481-5331 WIRING GP-MEDIUM PRESSURE S/N SFG1-UP; RAX1-UP PART OF 461-3661 CONTROL AR-AUXILIARY 349F LXE

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 481-5331 WIRING GP-
1. 377-8214 WIRING GP-
2. 349-6154 WIRING GP-
3. 345-6734 WIRING GP-
4. 460-0860 WIRING GP-
5. 460-0861 WIRING GP-
6. 489-0499 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

7. 460-4988 DRIVE GP-F
8. 480-7428 DRIVE GP-F
9. 480-7429 DRIVE GP-F
0. INFORMATION

EXCAVATOR 349F LXE EXCAVATOR RAX
349F LXE Excavators RAX00001-UP (MACHINE) POWERED BY C13 Engine SEBP7559 349F LXE RAX (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

527-0834 WIRING GP-FRONT

527-0835 WIRING GP-FRONT

481-5331 WIRING GP-MEDIUM PRESSURE

377-8214 WIRING GP-PLATFORM

349-6154 WIRING GP-SENSOR

345-6734 WIRING GP-UNIT INJECTOR

#SEBP75590510

481-5331: WIRING GP-MEDIUM PRESSURE

WIRING GP-MEDIUM PRESSURE

481-5331 WIRING GP-MEDIUM PRESSURE
S/N SFG1-UP; RAX1-UP
PART OF 461-3661 CONTROL AR-AUXILIARY

i06139728 SEBP7559

4815331 WIRING GP-MEDIUM PRESSURE Parts scheme

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	7K-1181	[11]	STRAP-CABLE
3.	479-7764	[1]	HARNESS AS-CHASSIS
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[9]	PLUG-SEAL
	125-7874	[5]	TUBE-HEAT SHRINK (5.72-MM DIA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	455-0709	[1]	SEAL-CONNECTOR
4.	132-5789	[1]	CLIP (LADDER)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP75590511

377-8214: WIRING GP-PLATFORM

WIRING GP-PLATFORM

377-8214 WIRING GP-PLATFORM
S/N SFG1-UP; RAX1-UP
PART OF 458-8306 CONTROL & MONITOR GP-CAB

i05167362 SEBP7559

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[7]	STRAP-CABLE
3.	6S-4039	[1]	GROMMET
4.	7G-1060	[1]	STRAP AS-GROUND
5.	7K-1181	[5]	STRAP-CABLE
6.	111-4836	[7]	CLIP
7.	111-4837	[1]	CLIP
8.	116-0118	[4]	CLIP
9.	234-1122	[1]	COVER
10.	301-2981	[1]	SWITCH AS-TOGGLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	112-4550 E		SLEEVE (19-CM)
	271-2178	[1]	SWITCH AS-TOGGLE (SECONDARY SHUTDOWN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
11.	319-1260	[2]	PANEL
12.	328-0077	[2]	CAP
13.	328-0119	[1]	SHEET
14.	377-8268	[1]	HARNESS AS-PLATFORM
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[8]	STRAP-CABLE
	8T-8737	[9]	PLUG-SEAL
	9W-0852	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	9X-3402	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[14]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	237-0227	[3]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	328-0076	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	342-2973	[2]	CAP-CONNECTOR (3-PIN)
	342-2978	[1]	CAP-CONNECTOR (4-PIN)
15.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
16.	132-5789	[3]	CLIP (LADDER)
17.	7X-2621 M	[4]	BOLT (M10X1.5X12-MM)
18.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
19.	8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
21.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
22.	8T-4191 M	[5]	BOLT (M10X1.5X16-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP75590512

349-6154: WIRING GP-SENSOR

WIRING GP-SENSOR

349-6154 WIRING GP-SENSOR
S/N T4F637-UP
PROVIDE A WIRING GROUP WITH COOLANT TEMPERATURE HARNESS
PART OF 373-3860, 476-6375, 516-8126 ENGINE AR-COMPLETE
FOR USE WITH EXTERNAL HARNESS

i04292141 SEBP7559

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	290-1993	[2]	STRAP-CABLE
2.	349-7699	[1]	BRACKET
3.	101-3129 M	[1]	STUD (M10X1.5-THD)
4.	362-1505 Y	[1]	HARNESS AS-SENSOR (COOLANT TEMPERATURE)
5.	4P-7581	[1]	CLIP (LADDER)
6.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
7.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
8.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP75590513

