace - If Equipped
336F and 340F Excavators

Service Magazine

An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}

MOTOR GP

Troubleshooting

Engine Does Not Crank
C9.3 Tier 4 Final Engines

Aftertreatment Cooling Fan - Test
C9.3 Tier 4 Final Engines

Engine Overcrank Occurrence
C9.3 Tier 4 Final Engines

Engine Cranks but Does Not Start
C9.3 Tier 4 Final Engines

DEF Pump Motor - Test
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Refrigerant Condenser and Mounting - Remove and Install
336F and 340F Excavators Engine Supplement

PANEL GP-CIRCUIT BREAKER

Operation and Maintenance Manual

Circuit Breakers - Reset
336F and 340F Excavators

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Technical Information Bulletin

The Circuit Breaker Film on the Circuit Breaker Box May Be Incorrect on Certain E Series and F Series Excavators{1417}
The Circuit Breaker Film on the Circuit Breaker Box May Be Incorrect on Certain E Series and F Series Excavators{1417}

PANEL GP-FUSE

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

SENSOR GP

Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}

Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat^® Grade Control Hydraulic Excavators {7220}

Installation Procedure for the 452-1782 Auxiliary Control Ar on Certain Hydraulic Excavators{1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 7405, 7557}
Installation Procedure for the 452-1782 Auxiliary Control Ar on Certain Hydraulic Excavators{1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 7405, 7557}

Installation Procedure for the 452-1787 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5705, 7301, 7405, 7557}
Installation Procedure for the 452-1787 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5705, 7301, 7405, 7557}

Installation Procedure for the 486-8676 Control Ar - Auxiliary on Certain Hydraulic Excavators{1408, 1439, 5057, 5059, 5705, 7301, 7405, 7557}
Installation Procedure for the 486-8676 Control Ar - Auxiliary on Certain Hydraulic Excavators{1408, 1439, 5057, 5059, 5705, 7301, 7405, 7557}

Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat^® Grade Control on Certain Series E and Series F Excavators {5736}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}

Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}

Specifications

Coolant Temperature Sensor
C9.3 Tier 4 Final Engines

Engine Oil Pressure Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Atmospheric Pressure Sensor
C9.3 Tier 4 Final Engines

Engine Oil Pressure Sensor
C9.3 Tier 4 Final Engines

Coolant Temperature Sensor
C9.3 Tier 4 Final Engines

Atmospheric Pressure Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Temperature Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Coolant Temperature Sensor
C9.3 Tier 4 Final Engines

Inlet Air Temperature Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Coolant Temperature Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Atmospheric Pressure Sensor
C9.3 Tier 4 Final Engines

Crankcase Pressure Sensor
C9.3 Tier 4 Final Engines

Pressure Sensor (DPF Inlet)
C9.3 Tier 4 Final Engines

Pressure Sensor (ARD Combustion Air)
C9.3 Tier 4 Final Engines

Temperature Sensor (DPF Inlet, Flame Detect)
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C9.3 Tier 4 Final Engines

Temperature Sensor (NOx Reduction System)
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Pressure Sensor (NOx Reduction System)
C9.3 Tier 4 Final Engines

Temperature Sensor (NOx Reduction System)
C9.3 Tier 4 Final Engines

Engine Oil Pressure Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Temperature Sensor
C9.3 Tier 4 Final Engines

Engine Oil Pressure Sensor
C9.3 Tier 4 Final Engines

Inlet Air Temperature Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Temperature Sensor
C9.3 Tier 4 Final Engines

Pressure Sensor (NRS Differential)
C9.3 Tier 4 Final Engines

Temperature Sensor (DPF Inlet, Flame Detect)
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Nitrogen Oxide Sensor - Engine Exhaust Out
C9.3 Tier 4 Final Engines

Nitrogen Oxide Sensor - Exhaust Pipe Out
C9.3 Tier 4 Final Engines

Nitrogen Oxide Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Position Sensor (Stick)
336F and 340F Excavators Machine System Specifications

Inlet Manifold Temperature Sensor
C9.3 Tier 4 Final Engines

Pressure Sensor - BOOM DOWN
336F and 340F Excavators Machine System Specifications

Nitrogen Oxide Sensor
C9.3 Tier 4 Final Engines

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Sensors
336F and 340F Excavators Tool Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Service Letter-APD

