ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AID GP
STARTING MOTOR GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP75530390
344-1211: SENSOR GP-PRESSURE
344-1211 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 415-2405 MANIFOLD GP-INLET
S/N KFT1-UP; WTZ1-UP
PART OF 415-2405 MANIFOLD GP-INLET
For full view, you need register
#SEBP75530391
354-4378: SENSOR GP-PRESSURE
354-4378 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 349-2307, 349-2309 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N KFT1-UP; WTZ1-UP
PART OF 480-6106, 480-6108 CAB AR, 349-2307, 349-2309 CONTROL AR-AUXILIARY
AN ATTACHMENT
For full view, you need register
#SEBP75530392
385-1173: SENSOR GP-PRESSURE
385-1173 SENSOR GP-PRESSURE
S/N SSE1-UP; SYE1-UP
NRS DIFFERENTIAL
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE
S/N SSE1-UP; SYE1-UP
NRS DIFFERENTIAL
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 341-0643 | [2] | SEAL-RECTANGULAR |
#SEBP75530393
398-3755: SENSOR GP-PRESSURE
398-3755 SENSOR GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 416-4729 SENSOR & MTG GP-PRESSURE
S/N KFT1-UP; WTZ1-UP
PART OF 416-4729 SENSOR & MTG GP-PRESSURE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
#SEBP75530394
236-6221: SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED -ENGINE TIMING
S/N SSE1-UP; SYE1-UP
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE
S/N SSE1-UP; SYE1-UP
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE
For full view, you need register
#SEBP75530395
234-5012: SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
S/N SSE1-UP; SYE1-UP
AMPSEAL CONNECTOR
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE
S/N SSE1-UP; SYE1-UP
AMPSEAL CONNECTOR
PART OF 342-8959, 397-8790 SENSOR GP-ENGINE
For full view, you need register
#SEBP75530396
234-5013: SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
S/N SSE1-UP; SYE1-UP
PART OF 349-4570 BASE GP-FUEL FILTER, 342-8959, 397-8790 SENSOR GP-ENGINE
S/N SSE1-UP; SYE1-UP
PART OF 349-4570 BASE GP-FUEL FILTER, 342-8959, 397-8790 SENSOR GP-ENGINE
For full view, you need register
#SEBP75530397
324-4376: STARTING AID GP-ETHER
324-4376 STARTING AID GP-ETHER
S/N KFT1-UP; WTZ1-UP
PART OF 448-8850, 454-5613 OPTION AR-REGIONAL
AN ATTACHMENT
S/N KFT1-UP; WTZ1-UP
PART OF 448-8850, 454-5613 OPTION AR-REGIONAL
AN ATTACHMENT
For full view, you need register
Parts for your 336F LN EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 2. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 3. | 241-4194 | [1] | FITTING AS (CONTROL) | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 4. | 351-4237 | [1] | PLATE AS | |
| 5. | 352-0399 | [1] | ATOMIZER GP-ETHER | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 9. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 174-9169 E | TUBE (40-CM) | ||
| 7N-0296 A | [1] | CYLINDER AS-ETHER | ||
| (MUST BE PROCURRED LOCALLY FROM YOUR CAT DEALER) | ||||
| -OR- | ||||
| 9G-8211 AJ | [1] | CYLINDER AS-ETHER | ||
| (MUST BE PROCURRED LOCALLY FROM YOUR CAT DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| E | ORDER BY THE CENTIMETER | |||
| J | FOR JAPAN MARKET ONLY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530398
349-6536: STARTING MOTOR GP-ELECTRIC
349-6536 STARTING MOTOR GP-ELECTRIC
S/N SSE1-UP; SYE1-UP
24-VOLT
PART OF 355-6044 STARTING MOTOR GP-ELECTRIC
S/N SSE1-UP; SYE1-UP
24-VOLT
PART OF 355-6044 STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your 336F LN EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-0326 | [1] | CONNECTOR | |
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
| 4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
| 5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 3T-3423 | [1] | CUP | ||
| 3T-3424 | [1] | PLUG-FELT | ||
| 9G-4101 | [1] | BUSHING-END | ||
| 8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS | |
| 11. | 2J-8163 | [2] | SEAL-O-RING | |
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 14. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 15. | 8C-3089 | [1] | SEAL-O-RING | |
| 16. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 17. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 18. | 7L-2894 | [4] | GASKET | |
| 19. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 20. | 4M-1854 | [1] | SHAFT-LEVER | |
| 21. | 1H-1023 | [1] | SEAL-O-RING | |
| 22. | 2D-6392 | [1] | SEAL-O-RING | |
| 23. | 528-6787 | [1] | HOUSING AS-DRIVE | |
| 24. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 25. | 2H-3429 | [1] | RING-RETAINING | |
| 26. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 27. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 28. | 6N-3279 | [1] | INSULATOR | |
| 29. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 30. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
