ENGINE ARRANGEMENT
ENGINE ARAIR INLET AND EXHAUST SYSTEM
EXHAUST GPBASIC ENGINE
SERPENTINE/V-BELTSBRACKET GP-ENGINE
ENGINE ARRANGEMENT
ENGINE AR#SEBP75530040
373-3834: ENGINE AR-COMPLETE
373-3834 ENGINE AR-COMPLETE
S/N SSE1-UP; SYE1-UP
PART OF 381-2556 MODULE AR-ENGINE & CEM
S/N SSE1-UP; SYE1-UP
PART OF 381-2556 MODULE AR-ENGINE & CEM
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 371-1911 Y | [1] | ADAPTER GP-EXHAUST DIFFUSER | ||
| 345-1176 Y | [1] | ALTERNATOR GP-CHARGING | ||
| 344-5154 Y | [1] | BASE GP-OIL FILTER (REMOTE MOUNTED) | ||
| 327-3980 Y | [1] | BELT GP-SERPENTINE | ||
| 434-6486 Y | [1] | BRACKET GP-MOUNTING | ||
| 316-8988 Y | [1] | COMPRESSOR & MTG GP-REFRIG | ||
| 392-0196 Y | [1] | CONTROL & MTG GP-ELECTRONIC | ||
| S/N SYE1-1020 | ||||
| 394-8802 Y | [1] | CONTROL & MTG GP-ENGINE ELEK | ||
| S/N SYE1021-UP | ||||
| 388-3539 Y | [1] | CONTROL & MTG GP-ENGINE ELEK (ENGINE CONTROL MODULE) | ||
| 188-3826 Y | [1] | COOLER GP-ENGINE OIL | ||
| 424-5993 Y | [1] | COVER & MTG GP-CYLINDER BLOCK | ||
| 325-8452 Y | [1] | COVER GP-ENGINE | ||
| 127-5728 Y | [1] | COVER GP-FLYWHEEL HOUSING | ||
| 269-5311 Y | [1] | COVER GP-FRONT HOUSING (ENGINE OIL FILL) | ||
| 269-5325 Y | [1] | COVER GP-FRONT HOUSING (OPTIONAL EQUIPMENT) | ||
| 338-2640 Y | [1] | COVER GP-FRONT HOUSING | ||
| 350-1302 Y | [1] | COVER GP-SOUND SUPPRESSION (ENGINE OIL PAN) | ||
| 349-1527 Y | [1] | COVER GP-VALVE MECHANISM | ||
| 347-0608 Y | [1] | DAMPER & PULLEY GP | ||
| 345-6680 Y | [1] | DRIVE GP-FAN | ||
| 364-6374 Y | [1] | ELBOW GP-AIR INLET | ||
| 278-0244 Y | [1] | ELBOW GP-WATER | ||
| 373-3833 Y | [1] | ENGINE AR | ||
| 346-5148 Y | [1] | FASTENER GP-FUEL INJ PUMP | ||
| 348-1099 Y | [1] | FASTENER GP-WATER PUMP | ||
| 345-2333 Y | [1] | FILTER GP-FUEL | ||
| S/N SYE1-1020 | ||||
| 388-3570 Y | [1] | FILTER GP-FUEL | ||
| S/N SYE1021-UP | ||||
| 319-8165 Y | [1] | FLYWHEEL GP | ||
| 345-0374 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE) | ||
| 344-2902 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 299-8022 Y | [1] | HOUSING GP-FRONT | ||
| 355-7364 Y | [1] | LIFTING GP-ENGINE | ||
| 345-9019 Y | [1] | LINES GP-AIR (EXH GAS VALVE TO EXH COOLER) | ||
| 286-9679 Y | [1] | LINES GP-ENGINE OIL (REAR SUMP) | ||
| 357-6365 Y | [1] | LINES GP-ENGINE OIL | ||
| 337-8004 Y | [1] | LINES GP-FUEL | ||
| S/N SYE1-1020 | ||||
| 331-2758 Y | [1] | LINES GP-FUEL | ||
| S/N SYE1021-UP | ||||
| 348-2695 Y | [1] | LINES GP-FUEL FILTER | ||
| S/N SYE1-1020 | ||||
| 448-0226 Y | [1] | LINES GP-FUEL FILTER | ||
| S/N SYE1021-UP | ||||
| 348-7919 Y | [1] | LINES GP-TURBOCHARGER | ||
| 344-9397 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
| 357-7026 Y | [1] | LINES GP-TURBOCHARGER WATER | ||