Troubleshooting

Coolant Level - Test
C9.3 Tier 4 Final Engines

Sensor Calibration Required - Test
C9.3 Tier 4 Final Engines

Sensor Signal (Analog, Passive) - Test
C9.3 Tier 4 Final Engines

Sensor Supply - Test
C9.3 Tier 4 Final Engines

Sensor (Data Link Type) - Test
C9.3 Tier 4 Final Engines

Speed/Timing - Test
C9.3 Tier 4 Final Engines

Sensor Signal (Analog, Active) - Test
C9.3 Tier 4 Final Engines

NOx Sensor - Test
C9.3 Tier 4 Final Engines

DEF Pump Pressure Sensor - Test
C9.3 Tier 4 Final Engines

DEF Pump Sensor Supply - Test
C9.3 Tier 4 Final Engines

NOx Conversion Is Low
C9.3 Tier 4 Final Engines

SCR Catalyst Inlet Temperature Sensor - Test
C9.3 Tier 4 Final Engines

Cooling Fan Speed - Test
C9.3 Tier 4 Final Engines

Water in Fuel - Test
C9.3 Tier 4 Final Engines

Sensor Signal (Analog, Passive) - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Sensor Supply - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Sensor Signal (PWM) - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Timing - Calibrate
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Fuel Pressure Sensor - Remove and Install - Rail
C9.3 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Coolant Temperature Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Crankcase Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement

Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement

Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement

Atmospheric Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (DPF) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Temperature Sensor (Catalyst Inlet) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (ARD Combustion Air) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Soot Sensor - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement

Speed/Timing Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Nitrogen Oxide Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (NRS Absolute) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (NRS Differential) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Service Magazine

A Torque Specification Prevents Damage to the Liquid Level Sensor Gp {7422}
2015/08/19

New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}

Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}

SOLENOID GP

Specifications

Exhaust Gas Valve (NRS)
C9.3 Tier 4 Final Engines

Troubleshooting

Cooling Fan Control - Test
C9.3 Tier 4 Final Engines

Injector Solenoid - Test
C9.3 Tier 4 Final Engines

Cooling Fan Reversing - Test
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Solenoid Valve (ARD Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Solenoid Valve (DEF Heater Coolant) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

STARTING AID GP

Operation and Maintenance Manual

Ether Starting Aid Cylinder - Replace - If Equipped
336F and 340F Excavators

Engine Starting
336F and 340F Excavators

Specifications

Ether Starting Aid
336F and 340F Excavators Machine System Specifications

STARTING MOTOR GP

Special Instruction

Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
C9.3 Tier 4 Final Engines

Testing and Adjusting

Electric Starting System - Test
C9.3 Tier 4 Final Engines

Pinion Clearance - Adjust
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Electric Starting Motor - Remove and Install
336F and 340F Excavators Engine Supplement

Service Magazine

A New Starter Flange Is Now Available on Certain Machine Engines {1453}
A New Starter Flange Is Now Available on Certain Machine Engines {1453}

A New Starter Drive Housing Is Now Used on Certain C9, C9.3, C13, C15, C18, C27, C32, and 3516 Machine Engines {1453}
A New Starter Drive Housing Is Now Used on Certain C9, C9.3, C13, C15, C18, C27, C32, and 3516 Machine Engines {1453}

SWITCH GP

Operation and Maintenance Manual

Battery Disconnect Switch
336F and 340F Excavators

Special Instruction

Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}

Specifications

Switch Panel
336F and 340F Excavators Machine System Specifications

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
336F and 340F Excavators Tool Control System

Troubleshooting

Coolant Level - Test
C9.3 Tier 4 Final Engines

Cooling Fan Control - Test
C9.3 Tier 4 Final Engines

Speed Control - Test
C9.3 Tier 4 Final Engines

Shutdown (Ground Level) - Test
C9.3 Tier 4 Final Engines

Window Wiper Delay - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Switch Circuits - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Relay - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Switch Circuits - Test
C9.3 Tier 4 Final Engines

Service Magazine

Improved Start Switch Assembly is Now Used on Certain Cat® Products {1416}
Improved Start Switch Assembly is Now Used on Certain Cat^® Products {1416}

TOOLS

Tool Operating Manual

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Systems Operation

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

Electronic Service Tools
C9.3 Tier 4 Final Engines

Cat ET Service Features
C9.3 Tier 4 Final Engines

Customer Passwords
C9.3 Tier 4 Final Engines

Factory Passwords
C9.3 Tier 4 Final Engines

ECM Will Not Accept Factory Passwords
C9.3 Tier 4 Final Engines

Test ECM Mode
C9.3 Tier 4 Final Engines

Cat ET Service Error Identifiers
C9.3 Tier 4 Final Engines

Electronic Service Tool Does Not Communicate
C9.3 Tier 4 Final Engines

Service Tools
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

VALVE GP

Specifications

Exhaust Gas Valve (NRS)
C9.3 Tier 4 Final Engines

Troubleshooting

Solenoid Valve - Test
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Solenoid Valve (ARD Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Solenoid Valve (DEF Heater Coolant) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

