HYDRAULIC SYSTEM
VALVE GP-CONTROLSWIVEL GP
TANK GP
LINES GP-PILOT
HYDRAULIC SYSTEM
VALVE GP-CONTROL
#SEBP75590810
416-5350: SPOOL GP-CONTROL VALVE
416-5350 SPOOL GP-CONTROL VALVE
S/N SFG1-UP; RAX1-UP
PART OF 459-1154, 459-1156 VALVE GP-CONTROL
S/N SFG1-UP; RAX1-UP
PART OF 459-1154, 459-1156 VALVE GP-CONTROL
For full view, you need register
Parts for your 349F LXE EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 304-5114 | [1] | SLEEVE | |
| 2. | 317-5154 | [1] | RING-BACKUP | |
| 3. | 346-1626 | [1] | SPRING | |
| 4. | 346-1628 | [1] | RETAINER | |
| 5. | 346-7576 | [1] | WASHER | |
| 6. | [1] | KIT-SEAL | ||
| 7. | 3J-7354 | [1] | SEAL-O-RING | |
| 8. | 4J-0523 | [1] | SEAL-O-RING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP75590811
416-5351: SPOOL GP-CONTROL VALVE
416-5351 SPOOL GP-CONTROL VALVE
S/N SFG1-UP; RAX1-UP
PART OF 346-7580, 459-1166 VALVE GP-CONTROL, 457-5966 VALVE GP-SOLENOID & RELIEF
S/N SFG1-UP; RAX1-UP
PART OF 346-7580, 459-1166 VALVE GP-CONTROL, 457-5966 VALVE GP-SOLENOID & RELIEF
For full view, you need register
#SEBP75590812
416-5352: SPOOL GP-CONTROL VALVE
416-5352 SPOOL GP-CONTROL VALVE
S/N SFG1-UP; RAX1-UP
PART OF 346-7580, 459-1166 VALVE GP-CONTROL, 457-5966 VALVE GP-SOLENOID & RELIEF
S/N SFG1-UP; RAX1-UP
PART OF 346-7580, 459-1166 VALVE GP-CONTROL, 457-5966 VALVE GP-SOLENOID & RELIEF
For full view, you need register
#SEBP75590813
416-5359: SPOOL GP-CONTROL VALVE
416-5359 SPOOL GP-CONTROL VALVE
S/N SFG1-UP; RAX1-UP
PART OF 459-1166 VALVE GP-CONTROL, 457-5966 VALVE GP-SOLENOID & RELIEF
S/N SFG1-UP; RAX1-UP
PART OF 459-1166 VALVE GP-CONTROL, 457-5966 VALVE GP-SOLENOID & RELIEF
For full view, you need register
#SEBP75590814
326-4431: SWIVEL & MOUNTING GP
326-4431 SWIVEL & MOUNTING GP
S/N SFG1-UP; RAX1-UP
PART OF 461-0956, 538-3220 HYDRAULIC AR
S/N SFG1-UP; RAX1-UP
PART OF 461-0956, 538-3220 HYDRAULIC AR
For full view, you need register
Parts for your 349F LXE EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 225-4547 Y | [1] | SWIVEL GP | |
| 2. | 234-4492 | [1] | SUPPORT | |
| 3. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 4. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 6. | 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75590815
225-4547: SWIVEL GP
For full view, you need register
Parts for your 349F LXE EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 455-3798 M | [6] | BOLT (M10X1.5X25-MM) | |
| 2. | 453-3454 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 137-3797 | [1] | COVER | |
| 4. | 095-1716 | [1] | SEAL-O-RING | |
| 5. | 7I-7131 | [1] | RETAINER | |
| 6. | 225-4548 | [1] | HOUSING | |
| 7. | 159-7782 | [5] | SEAL | |
| 8. | 095-1625 | [3] | SEAL-O-RING | |
| 9. | 225-4549 | [1] | ROTOR | |
| 10. | 8T-6759 | [1] | PLUG-PIPE | |
| M | METRIC PART | |||
#SEBP75590816
458-8238: TANK & FILTER GP-HYDRAULIC
458-8238 TANK & FILTER GP-HYDRAULIC
S/N SFG1-UP; RAX1-UP
PART OF 458-8237 TANK & MTG GP-HYDRAULIC
S/N SFG1-UP; RAX1-UP
PART OF 458-8237 TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 349F LXE EXCAVATOR:
CATERPILLAR SIS#SEBP75590817
460-0382: TANK & FILTER GP-HYDRAULIC
460-0382 TANK & FILTER GP-HYDRAULIC
S/N SFG1-UP; RAX1-UP
430-LITER (113.6-US GAL)
PART OF 458-8238 TANK & FILTER GP-HYDRAULIC
S/N SFG1-UP; RAX1-UP
430-LITER (113.6-US GAL)
PART OF 458-8238 TANK & FILTER GP-HYDRAULIC
For full view, you need register
Parts for your 349F LXE EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2827 | [1] | GUIDE-VALVE | |
| 2. | 8J-8782 | [1] | BODY-DRAIN VALVE | |
| 3. | 8J-8783 | [1] | VALVE-DRAIN | |
| 4. | 9J-7031 | [1] | PLUG-DRAIN | |
| 5. | 165-3256 | [1] | PIPE AS | |
| 6. | 188-4145 Y | [2] | FILTER GP-OIL (HYDRAULIC RETURN) | |
| 7. | 227-0592 | [1] | COVER AS | |
| 8. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(HYDRAULIC TANK OIL) | |
| 9. | 289-8194 Y | [2] | FILTER GP-OIL (HYDRAULIC, CASE DRAIN) | |
| 10. | 315-4441 | [1] | SWITCH AS-PRESSURE (HYDRAULIC OIL) | |
| 11. | 326-4434 Y | [1] | SCREEN GP-HYDRAULIC | |
| 12. | 333-4583 | [2] | PIPE | |
| 13. | 347-6081 Y | [1] | GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL) | |
| 14. | 350-7309 | [1] | SUPPORT AS | |
| 15. | 359-8385 | [1] | FLANGE AS | |
| 175-6176 | [1] | SEAL-O-RING | ||
| 16. | 363-2518 Y | [1] | BREATHER GP (HYDRAULIC TANK) | |
| 17. | 460-0386 | [1] | TANK GP-HYDRAULIC | |
| 18. | 095-1735 | [1] | SEAL-O-RING | |