345-6734: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

345-6734 WIRING GP-UNIT INJECTOR
S/N T4F637-UP
PROVIDES A WIRING GP TO OPERATE MEUI-C INJECTORS. ALSO CONTAINS COOLANT TEMP PASS THROUGH WIRES.
PART OF 373-3860, 476-6375, 516-8126 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH BRAKES AND/OR IVA

i04292142 SEBP7559

3456734 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	418-2031 Y	[1]	HARNESS AS-ENGINE
2.	208-9277 M	[3]	BOLT-FLANGE HEAD (M6X1X20-MM)
3.	359-4892	[1]	RING-RETAINING
4.	359-4893	[1]	RING-RETAINING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP75590514

460-0860: WIRING GP-VALVE

WIRING GP-VALVE

460-0860 WIRING GP-VALVE
S/N SFG1-UP; RAX1-UP
PART OF 457-5960, 459-1160 VALVE AR-MAIN CONTROL, 460-0861 WIRING GP-VALVE

i06140610 SEBP7559

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[12]	STRAP-CABLE
2.	134-3771	[4]	SPACER (12.52X17.14X114-MM THK)
3.	274-3780	[2]	CAP-SEAL
4.	357-8318	[1]	HARNESS AS-VALVE
	7K-1181	[4]	STRAP-CABLE
	233-2106	[4]	COLLAR
	5P-6006 D		TUBE-HEAT SHRINK (9.52-MM DIA)(1.9-M)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(5.2-M)
	8T-8737	[73]	PLUG-SEAL
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	9X-3402	[149]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[149]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	134-2540	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	9X-3401	[27]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[27]	PIN-CONNECTOR (14-GA TO 16-GA)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES WEDGES, PLUG AS & INTERFACE SEAL)
	230-4009	[4]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4010	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	230-4011	[22]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[9]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	231-2296	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	231-2297	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	231-2298	[2]	PLUG AS
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	272-5000	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	329-3734		TAPE-ELECTRICAL
5.	440-4784	[1]	BRACKET AS
	361-5420	[3]	CLIP
		[1]	BRACKET
6.	132-5789	[3]	CLIP (LADDER)
7.	233-2106	[2]	COLLAR
8.	294-4826 M	[4]	BOLT-SOCKET HEAD (M8X1.25X80-MM)
9.	352-3964	[1]	CLIP (LADDER)
10.	352-3971	[1]	CLIP
11.	352-3968	[1]	CLIP (LADDER)
12.	4P-7581	[2]	CLIP (LADDER)
13.	4P-8134	[1]	CLIP (LADDER)
14.	7X-0457 M	[4]	BOLT (M8X1.25X130-MM)
15.	7X-2536 M	[8]	BOLT (M8X1.25X14-MM)
16.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4177 M	[2]	BOLT (M8X1.25X90-MM)
18.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
19.	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
20.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
21.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	8T-4224	[18]	WASHER-HARD (8.8X16X2-MM THK)
23.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP75590515

460-0861: WIRING GP-VALVE

WIRING GP-VALVE

460-0861 WIRING GP-VALVE
S/N SFG1-UP; RAX1-UP
PART OF 457-5970, 459-1170 VALVE AR-MAIN CONTROL

i06140593 SEBP7559

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[12]	STRAP-CABLE
2.	352-2616	[1]	HARNESS AS-VALVE
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-4010	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	230-4011	[4]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
3.	460-0860 Y	[1]	WIRING GP-VALVE
4.	132-5789	[4]	CLIP (LADDER)
5.	4P-7582	[1]	CLIP (LADDER)
6.	4P-8134	[1]	CLIP (LADDER)
7.	7X-2536 M	[4]	BOLT (M8X1.25X14-MM)
8.	7X-2552 M	[1]	BOLT (M16X2X30-MM)
9.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
10.	9X-8257	[1]	WASHER (17.5X30X3.5-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP75590516

489-0499: WIRING GP-VALVE

WIRING GP-VALVE

489-0499 WIRING GP-VALVE
S/N SFG1-UP; RAX1-UP
PART OF 489-0508 CONTROL AR-AUXILIARY

i06802744 SEBP7559

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[12]	STRAP-CABLE
2.	352-2616 Y	[1]	HARNESS AS-VALVE
3.	132-5789	[4]	CLIP (LADDER)
4.	4P-7582	[1]	CLIP (LADDER)
5.	4P-8134	[1]	CLIP (LADDER)
6.	7X-2536 M	[4]	BOLT (M8X1.25X14-MM)
7.	7X-2552 M	[1]	BOLT (M16X2X30-MM)
8.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
9.	9X-8257	[1]	WASHER (17.5X30X3.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP75590517

