BASIC ENGINE
GEAR GPHOUSING GP-FLYWHEEL
GEAR GP
HOUSING GP-FRONT
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSBASIC ENGINE
LIFTING GP-ENGINECOMPRESSOR GP-REFRIGERANT
MOUNTING GP-ENGINE
PAN GP-OIL
BASIC ENGINE
GEAR GP
#SEBP75530080
294-2931: GEAR GP-FRONT
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530081
344-2902: HOUSING GP-FLYWHEEL
344-2902 HOUSING GP-FLYWHEEL
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-1445 | [1] | COVER | |
| 2. | 422-0186 | [1] | HOUSING-FLYWHEEL | |
| 3. | 061-9455 | [1] | SEAL-O-RING | |
| 4. | 6V-1176 | [1] | PLUG-DRAIN (MAGNETIC) | |
| 5. | 389-3728 | [1] | PLUG AS | |
| 238-5084 | [1] | SEAL-O-RING | ||
| 360-3684 | [1] | PLUG | ||
| 6. | 371-7186 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 214-7567 | [1] | SEAL-O-RING | ||
| 360-3678 | [1] | PLUG-O-RING | ||
| 7. | 5P-8245 | [14] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 9. | 6V-8197 M | [14] | BOLT (M12X1.75X40-MM) | |
| 10. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 106-1565 | [1] | PLUG | |
| 12. | 3B-1925 | [1] | WASHER (0.766X1X0.064-IN THK) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP75530082
299-8022: HOUSING GP-FRONT
299-8022 HOUSING GP-FRONT
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 296-7523 | [1] | HOUSING-FRONT | |
| 288-5726 | [1] | SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) | ||
| 2. | 6V-5217 M | [8] | BOLT (M8X1.25X20-MM) | |
| 3. | 6V-3918 M | [4] | BOLT (M8X1.25X50-MM) | |
| 4. | 9M-1974 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP75530083
455-1697: KIT-FRONT COVER GASKET
455-1697 KIT-FRONT COVER GASKET
S/N KFT1-UP; WTZ1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@373-3834@@@@@
FIELD INSTALLATION
S/N KFT1-UP; WTZ1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@373-3834@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4R-9999 | [1] | EXCLUDER-CRANKSHAFT SEAL | ||
| 258-5646 | [1] | GASKET | ||
| 275-2164 | [1] | SEAL | ||
| 288-5726 | [1] | SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) | ||
| 6V-3250 | [1] | SEAL-O-RING | ||
| 6V-5063 | [1] | SEAL-O-RING | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 6V-8260 | [1] | SEAL-O-RING | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 228-4947 | [2] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP75530084
458-9490: KIT-REAR COVER GASKET
458-9490 KIT-REAR COVER GASKET
S/N KFT1-UP; WTZ1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@373-3834@@@@@
FIELD INSTALLATION
S/N KFT1-UP; WTZ1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@373-3834@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9Y-6089 | [2] | GASKET | ||
| 528-5684 | [1] | SEAL GP-CRANKSHAFT | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 214-7567 | [2] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP75530085
355-7364: LIFTING GP-ENGINE
355-7364 LIFTING GP-ENGINE
S/N SSE1-UP; SYE1-UP
PROVIDES FRONT AND REAR LIFTING EYES
PART OF 373-3834 ENGINE AR-COMPLETE
S/N SSE1-UP; SYE1-UP
PROVIDES FRONT AND REAR LIFTING EYES
PART OF 373-3834 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530086
355-7364: LIFTING GP-ENGINE
355-7364 LIFTING GP-ENGINE
S/N SYE1-UP
PROVIDES FRONT AND REAR LIFTING EYES
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
S/N SYE1-UP
PROVIDES FRONT AND REAR LIFTING EYES
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530087
344-0368: MOUNTING GP-ALTERNATOR & COMPR
344-0368 MOUNTING GP-ALTERNATOR & COMPR
S/N SSE1-UP; SYE1-UP