| S/N SYE1-500 | ||||
| 342-7877 Y | [1] | LINES GP-WATER (EXHAUST COOLER) | ||
| S/N SYE1-500 | ||||
| 423-4285 Y | [1] | LINES GP-WATER | ||
| S/N SYE501-UP | ||||
| 424-0771 Y | [1] | LINES GP-WATER | ||
| 343-0585 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 344-8267 Y | [1] | MANIFOLD GP-INLET | ||
| 344-0368 Y | [1] | MOUNTING GP-ALTERNATOR & COMPR | ||
| 367-7314 Y | [1] | MOUNTING GP-CONNECTOR (ENGINE) | ||
| 348-8371 Y | [1] | PAN GP-OIL | ||
| 275-4260 Y | [1] | PLUG GP-CYLINDER BLOCK (JACKET WATER HEATER) | ||
| 275-8699 Y | [1] | PLUG GP-CYLINDER BLOCK (AUXILIARY COOLER) | ||
| 350-0195 Y | [1] | PLUG GP-CYLINDER HEAD | ||
| S/N SYE1-500 | ||||
| 346-4997 Y | [1] | PLUG GP-CYLINDER HEAD | ||
| S/N SYE501-UP | ||||
| 292-9786 Y | [1] | PLUG GP-ENGINE (COMPRESSION BRAKE) | ||
| 347-2324 Y | [1] | PLUG GP-WATER LINES | ||
| 342-7219 Y | [1] | PULLEY GP-CRANKSHAFT | ||
| 326-3561 Y | [1] | REGULATOR GP-TEMPERATURE | ||
| 295-2351 Y | [1] | SEAL GP-CRANKSHAFT (REAR) | ||
| 349-4782 Y | [1] | SPACER GP-AIR INLET | ||
| 355-6044 Y | [1] | STARTING MOTOR GP-ELECTRIC | ||
| 346-9527 Y | [1] | SUPPORT GP-ENGINE | ||
| 374-8300 Y | [1] | TURBOCHARGER GP | ||
| S/N SYE1-500 | ||||
| 376-3797 Y | [1] | TURBOCHARGER GP | ||
| S/N SYE501-UP | ||||
| 348-7946 Y | [1] | VALVE GP-SOLENOID (24-VOLT) | ||
| 371-8853 Y | [1] | WIRING GP-ELECTRONIC CONTROL | ||
| 349-1502 Y | [1] | WIRING GP-ENGINE | ||
| 356-0811 Y | [1] | WIRING GP-SENSOR (ENGINE OIL LEVEL) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530041
485-9800: ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 371-1911 Y | [1] | ADAPTER GP-EXHAUST DIFFUSER | ||
| 345-1176 Y | [1] | ALTERNATOR GP-CHARGING | ||
| 344-5154 Y | [1] | BASE GP-OIL FILTER (REMOTE MOUNTED) | ||
| 327-3980 Y | [1] | BELT GP-SERPENTINE | ||
| 434-6486 Y | [1] | BRACKET GP-MOUNTING | ||
| 316-8988 Y | [1] | COMPRESSOR & MTG GP-REFRIG | ||
| 388-3539 Y | [1] | CONTROL & MTG GP-ENGINE ELEK (ENGINE CONTROL MODULE) | ||
| 394-8802 Y | [1] | CONTROL & MTG GP-ENGINE ELEK | ||
| 188-3826 Y | [1] | COOLER GP-ENGINE OIL | ||
| 424-5993 Y | [1] | COVER & MTG GP-CYLINDER BLOCK | ||
| 325-8452 Y | [1] | COVER GP-ENGINE | ||
| 127-5728 Y | [1] | COVER GP-FLYWHEEL HOUSING | ||
| 269-5311 Y | [1] | COVER GP-FRONT HOUSING (ENGINE OIL FILL) | ||
| 269-5325 Y | [1] | COVER GP-FRONT HOUSING (OPTIONAL EQUIPMENT) | ||
| 338-2640 Y | [1] | COVER GP-FRONT HOUSING | ||
| 350-1302 Y | [1] | COVER GP-SOUND SUPPRESSION (ENGINE OIL PAN) | ||
| 349-1527 Y | [1] | COVER GP-VALVE MECHANISM | ||
| 347-0608 Y | [1] | DAMPER & PULLEY GP | ||
| 345-6680 Y | [1] | DRIVE GP-FAN | ||
| 364-6374 Y | [1] | ELBOW GP-AIR INLET | ||
| 278-0244 Y | [1] | ELBOW GP-WATER | ||
| 485-9801 Y | [1] | ENGINE AR-CORE | ||