| 31. | 1H-2629 | [3] | STRIP-INSULATION | |
| 32. | 7M-0324 | [1] | COIL AS-FIELD | |
| 33. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 34. | 7F-3488 | [6] | SHOE-POLE | |
| 35. | 7M-8651 | [1] | ARMATURE AS | |
| 36. | 7M-0325 | [1] | INSULATOR | |
| 37. | 3T-9524 | [6] | BRUSH AS | |
| 38. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| (INCLUDES BUSHINGS & WASHERS) | ||||
| 40. | 3R-8801 | [1] | CLAMP | |
| 41. | 8F-1434 | [2] | LOCKWASHER | |
| 42. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 43. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 44. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 45. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 46. | 3T-9494 | [6] | SPRING | |
| 47. | 349-6255 | [1] | HOUSING AS | |
| 48. | 9G-4101 | [1] | BUSHING-END | |
| 49. | 3T-3424 | [3] | PLUG-FELT | |
| 50. | 3T-3423 | [3] | CUP | |
| 51. | 1M-9968 | [1] | BUSHING | |
| 53. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 54. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 55. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| 56. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 57. | 338-3453 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 3R-8801 | [1] | CLAMP | ||
| 58. | 352-7993 | [1] | KIT-SWITCH | |
| (INCLUDES SWITCH AS, COVER, BOLTS, ANCHOR & CLAMP) | ||||
| 59. | 351-8955 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75530399
355-6044: STARTING MOTOR GP-ELECTRIC
355-6044 STARTING MOTOR GP-ELECTRIC
S/N SSE1-UP; SYE1-UP
24-VOLT, 50-MT. LEFT HAND STARTER CONFIGURATION WITH A MAG SWITCH
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
S/N SSE1-UP; SYE1-UP
24-VOLT, 50-MT. LEFT HAND STARTER CONFIGURATION WITH A MAG SWITCH
PART OF 373-3834, 485-9800, 516-4820 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 336F LN EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 170-9328 | [1] | STRAP AS-GROUND | |
| 3. | 349-6536 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 4. | 355-1642 Y | [1] | HARNESS AS-SWITCH | |
| 5. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 8. | 7K-1181 | [1] | STRAP-CABLE | |
| 9. | 3S-2093 | [2] | STRAP-CABLE | |
| 10. | 309-5734 | [1] | SPACER (10.8X17.3X12-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Instructions for Installing Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
Machine Guidance Upgrades For Cat<SUP>®</SUP> Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Installation Procedure for the 452-1782 Auxiliary Control Ar on Certain Hydraulic Excavators{1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 7405, 7557}
Installation Procedure for the 452-1782 Auxiliary Control Ar on Certain Hydraulic Excavators{1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 7405, 7557}
Installation Procedure for the 452-1782 Auxiliary Control Ar on Certain Hydraulic Excavators{1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 7405, 7557}
Installation Procedure for the <NOBR>452-1787</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5705, 7301, 7405, 7557}
Installation Procedure for the452-1787 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5705, 7301, 7405, 7557}
Installation Procedure for the
Installation Procedure for the 486-8676 Control Ar - Auxiliary on Certain Hydraulic Excavators{1408, 1439, 5057, 5059, 5705, 7301, 7405, 7557}
Installation Procedure for the 486-8676 Control Ar - Auxiliary on Certain Hydraulic Excavators{1408, 1439, 5057, 5059, 5705, 7301, 7405, 7557}
Installation Procedure for the 486-8676 Control Ar - Auxiliary on Certain Hydraulic Excavators{1408, 1439, 5057, 5059, 5705, 7301, 7405, 7557}
Troubleshooting Guide for the Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Specifications
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
Service Letter-Asia
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
Troubleshooting
Sensor Signal (Analog, Passive) - Test
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit
336F and 340F Excavators and 336F MHPU Mobile Hydraulic Power Unit
Disassembly and Assembly
Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement
336F and 340F Excavators Engine Supplement
Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement
336F and 340F Excavators Engine Supplement
Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement
336F and 340F Excavators Engine Supplement
Temperature Sensor (Catalyst Inlet) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Pressure Sensor (ARD Combustion Air) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Soot Sensor - Remove and Install - Clean Emissions Module
336F and 340F Excavators Engine Supplement
336F and 340F Excavators Engine Supplement
Service Magazine
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