PROVIDES ALTERNATOR AND AIR CONDITIONING COMPRESSOR MOUNTING GP LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE, INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATORS AND COMPRESSORS
CANNOT BE USED WITH HINGE MOUNTED ALTERNATORS AND COMPRESSORS
S/N SSE1-UP; SYE1-UP
PROVIDES ALTERNATOR AND AIR CONDITIONING COMPRESSOR MOUNTING GP LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE, INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATORS AND COMPRESSORS
CANNOT BE USED WITH HINGE MOUNTED ALTERNATORS AND COMPRESSORS
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 243-2310 W | [1] | COVER | |
| 2. | 279-2589 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 3. | 333-1207 J | [1] | IDLER AS | |
| 4. | 344-0369 | [1] | SUPPORT AS | |
| 332-9270 | [2] | BUSHING | ||
| 344-0370 | [1] | BRACKET-SUPPORT | ||
| 5. | 347-7963 | [1] | TENSIONER-BELT | |
| 6. | 6V-4249 M | [6] | BOLT (M10X1.5X50-MM) | |
| 7. | 6V-5839 | [7] | WASHER (11X21X2.5-MM THK) | |
| 8. | 8T-0644 M | [1] | BOLT (M10X1.5X90-MM) | |
| J | PART MARKED J HAS INTEGRATED COVER BUILT INTO IT, DOES NOT USE 243-2310 | |||
| M | METRIC PART | |||
| W | PART MARKED W IS USED WITH NON-SERVICED IDLER 334-3353 ONLY | |||
#SEBP75530088
310-9640: MOUNTING GP-ENGINE
310-9640 MOUNTING GP-ENGINE
S/N KFT1-UP; WTZ1-UP
PART OF 368-8303 INSTALLATION AR-ENGINE
S/N KFT1-UP; WTZ1-UP
PART OF 368-8303 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-9329 | [2] | WASHER (21.5X120X8-MM THK) | |
| 2. | 109-9437 | [2] | WASHER (24.5X135X12-MM THK) | |
| 3. | 118-9930 | [1] | SUPPORT AS | |
| 451-2184 M | [1] | NUT (M20X2.5-THD) | ||
| 4. | 139-8736 | [2] | MOUNT-FLEXIBLE (LOWER) | |
| 5. | 139-8737 | [2] | MOUNT-FLEXIBLE (UPPER) | |
| 6. | 139-8873 M | [2] | SUPPORT AS | |
| (EACH INCLUDES) | ||||
| 451-2185 M | [1] | NUT (M24X3-THD) | ||
| 7. | 266-6298 | [2] | MOUNT-RUBBER (LOWER) | |
| 8. | 266-6299 | [2] | MOUNT-RUBBER (UPPER) | |
| 9. | 368-6679 | [1] | SUPPORT AS | |
| 10. | 324-4394 | [1] | BRACKET AS | |
| 11. | 324-4397 | [1] | BRACKET AS | |
| 12. | 447-1712 M | [2] | BOLT (M20X2.5X130-MM) | |
| 13. | 447-1721 M | [2] | BOLT (M24X3X160-MM) | |
| 14. | 451-2188 | [2] | WASHER-HARD (26X50X8-MM THK) | |
| 15. | 451-2176 | [4] | WASHER-HARD (22X35X3.5-MM THK) | |
| 16. | 451-2177 | [2] | WASHER-HARD (26X44X4-MM THK) | |
| 17. | 447-1709 M | [8] | BOLT (M16X2X45-MM) | |
| 18. | 451-2175 | [8] | WASHER-HARD (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
#SEBP75530089
348-8371: PAN GP-OIL
348-8371 PAN GP-OIL
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 392-0775 | [2] | PLUG AS-DRAIN (ENGINE OIL PAN) | |
| (EACH INCLUDES) | ||||
| 9X-6451 | [1] | PLUG-DRAIN (MAGNETIC)(ENGINE OIL) | ||
| 279-2252 | [1] | SEAL-O-RING | ||
| 2. | 190-6114 | [1] | GASKET-OIL PAN | |
| 3. | 348-8373 | [1] | PAN-OIL | |
| 4. | 351-0283 | [1] | VALVE AS-SHUTOFF (ENGINE OIL DRAIN) | |
| 6V-7238 | [1] | VALVE-SHUTOFF | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 5. | 9M-1974 | [32] | WASHER-HARD (8.8X16X2-MM THK) | |
| 6. | 6V-3918 M | [24] | BOLT (M8X1.25X50-MM) | |
| 7. | 389-3728 | [1] | PLUG AS | |
| 234-5084 I | [1] | HOSE AS | ||
| 360-3684 | [1] | PLUG | ||
| 8. | 329-3706 | [8] | STUD (M8X1.25X42.25-MM, 22.00-MM) | |
| 9. | 363-8107 | [1] | ADAPTER AS | |
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| 4C-9612 BF | SEALANT-SILICONE | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
Information:
BASIC ENGINE
GEAR GP
Specifications
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