| 346-5148 Y | [1] | FASTENER GP-FUEL INJ PUMP | ||
| 348-1099 Y | [1] | FASTENER GP-WATER PUMP | ||
| 388-3570 Y | [1] | FILTER GP-FUEL | ||
| 319-8165 Y | [1] | FLYWHEEL GP | ||
| 345-0374 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE) | ||
| 344-2902 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 299-8022 Y | [1] | HOUSING GP-FRONT | ||
| 355-7364 Y | [1] | LIFTING GP-ENGINE | ||
| 434-3317 Y | [1] | LINES GP-AIR | ||
| 286-9679 Y | [1] | LINES GP-ENGINE OIL | ||
| 357-6365 Y | [1] | LINES GP-ENGINE OIL | ||
| 331-2758 Y | [1] | LINES GP-FUEL | ||
| 448-0226 Y | [1] | LINES GP-FUEL FILTER | ||
| 344-9397 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
| 423-4285 Y | [1] | LINES GP-WATER | ||
| 488-5102 Y | [1] | LINES GP-WATER | ||
| 343-0585 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 344-8267 Y | [1] | MANIFOLD GP-INLET | ||
| 344-0368 Y | [1] | MOUNTING GP-ALTERNATOR & COMPR | ||
| 367-7314 Y | [1] | MOUNTING GP-CONNECTOR (ENGINE) | ||
| 348-8371 Y | [1] | PAN GP-OIL | ||
| 275-4260 Y | [1] | PLUG GP-CYLINDER BLOCK (JACKET WATER HEATER) | ||
| 275-8699 Y | [1] | PLUG GP-CYLINDER BLOCK (AUXILIARY COOLER) | ||
| 495-5748 Y | [1] | PLUG GP-CYLINDER HEAD | ||
| Y | [1] | PLUG GP-ENGINE | ||
| 347-2324 Y | [1] | PLUG GP-WATER LINES | ||
| 342-7219 Y | [1] | PULLEY GP-CRANKSHAFT | ||
| 326-3561 Y | [1] | REGULATOR GP-TEMPERATURE | ||
| 295-2351 Y | [1] | SEAL GP-CRANKSHAFT | ||
| 349-4782 Y | [1] | SPACER GP-AIR INLET | ||
| 355-6044 Y | [1] | STARTING MOTOR GP-ELECTRIC | ||
| 346-9527 Y | [1] | SUPPORT GP-ENGINE | ||
| 486-0550 Y | [1] | TURBOCHARGER GP | ||
| 488-6384 Y | [1] | WIRING GP-ELECTRONIC CONTROL | ||
| 349-1502 Y | [1] | WIRING GP-ENGINE | ||
| 356-0811 Y | [1] | WIRING GP-SENSOR (ENGINE OIL LEVEL) | ||
| PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530042
516-4820: ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 371-1911 Y | [1] | ADAPTER GP-EXHAUST DIFFUSER | ||
| 345-1176 Y | [1] | ALTERNATOR GP-CHARGING | ||
| 344-5154 Y | [1] | BASE GP-OIL FILTER (REMOTE MOUNTED) | ||
| 327-3980 Y | [1] | BELT GP-SERPENTINE | ||
| 434-6486 Y | [1] | BRACKET GP-MOUNTING | ||
| 316-8988 Y | [1] | COMPRESSOR & MTG GP-REFRIG | ||
| 388-3539 Y | [1] | CONTROL & MTG GP-ENGINE ELEK (ENGINE CONTROL MODULE) | ||
| 394-8802 Y | [1] | CONTROL & MTG GP-ENGINE ELEK | ||
| 188-3826 Y | [1] | COOLER GP-ENGINE OIL | ||
| 424-5993 Y | [1] | COVER & MTG GP-CYLINDER BLOCK | ||
| 325-8452 Y | [1] | COVER GP-ENGINE | ||
| 127-5728 Y | [1] | COVER GP-FLYWHEEL HOUSING | ||
| 269-5311 Y | [1] | COVER GP-FRONT HOUSING (ENGINE OIL FILL) | ||
| 269-5325 Y | [1] | COVER GP-FRONT HOUSING (OPTIONAL EQUIPMENT) | ||
| 338-2640 Y | [1] | COVER GP-FRONT HOUSING | ||