460-4988: DRIVE GP-FINAL

DRIVE GP-FINAL

460-4988 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N SFG1-UP; RAX1-UP
PART OF 353-0525 FASTENER GP-FINAL DRIVE

i06578138 SEBP7559

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-6399 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	480-7428 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

#SEBP75590518

480-7428: DRIVE GP-FINAL

DRIVE GP-FINAL

480-7428 DRIVE GP-FINAL -WITH MOTOR
S/N SFG1-UP; RAX1-UP
PART OF 460-4988 DRIVE GP-FINAL

i06710118 SEBP7559

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	417-7195 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	480-7429 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP75590519

480-7429: DRIVE GP-FINAL

DRIVE GP-FINAL

480-7429 DRIVE GP-FINAL -WITHOUT MOTOR
S/N SFG1-UP; RAX1-UP
PART OF 480-7428 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@504-1674@@@@@, @@@@@518-1212@@@@@

i06710183 SEBP7559

For full view, you need register

Parts for your 349F LXE EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-0525	[2]	CUP-BEARING
2.	7Y-0667	[2]	RING-RETAINING
3.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
4.	7Y-1469	[1]	COUPLING
5.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
6.	7Y-1473 B	[1]	SHIM (0.3-MM THK)
7.	7Y-1474 B	[1]	SHIM (0.4-MM THK)
8.	7Y-1475 B	[1]	SHIM (0.5-MM THK)
9.	7Y-1476 B	[1]	SHIM (0.6-MM THK)
10.	7Y-1477 B	[1]	SHIM (0.7-MM THK)
11.	7Y-1478 B	[1]	SHIM (0.8-MM THK)
12.	7Y-1479 B	[1]	SHIM (1-MM THK)
13.	7Y-1480 B	[1]	SHIM (1.6-MM THK)
14.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
15.	114-1541	[6]	PIN-DOWEL
16.	136-2898	[14]	WASHER (58.3X89X1-MM THK)
17.	191-2690	[6]	WASHER (42.3X70X1-MM THK)
18.	199-4719	[1]	GEAR-COUPLING
19.	227-6048	[12]	WASHER (26X40X4-MM THK)
20.	255-2272	[1]	SEAL GP-DUO-CONE
	205-9114	[2]	RING-TORIC
21.	296-6185	[4]	SHAFT (PLANET)
22.	296-6195	[3]	SHAFT (PLANET)
23.	296-6248	[3]	BEARING AS-ROLLER
24.	333-2927	[1]	GEAR-SUN (18-TEETH)
25.	333-2928	[1]	GEAR-SUN (21-TEETH)
26.	333-2929	[1]	GEAR-SUN (21-TEETH)
27.	333-2930	[3]	GEAR-PLANETARY (21-TEETH)
28.	333-2931	[3]	GEAR-PLANETARY (20-TEETH)
29.	333-2932	[4]	GEAR-PLANETARY (20-TEETH)
30.	333-2936	[1]	CARRIER AS
31.	333-2938	[1]	CARRIER-PLANETARY
32.	333-2939	[1]	CARRIER-PLANETARY
33.	333-2942	[1]	SPACER (183X209.6X8.5-MM THK)
34.	480-7403	[1]	COVER
35.	333-2960	[1]	GEAR-RING
36.	333-3033	[1]	HOUSING-MOTOR
37.	333-3035	[1]	PLATE
38.	346-5216	[11]	BEARING-NEEDLE
39.	346-5556	[2]	CONE-BEARING
40.	353-0605	[1]	HOUSING-GEAR
41.	451-2176	[28]	WASHER-HARD (22X35X3.5-MM THK)
42.	451-2182	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
43.	143-0811 M	[20]	BOLT (12X1.75X35-MM)
44.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
45.	096-8058	[3]	RING-RETAINING
46.	238-6588	[7]	PIN-SPRING
47.	3E-2338	[2]	PLUG-PIPE
48.	4S-5924	[1]	SEAL-O-RING
49.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
50.	6V-8200 M	[20]	BOLT-SOCKET HEAD (M12X1.75X35-MM)
51.	7M-8485	[2]	SEAL-O-RING
52.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
53.	7Y-5217 M	[28]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
54.	8C-5240	[1]	SEAL-O-RING
55.	5P-8245	[20]	WASHER-HARD (13.5X25.5X3-MM THK)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
349F XE and 352F XE Excavators

Battery - Recycle
349F XE and 352F XE Excavators

SmartBoom Operation - If Equipped
349F XE and 352F XE Excavators

SmartBoom Control - If Equipped
349F XE and 352F XE Excavators

Power Receptacle - If Equipped
349F XE and 352F XE Excavators

Camera Harness - Disconnect and Connect
349F XE and 352F XE Excavators

Battery Disconnect Switch
349F XE and 352F XE Excavators

Fuses - Replace
349F XE and 352F XE Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 481-5331 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}
Installation of the 481-5331 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}