WARNING GP

Testing and Adjusting

Overload Warning - Set - If Equipped
336F and 340F Excavators Machine System

Troubleshooting

Alarm - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
336F and 340F Excavators

Battery - Recycle
336F and 340F Excavators

SmartBoom Operation - If Equipped
336F and 340F Excavators

SmartBoom Control - If Equipped
336F and 340F Excavators

Power Receptacle - If Equipped
336F and 340F Excavators

Fuses - Replace
336F and 340F Excavators

Battery Disconnect Switch
336F and 340F Excavators

Fuses - Replace
336F and 340F Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of the 336-6360 Cab Wiring Gp {1408}
Installation of the 336-6360 Cab Wiring Gp {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for 324-5789 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}
Installation Procedure for 324-5789 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 350-8401 Cab Wiring Gp on Certain Hydraulic Excavators{1408, 7301}
Installation of the 350-8401 Cab Wiring Gp on Certain Hydraulic Excavators{1408, 7301}

Installation Procedure for the 453-8720 Cab Wiring Gp on Certain Hydraulic Excavators{1408}
Installation Procedure for the 453-8720 Cab Wiring Gp on Certain Hydraulic Excavators{1408}

Installation of the 453-8718 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Installation of the 453-8718 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}

Installation Procedure for the 455-6283 Coupler Control Ar {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the 455-6283 Coupler Control Ar {1408, 5057, 7301, 7405, 7557}

Installation Procedure for the 452-1788 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5070, 5073, 7405, 7553, 7557}
Installation Procedure for the 452-1788 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5070, 5073, 7405, 7553, 7557}

Installation Procedure for 377-8181 Chassis Wiring Gp {1408}
Installation Procedure for 377-8181 Chassis Wiring Gp {1408}

Installation Procedure for 377-8180 Chassis Wiring Gp of Certain Hydraulic Excavators{1408}
Installation Procedure for 377-8180 Chassis Wiring Gp of Certain Hydraulic Excavators{1408}

Installation Procedure for the 461-7896 Coupler Control Ar on Certain 336F Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the 461-7896 Coupler Control Ar on Certain 336F Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

Rework Procedure to Install Fine Grading on Certain Excavators {1408, 5480, 7610, 7620}
Rework Procedure to Install Fine Grading on Certain Excavators {1408, 5480, 7610, 7620}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN E AND F SERIES EXCAVATORS

Service Letter-Americas

Technical Information Bulletin

Steel Cable Strap May Damage the Temperature Sensor Wires on Certain Tier 4 Final Engines {1408, 1900}
Steel Cable Strap May Damage the Temperature Sensor Wires on Certain Tier 4 Final Engines {1408, 1900}

Specifications

Electronic Unit Injector Wiring
C9.3 Tier 4 Final Engines

Tool Operating Manual

Service Letter-China

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
336F and 340F Excavators Tool Control System

Sensors
336F and 340F Excavators Tool Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C9.3 Tier 4 Final Engines

Connector Contact Description
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Overload Warning - Set - If Equipped
336F and 340F Excavators Machine System

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors
C9.3 Tier 4 Final Engines

Electrical Connectors - Inspect
C9.3 Tier 4 Final Engines

ARD Ignition - Test
C9.3 Tier 4 Final Engines

Electrical Connector - Inspect
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

System Schematic
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Connector Locations
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Wiring Harness (Open Circuit) - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Wiring Harness (Short Circuit) - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Connector Contact Description
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit

Disassembly and Assembly

Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Nozzle Heater Harness - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Service Magazine

Rework Procedure is Available to Replace a Cab Harness Connector to Match the Harness Connector of a Field Installed Product Link Kit on Certain E Series and F Series Excavators {1408, 7301}
2014/11/17

A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07

A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}

New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}

New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}
New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}

CONNECTION GP

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}

RELAY GP

Specifications

Relay (ARD Nozzle Heater)
C9.3 Tier 4 Final Engines

Systems Operation

Air Conditioning and Heating System Relay Operation
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Heating

Disassembly and Assembly

Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement

Relay (ARD Nozzle Heater) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Service Magazine

Improved ARD Heater Assemblies Are Now Used on Certain C9.3, C13, C15, and C18 Machine Engines {4493}
Improved ARD Heater Assemblies Are Now Used on Certain C9.3, C13, C15, and C18 Machine Engines {4493}