| 350-1302 Y | [1] | COVER GP-SOUND SUPPRESSION (ENGINE OIL PAN) | ||
| 349-1527 Y | [1] | COVER GP-VALVE MECHANISM | ||
| 347-0608 Y | [1] | DAMPER & PULLEY GP | ||
| 345-6680 Y | [1] | DRIVE GP-FAN | ||
| 364-6374 Y | [1] | ELBOW GP-AIR INLET | ||
| 278-0244 Y | [1] | ELBOW GP-WATER | ||
| 485-9801 Y | [1] | ENGINE AR-CORE | ||
| 346-5148 Y | [1] | FASTENER GP-FUEL INJ PUMP | ||
| 348-1099 Y | [1] | FASTENER GP-WATER PUMP | ||
| 388-3570 Y | [1] | FILTER GP-FUEL | ||
| 319-8165 Y | [1] | FLYWHEEL GP | ||
| 345-0374 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
| 344-2902 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 299-8022 Y | [1] | HOUSING GP-FRONT | ||
| 355-7364 Y | [1] | LIFTING GP-ENGINE | ||
| 434-3317 Y | [1] | LINES GP-AIR | ||
| 286-9679 Y | [1] | LINES GP-ENGINE OIL | ||
| 357-6365 Y | [1] | LINES GP-ENGINE OIL | ||
| 331-2758 Y | [1] | LINES GP-FUEL | ||
| 448-0226 Y | [1] | LINES GP-FUEL FILTER | ||
| 344-9397 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
| 423-4285 Y | [1] | LINES GP-WATER | ||
| 488-5102 Y | [1] | LINES GP-WATER | ||
| 343-0585 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 344-8267 Y | [1] | MANIFOLD GP-INLET | ||
| 344-0368 Y | [1] | MOUNTING GP-ALTERNATOR & COMPR | ||
| 367-7314 Y | [1] | MOUNTING GP-CONNECTOR (ENGINE) | ||
| 348-8371 Y | [1] | PAN GP-OIL | ||
| 275-4260 Y | [1] | PLUG GP-CYLINDER BLOCK (JACKET WATER HEATER) | ||
| 275-8699 Y | [1] | PLUG GP-CYLINDER BLOCK (AUXILIARY COOLER) | ||
| 495-5748 Y | [1] | PLUG GP-CYLINDER HEAD | ||
| 347-2324 Y | [1] | PLUG GP-WATER LINES | ||
| Y | [1] | PLUG GP-ENGINE | ||
| 342-7219 Y | [1] | PULLEY GP-CRANKSHAFT | ||
| 326-3561 Y | [1] | REGULATOR GP-TEMPERATURE | ||
| 295-2351 Y | [1] | SEAL GP-CRANKSHAFT | ||
| 349-4782 Y | [1] | SPACER GP-AIR INLET | ||
| 355-6044 Y | [1] | STARTING MOTOR GP-ELECTRIC | ||
| 346-9527 Y | [1] | SUPPORT GP-ENGINE | ||
| 486-0550 Y | [1] | TURBOCHARGER GP | ||
| 488-6384 Y | [1] | WIRING GP-ELECTRONIC CONTROL | ||
| 349-1502 Y | [1] | WIRING GP-ENGINE | ||
| 356-0811 Y | [1] | WIRING GP-SENSOR (ENGINE OIL LEVEL) | ||
| PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530043
381-1732: ENGINE AR-CORE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 294-3593 Y | [1] | CAMSHAFT GP | ||
| 345-9941 Y | [1] | COOLER GP-EXHAUST (NRS) | ||
| 294-2987 Y | [1] | CRANKSHAFT GP | ||
| 277-7261 Y | [1] | CYLINDER BLOCK GP | ||
| 346-0485 Y | [1] | CYLINDER HEAD GP | ||
| 294-2931 Y | [1] | GEAR GP-FRONT | ||
| 370-0969 Y | [6] | PISTON & ROD GP | ||
| 259-2976 Y | [1] | PUMP GP-ENGINE OIL | ||
| 386-2109 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 376-3432 Y | [6] | PUMP GP-FUEL INJECTION | ||
| 346-9561 Y | [1] | PUMP GP-WATER | ||
