BASIC ENGINE
PISTON & ROD GPCYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
PULLEY GP
BASIC ENGINE
PISTON & ROD GP#SEBP75530090
370-0969: PISTON & ROD GP
370-0969 PISTON & ROD GP
S/N SSE1-UP; SYE1-UP
17.0:1 COMPRESSION RATIO
PART OF 381-1732 ENGINE AR-CORE
S/N SSE1-UP; SYE1-UP
17.0:1 COMPRESSION RATIO
PART OF 381-1732 ENGINE AR-CORE
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 524-5566 | [1] | PIN-PISTON | |
2. | 256-9658 | [1] | ROD AS-CONNECTING | |
[1] | BUSHING | |||
160-8197 M | [2] | BOLT (M12X1.25X62-MM) | ||
3. | 471-0275 | [1] | RING-PISTON (INTERMEDIATE) | |
4. | 262-2891 | [1] | RING-PISTON (OIL) | |
5. | 269-7290 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
282-2478 AB | BEARING-CONNECTING ROD (0.25-MM US) | |||
282-2479 AB | BEARING-CONNECTING ROD (0.51-MM US) | |||
6. | 273-2600 | [1] | TUBE AS-OIL JET | |
7. | 300-1319 | [1] | RING-PISTON (TOP) | |
8. | 369-5326 | [1] | BODY AS-PISTON | |
9. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
10. | 6V-5589 | [2] | RING-RETAINING | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP75530091
437-7173: PISTON & ROD GP
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 524-5566 | [1] | PIN-PISTON | |
2. | 490-8380 | [1] | ROD AS-CONNECTING | |
160-8197 M | [2] | BOLT (M12X1.25X62-MM) | ||
3. | 262-2891 | [1] | RING-PISTON | |
4. | 269-7290 | [1] | BEARING-CONNECTING ROD | |
5. | 273-2600 | [1] | TUBE AS-OIL JET | |
6. | 437-7099 | [1] | BODY AS-PISTON | |
7. | 467-1177 | [1] | RING-PISTON | |
8. | 447-5626 | [1] | RING-PISTON | |
9. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
10. | 6V-5589 | [2] | RING-RETAINING | |
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP75530092
275-4260: PLUG GP-CYLINDER BLOCK
275-4260 PLUG GP-CYLINDER BLOCK
S/N SSE1-UP; SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER
S/N SSE1-UP; SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530093
275-8699: PLUG GP-CYLINDER BLOCK
275-8699 PLUG GP-CYLINDER BLOCK
S/N SSE1-UP; SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER
S/N SSE1-UP; SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530094
346-4997: PLUG GP-CYLINDER HEAD
346-4997 PLUG GP-CYLINDER HEAD
S/N SSE1-UP; SYE1-UP
PART OF 373-3834 ENGINE AR-COMPLETE
CANNOT BE USED WITH AIR COMPRESSOR GROUPS
S/N SSE1-UP; SYE1-UP
PART OF 373-3834 ENGINE AR-COMPLETE
CANNOT BE USED WITH AIR COMPRESSOR GROUPS
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530095
350-0195: PLUG GP-CYLINDER HEAD
350-0195 PLUG GP-CYLINDER HEAD
S/N SYE1-UP
PART OF 373-3834 ENGINE AR-COMPLETE
FOR USE WITH WATER COOLED TURBO
CANNOT BE USED WITH AIR COMPRESSOR GP
S/N SYE1-UP
PART OF 373-3834 ENGINE AR-COMPLETE
FOR USE WITH WATER COOLED TURBO
CANNOT BE USED WITH AIR COMPRESSOR GP
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530096
495-5748: PLUG GP-CYLINDER HEAD
495-5748 PLUG GP-CYLINDER HEAD
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
#SEBP75530097
292-9786: PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE -COMPRESSION BRAKE
S/N SSE1-UP; SYE1-UP
PROVIDES A PLUG GP FOR COMPRESSION BRAKE OIL SUPPLY WHEN COMPRESSION BRAKE IS NOT USED
PART OF 373-3834 ENGINE AR-COMPLETE
S/N SSE1-UP; SYE1-UP
PROVIDES A PLUG GP FOR COMPRESSION BRAKE OIL SUPPLY WHEN COMPRESSION BRAKE IS NOT USED
PART OF 373-3834 ENGINE AR-COMPLETE
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530098
492-4471: PLUG GP-ENGINE
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SIS#SEBP75530099
342-7219: PULLEY GP-CRANKSHAFT
342-7219 PULLEY GP-CRANKSHAFT
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED CEM
S/N SSE1-UP; SYE1-UP
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED CEM
Parts for your 336F LN EXCAVATOR:
CATERPILLAR SISInformation:
BASIC ENGINE
PISTON & ROD GP
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Disassembly and Assembly