A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493}
A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493}

ELECTRONICS GP-MONITOR

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Monitoring System
336F and 340F Excavators

General Information
Regulatory Compliance Information

Special Instruction

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Systems Operation

General Information
F Series Excavator Monitoring System

Input Components
F Series Excavator Monitoring System

Warning Operation
F Series Excavator Monitoring System

Password Entry
F Series Excavator Monitoring System

Data Link
F Series Excavator Monitoring System

Menu Outline
F Series Excavator Monitoring System

Display Setting Menu
F Series Excavator Monitoring System

Language Select Menu
F Series Excavator Monitoring System

Performance Menu
F Series Excavator Monitoring System

Power Mode Setting Menu
F Series Excavator Monitoring System

Maintenance Intervals Menu
F Series Excavator Monitoring System

Work Tool Select Menu
F Series Excavator Monitoring System

Current Totals Menu
F Series Excavator Monitoring System

Engine Shutdown Setting Menu
F Series Excavator Monitoring System

Password Change Menu
F Series Excavator Monitoring System

Controls Setup Menu - If Equipped
F Series Excavator Monitoring System

Reverse Fan Setting Menu - If Equipped
F Series Excavator Monitoring System

Service Menu
F Series Excavator Monitoring System

ECM Summary Menu
F Series Excavator Monitoring System

Diagnostic Menu
F Series Excavator Monitoring System

Status Menu
F Series Excavator Monitoring System

Configuration Menu
F Series Excavator Monitoring System

Tool Programming Menu
F Series Excavator Monitoring System

Override Parameters Menu
F Series Excavator Monitoring System

Calibration Menu
F Series Excavator Monitoring System

Device Test Menu
F Series Excavator Monitoring System

WinFlash Menu
F Series Excavator Monitoring System

Prestart Monitoring Function - If Equipped
F Series Excavator Monitoring System

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

New Phone Number for VIMS Support Is Now Available for All Cat® Products Equipped with VIMS {7601}
2015/03/02

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Reactivating Procedure Is Now Used on Certain Excavators Equipped with PL522 {7610, 7620}
2015/09/02

New Cat Grade Control ECM Software is Now Used on Certain Excavators {5267, 7610, 7620}
New Cat Grade Control ECM Software is Now Used on Certain Excavators {5267, 7610, 7620}

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

HEATER GP

Operation and Maintenance Manual

Engine Starting
336F and 340F Excavators

ELECTRONICS GP-WORK TOOL

Special Instruction

Technical Information Bulletin

Quick Coupler Installation Status{7610, 7620}
Quick Coupler Installation Status{7610, 7620}

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP-COMMUNICATION

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

Operation and Maintenance Manual

Product Link
336F and 340F Excavators

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

Wireless Device - EC520 - If Equipped
Regulatory Compliance Information

Wireless Device - TD520 - If Equipped
Regulatory Compliance Information

Wireless Device - MS995, MS975, MS955 Receiver - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Special Instruction

Installation Guide for Product Link PL121SR and PL321{7606}
Installation Guide for Product Link PL121SR and PL321{7606}

Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}

Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Invalid Product Link Status Information is Displayed on the Monitors of Certain E Series and F Series Excavators {7602, 7606, 7610, 7620}
Invalid Product Link Status Information is Displayed on the Monitors of Certain E Series and F Series Excavators {7602, 7606, 7610, 7620}

Service Letter-China

Service Letter-Asia

Service Letter-APD

Service Magazine

Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/04/24

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Available for All Cat® Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606}
2014/08/08

Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
2015/02/17

Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24

Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat® Products with Cat® Product Link 121/321 {7606}
2014/12/24

Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06

Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606, 7620}
2015/06/26

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Reactivating Procedure Is Now Used on Certain Excavators Equipped with PL522 {7610, 7620}
2015/09/02

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
2015/09/11

CAMERA GP

Operation and Maintenance Manual

Camera
336F and 340F Excavators

Camera - Clean - If Equipped
336F and 340F Excavators

Special Instruction

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

ELECTRONICS GP-GENERATOR SET

Special Instruction

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

METER GP-SERVICE

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

ANTENNA GP

Specifications

Antenna
336F and 340F Excavators Machine System Specifications

RADIO GP

Technical Information Bulletin

HARNESS GP

Special Instruction

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

Rework Procedure to Install Fine Grading on Certain Excavators {1408, 5480, 7610, 7620}
Rework Procedure to Install Fine Grading on Certain Excavators {1408, 5480, 7610, 7620}

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Tool Operating Manual

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Magazine