| 344-9102 Y | [1] | LINES GP-FUEL INJECTION | ||
| 342-8959 Y | [1] | SENSOR GP-ENGINE | ||
| 347-9431 Y | [1] | VALVE & MOUNTING GP (NRS) | ||
| 348-9896 Y | [1] | VALVE MECHANISM GP | ||
| 343-9066 Y | [1] | WIRING GP-UNIT INJECTOR | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530044
485-9801: ENGINE AR-CORE
485-9801 ENGINE AR-CORE
S/N SYE1-UP
234 BRAKE KW (314 BHP) AT 1800-RPM
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
S/N SYE1-UP
234 BRAKE KW (314 BHP) AT 1800-RPM
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530045
520-6566: ENGINE AR-CORE
520-6566 ENGINE AR-CORE
S/N SYE1-UP
PART OF 373-3833 ENGINE AR, 485-9801 ENGINE AR-CORE
CANNOT BE USED WITH BRAKE
S/N SYE1-UP
PART OF 373-3833 ENGINE AR, 485-9801 ENGINE AR-CORE
CANNOT BE USED WITH BRAKE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 294-3593 Y | [1] | CAMSHAFT GP | ||
| 449-3099 Y | [1] | COOLER GP-EXHAUST (NRS) | ||
| 294-2987 Y | [1] | CRANKSHAFT GP | ||
| 277-7261 Y | [1] | CYLINDER BLOCK GP | ||
| 502-6504 Y | [1] | CYLINDER HEAD GP | ||
| 294-2931 Y | [1] | GEAR GP-FRONT | ||
| 437-7173 Y | [6] | PISTON & ROD GP | ||
| 259-2976 Y | [1] | PUMP GP-ENGINE OIL | ||
| 376-3432 Y | [6] | PUMP GP-FUEL INJECTION | ||
| 386-2109 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 346-9561 Y | [1] | PUMP GP-WATER | ||
| 344-9102 Y | [1] | LINES GP-FUEL INJECTION | ||
| 397-8790 Y | [1] | SENSOR GP-ENGINE | ||
| 347-9431 Y | [1] | VALVE & MOUNTING GP (NRS) | ||
| 348-9896 Y | [1] | VALVE MECHANISM GP | ||
| 343-9066 Y | [1] | WIRING GP-UNIT INJECTOR | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530046
368-8303: INSTALLATION AR-ENGINE
368-8303 INSTALLATION AR-ENGINE
S/N KFT1-UP; WTZ1-UP
PART OF 368-8301 ENGINE AR-COMPLETE
S/N KFT1-UP; WTZ1-UP
PART OF 368-8301 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 310-9641 Y | [1] | DRAIN GP-ENGINE OIL | ||
| 385-1332 Y | [1] | FILTER & MTG GP-ENGINE OIL | ||
| 385-1333 Y | [1] | FUMES DISPOSAL GP | ||
| 324-4304 Y | [1] | LINES GP-AIR | ||
| 368-8305 Y | [1] | LINES GP-FUEL | ||
| 310-9640 Y | [1] | MOUNTING GP-ENGINE | ||
| 382-8237 Y | [1] | TANK & MTG GP-FUEL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530047
381-2556: MODULE AR-ENGINE & CEM
381-2556 MODULE AR-ENGINE & CEM
S/N KFT1-UP; WTZ1-UP
PART OF 368-8301 ENGINE AR-COMPLETE
S/N KFT1-UP; WTZ1-UP
PART OF 368-8301 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 373-3834 Y | [1] | ENGINE AR-COMPLETE | ||
| -OR- | ||||
| 485-9800 Y | [1] | ENGINE AR-COMPLETE | ||
| -OR- | ||||
| 516-4820 Y | [1] | ENGINE AR-COMPLETE | ||
| 394-5352 Y | [1] | MODULE AR-CLEAN EMISSIONS | ||
| -OR- | ||||
| 469-6266 Y | [1] | MODULE AR-CLEAN EMISSIONS | ||
| 373-5561 Y | [1] | MODULE AR-DIESEL EXHAUST FLUID | ||