Installation Procedure for 458-8310 Chassis Wiring Gp On Certain Hydraulic Excavators{5057}
Installation Procedure for 458-8310 Chassis Wiring Gp On Certain Hydraulic Excavators{5057}

Installation of the 480-5425 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5133, 7301}
Installation of the 480-5425 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5133, 7301}

Installation of the 489-0508 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5051, 5057, 5059, 5705, 7301, 7405, 7557}
Installation of the 489-0508 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5051, 5057, 5059, 5705, 7301, 7405, 7557}

Installation of the 489-0499 Wiring Gp On Certain Hydraulic Excavators {1408, 5734}
Installation of the 489-0499 Wiring Gp On Certain Hydraulic Excavators {1408, 5734}

Installation of the 461-0552 Chassis Wiring Gp On Certain Hydraulic Excavators {1408}
Installation of the 461-0552 Chassis Wiring Gp On Certain Hydraulic Excavators {1408}

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

Installation of the 489-0498 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5070, 5073, 7405, 7557}
Installation of the 489-0498 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5070, 5073, 7405, 7557}

Cat Production Measurement System (CPM) Auto Calibration Procedure for Certain 336F XE, 349F XE, 352F XE, 374F, and 390F Excavators {1408, 1901, 7610, 7620}
Cat Production Measurement System (CPM) Auto Calibration Procedure for Certain 336F XE, 349F XE, 352F XE, 374F, and 390F Excavators {1408, 1901, 7610, 7620}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Steel Cable Strap May Damage the Temperature Sensor Wires on Certain Tier 4 Final Engines {1408, 1900}
Steel Cable Strap May Damage the Temperature Sensor Wires on Certain Tier 4 Final Engines {1408, 1900}

Specifications

Electronic Unit Injector Wiring
C13 Tier 4 Final Engines

Wiring (Jacket Water Heater)
C13 Tier 4 Final Engines

Wiring (Auxiliary Start Receptacle)
349F XE and 352F XE Excavators Machine System Specifications

Wiring (Cab)
349F XE and 352F XE Excavators Machine System Specifications

Speed Sensor (Fan Drive)
349F XE and 352F XE Excavators Machine System Specifications

Wiring (Fine Swing)
349F XE and 352F XE Excavators Machine System Specifications

Wiring (Chassis)
349F XE and 352F XE Excavators Machine System Specifications

Wiring (Clean Emissions Module)
349F XE and 352F XE Excavators Machine System Specifications

Wiring (Platform)
349F XE and 352F XE Excavators Machine System Specifications

Service Letter-China

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
349F XE and 352F XE Excavators Tool Control System

Sensors
349F XE and 352F XE Excavators Tool Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C13 Tier 4 Final Engines

Overload Warning - Set - If Equipped
349F XE and 352F XE Excavators Hydraulic System

System Schematic
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Troubleshooting

Electrical Connectors
C13, C15, and C18 Tier 4 Final Engines

ARD Ignition - Test
C13, C15, and C18 Tier 4 Final Engines

Electrical Connector - Inspect
349F XE and 352F XE Excavators

Connector Locations
349F XE and 352F XE Excavators

Wiring Harness (Open Circuit) - Test
349F XE and 352F XE Excavators

Wiring Harness (Short Circuit) - Test
349F XE and 352F XE Excavators

Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Final Engines

System Schematic
349F XE and 352F XE Excavators

Connector Contact Description
349F XE and 352F XE Excavators

Disassembly and Assembly

Nozzle Heater Harness - Remove and Install
C13 Engine for Caterpillar Built Machines

Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C13 Engine for Caterpillar Built Machines

Service Magazine

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}

New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}

New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}
New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}

Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}
Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}

Caterpillar Parts SIS Catalog 349F LXE :

527-0835 WIRING GP-FRONT

527-0834 WIRING GP-FRONT

527-0832 WIRING GP-FRONT

493-3258 WIRING GP-FRONT

493-3257 WIRING GP-FRONT

488-0675 WIRING GP-FRONT

488-0674 WIRING GP-FRONT

377-8214 WIRING GP-PLATFORM

349-6154 WIRING GP-SENSOR

345-6734 WIRING GP-UNIT INJECTOR

460-0860 WIRING GP-VALVE

460-0861 WIRING GP-VALVE

489-0499 WIRING GP-VALVE

460-4988 DRIVE GP-FINAL

480-7428 DRIVE GP-FINAL