| 19. | 170-8553 M | [4] | BOLT-SOCKET HEAD (M12X1.75X40-MM) | |
| 20. | 1H-8278 | [2] | SEAL-O-RING | |
| 21. | 2H-3934 | [1] | SEAL-O-RING | |
| 22. | 3K-0360 | [1] | SEAL-O-RING | |
| 23. | 4J-0527 | [1] | SEAL-O-RING | |
| 24. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 25. | 5M-2057 | [1] | SEAL-O-RING | |
| 26. | 6D-9157 | [1] | SEAL-O-RING | |
| 27. | 7B-3039 | [1] | SPRING | |
| 28. | 8T-0267 M | [2] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| 29. | 8T-3298 | [1] | SEAL-RECTANGULAR | |
| 30. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 32. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 33. | 8T-4194 M | [16] | BOLT (M12X1.75X50-MM) | |
| 34. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 35. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 36. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 37. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75590818
458-8237: TANK & MTG GP-HYDRAULIC
458-8237 TANK & MTG GP-HYDRAULIC
S/N SFG1-UP; RAX1-UP
PART OF 461-0956, 538-3220 HYDRAULIC AR
S/N SFG1-UP; RAX1-UP
PART OF 461-0956, 538-3220 HYDRAULIC AR
For full view, you need register
Parts for your 349F LXE EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-8178 | [6] | SPACER (0.891X1.625X1.5-IN THK) | |
| 2. | 087-8906 B | [6] | SHIM (2-MM THK) | |
| 3. | 087-8907 B | [6] | SHIM (1-MM THK) | |
| 4. | 087-8909 B | [6] | SHIM (0.4-MM THK) | |
| 5. | 458-8238 Y | [1] | TANK & FILTER GP-HYDRAULIC | |
| 6. | 447-1716 M | [6] | BOLT (M20X2.5X80-MM) | |
| 7. | 135-8579 | [4] | BOLT AS | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75590819
383-9510: VALVE & LINES GP-PILOT
383-9510 VALVE & LINES GP-PILOT -CAB
S/N SFG1-UP; RAX1-UP
PART OF 461-0956, 538-3220 HYDRAULIC AR
S/N SFG1-UP; RAX1-UP
PART OF 461-0956, 538-3220 HYDRAULIC AR
For full view, you need register
Parts for your 349F LXE EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 164-5628 | [1] | CONNECTOR AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 107-6631 | [1] | CONNECTOR-FILTER | ||
| 2. | 338-6970 Y | [1] | SENSOR GP-PRESSURE (TRAVEL, RH) | |
| 2A. | 338-6970 Y | [1] | SENSOR GP-PRESSURE (TRAVEL, LH) | |
| 3. | 369-8502 Y | [1] | VALVE GP-PILOT (TRAVEL, SHUTTLE) | |
| 4. | 148-8336 | [1] | CONNECTOR AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8636 | [1] | CONNECTOR | ||
| 5. | 148-8378 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 6. | 150-3036 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 8T-1905 | [1] | ELBOW | ||
| 7. | 150-4047 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 8T-2353 | [1] | ADAPTER | ||
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
VALVE GP-CONTROL
Operation and Maintenance Manual
Special Instruction
Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}
Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}
Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}
Installation of the <NOBR>489-0508</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5051, 5057, 5059, 5705, 7301, 7405, 7557}
Installation of the489-0508 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5051, 5057, 5059, 5705, 7301, 7405, 7557}
Installation of the
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
Service Letter-Asia
Systems Operation
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Improved Machining Process for the Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, Mobile Hydraulic Power Units and Work Tools {5051, 5464}
Improved Machining Process for the Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, Mobile Hydraulic Power Units and Work Tools {5051, 5464}
Improved Machining Process for the Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, Mobile Hydraulic Power Units and Work Tools {5051, 5464}
Improved Machining Process for the Straight Travel Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5051, 5464}
Improved Machining Process for the Straight Travel Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5051, 5464}
Improved Machining Process for the Straight Travel Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5051, 5464}
Improved Adaptive Control System (ACS) Valve Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {5051}
Improved Adaptive Control System (ACS) Valve Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {5051}
Improved Adaptive Control System (ACS) Valve Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {5051}