| -OR- | ||||
| 504-3097 Y | [1] | MODULE AR-DIESEL EXHAUST FLUID | ||
| 379-5064 Y | [1] | PIPE GP-FLEXIBLE EXHAUST | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530048
327-3980: BELT GP-SERPENTINE
327-3980 BELT GP-SERPENTINE
S/N SSE1-UP; SYE1-UP
PROVIDES ACCESSORY DRIVE BELT
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH RH SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR, LH SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR
CANNOT BE USED WITH NON-AIR CONDITIONED MACHINES
S/N SSE1-UP; SYE1-UP
PROVIDES ACCESSORY DRIVE BELT
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH RH SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR, LH SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR
CANNOT BE USED WITH NON-AIR CONDITIONED MACHINES
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 349-3353 | [1] | BELT-SERPENTINE |
#SEBP75530049
344-4056: BRACKET GP-MOUNTING
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-2104 | [1] | BRACKET | |
| 2. | 357-8276 | [1] | BRACKET AS | |
| 4F-2609 | [2] | DOWEL | ||
| 3. | 197-7481 M | [1] | STUD (M10X1.5X83-MM) | |
| 4. | 5L-2087 | [1] | SPACER (9.25X13.72X50.8-MM THK) | |
| 5. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
| 6. | 6V-4249 M | [1] | BOLT (M10X1.5X50-MM) | |
| 7. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 8. | 6V-5221 M | [1] | BOLT (M8X1.25X80-MM) | |
| 9. | 6V-5839 | [3] | WASHER (11X21X2.5-MM THK) | |
| 10. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Operation and Maintenance Manual
Special Instruction
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Obtain and Upload a Warranty Report File for C4.4 through C32 Tier 4 Interim Engines {0336, 7772}
Instructions to Obtain and Upload a Warranty Report File for C4.4 through C32 Tier 4 Interim Engines {0336, 7772}
Instructions to Obtain and Upload a Warranty Report File for C4.4 through C32 Tier 4 Interim Engines {0336, 7772}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Systems Operation
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Testing and Adjusting
Technical Analysis
336F Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
336F Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
336F Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Troubleshooting
Disassembly and Assembly
Service Magazine
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
New Software is Now Used on Certain C9.3 through C18 Tier 4 Final Machine Engines {1000, 108U, 7620}
New Software is Now Used on Certain C9.3 through C18 Tier 4 Final Machine Engines {1000, 108U, 7620}
New Software is Now Used on Certain C9.3 through C18 Tier 4 Final Machine Engines {1000, 108U, 7620}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
