AVSPARE.COM
parts catalog

265-1400 PISTON & ROD GP S/N TXD4716-UP 16.1:1 COMPRESSION RATIO PART OF 387-8534 ENGINE AR-CORE 336D2 L


BASIC ENGINE
PISTON & ROD GP
CYLINDER BLOCK GP
VALVE MECHANISM GP
CRANKSHAFT GP
VALVE MECHANISM GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
FUMES DISPOSAL GP


BASIC ENGINE

PISTON & ROD GP
 

#SEBP75600050
 

265-1400: PISTON & ROD GP

265-1400 PISTON & ROD GP
S/N TXD4716-UP
16.1:1 COMPRESSION RATIO
PART OF 387-8534 ENGINE AR-CORE
i02434196 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-3190 [1] BEARING (CONNECTING ROD)  
2. 160-8199 [1] ROD AS  
2A. 160-8194 [1] BEARING (CONNECTING ROD)  
2B. 160-8197 M [2] BOLT (M12X1.25X62-MM)  
3. 166-3648 [1] PIN-PISTON  
4. 347-2382 [1] RING-PISTON (OIL CONTROL)  
5. 385-1657 [1] CROWN AS-PISTON  
6. 347-2381 [1] RING-PISTON (INTERMEDIATE)  
7. 197-9367 [1] TUBE AS (PISTON COOLING JET)  
8. 347-2380 [1] RING-PISTON (TOP)  
9. 324-7380 [1] SKIRT-PISTON  
10. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
11. 7X-2908 [2] RING-RETAINING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP75600051
 

422-2828: PLUG GP-ENGINE

422-2828 PLUG GP-ENGINE
S/N TXD4716-UP
REQUIRED WHEN NO AIR COMPRESSOR IS USED
PART OF 430-4547 ENGINE AR-COMPLETE
i05866289 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-3708 [2] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
2. 389-3709 [1] PLUG AS  
  238-5082 [1] SEAL-O-RING  
  360-3682 [1] PLUG-O-RING  
3. 398-5596 [2] PLUG AS  
    (EACH INCLUDES)
  238-5080 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
 

#SEBP75600052
 

469-0624: PLUG GP-ENGINE

469-0624 PLUG GP-ENGINE
S/N TXD4716-UP
PART OF 430-4547 ENGINE AR-COMPLETE
i05942376 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-3709 [1] PLUG AS  
  238-5082 [1] SEAL-O-RING  
  360-3682 [1] PLUG-O-RING  
2. 389-3708 [2] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
3. 398-5596 [2] PLUG AS  
    (EACH INCLUDES)
  238-5080 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
 

#SEBP75600053
 

213-9320: ROCKER ARM GP

213-9320 ROCKER ARM GP -EXHAUST
S/N TXD4716-UP
PART OF 212-8926 VALVE MECHANISM GP
i01682584 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 544-0520 [1] ROCKER ARM AS (EXHAUST)  
2. 260-7524 M [1] SCREW-VALVE ADJUSTMENT (M10X1.5-THD)  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP75600054
 

242-0329: ROCKER ARM GP

242-0329 ROCKER ARM GP -INLET
S/N TXD4716-UP
PART OF 212-8926 VALVE MECHANISM GP
i02433900 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-7524 M [1] SCREW-VALVE ADJUSTMENT (M10X1.5-THD)  
2. 544-0521 [1] ROCKER ARM AS  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP75600055
 

178-3899: SEAL GP-CRANKSHAFT

178-3899 SEAL GP-CRANKSHAFT
S/N TXD4716-UP
PART OF 430-4547 ENGINE AR-COMPLETE
i01677959 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4R-9999 [1] EXCLUDER-CRANKSHAFT SEAL  
2. 206-3719 M [9] BOLT AS  
3. 245-7339 [1] SEAL-CRANKSHAFT (FRONT)  
4. 285-4073 [1] SEAL GP-CRANKSHAFT (REAR)  
  M   METRIC PART
 

#SEBP75600056
 

212-8926: VALVE MECHANISM GP

212-8926 VALVE MECHANISM GP
S/N TXD4716-UP
PART OF 242-0447 VALVE MECHANISM GP
i02433895 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-2445 [1] SHAFT AS-ROCKER ARM  
  8F-6575 [2] PLUG-CUP  
2. 163-2459 [6] SPRING  
3. 164-5669 [2] STAND (END)  
4. 176-5913 [4] STAND (MIDDLE)  
5. 176-5914 [1] STAND (OIL)  
6. 213-9320 Y [6] ROCKER ARM GP (EXHAUST)  
7. 242-0329 Y [6] ROCKER ARM GP (INLET)  
8. 5P-8245 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-0646 M [7] BOLT (M12X1.75X110-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75600057
 

242-0447: VALVE MECHANISM GP

242-0447 VALVE MECHANISM GP
S/N TXD4716-UP
PART OF 387-8534 ENGINE AR-CORE
i05258749 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 467-4243 C [12] SPRING-GUIDE  
2. 264-6156 [12] ROD-VALVE PUSH  
3. 453-5998 C [12] LIFTER AS-VALVE  
4. 212-8926 Y [1] VALVE MECHANISM GP  
5. 244-5891 [6] BRIDGE-VALVE  
6. 255-8674 [6] BRIDGE-VALVE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP75600058
 

385-3503: FILTER GP-ENGINE OIL

385-3503 FILTER GP-ENGINE OIL
S/N TXD4716-UP
PART OF 430-4547 ENGINE AR-COMPLETE
i04909921 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-1367 [1] PLUNGER (RELIEF VALVE)  
2. 563-8152 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
3. 7C-1493 [1] VALVE AS-BYPASS (ENGINE OIL FILTER BASE)  
4. 209-7290 [1] GASKET (ENGINE OIL FILTER BASE)  
5. 211-3286 [1] BRACKET  
6. 242-3864 [1] SPRING  
7. 359-5999 [1] BASE  
8. 362-3515 [1] BASE AS-OIL FILTER (ENGINE)  
  6V-7604 [1] PLUG-CUP  
9. 377-9593 [1] PLUG AS  
  9N-6152 [1] PLUG  
9A. 238-5081 [1] SEAL-O-RING  
10. 2Y-5829 M [2] NUT (M10X1.5-THD)  
11. 398-5596 [1] PLUG AS  
  360-3680 [1] PLUG  
  238-5080 [1] SEAL-O-RING  
12. 389-3728 [1] PLUG AS  
  360-3684 [1] PLUG  
12A. 238-5084 [1] SEAL-O-RING  
13. 329-5455 [1] PLUG AS  
  9S-8010 [1] PLUG  
  228-7096 [1] SEAL-O-RING  
14. 4N-8150 [1] SPRING  
15. 5P-7970 M [2] NUT (M8X1.25-THD)  
16. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
17. 6V-3822 M [2] BOLT (M10X1.5X35-MM)  
18. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
19. 8T-0276 M [7] BOLT (M8X1.25X45-MM)  
20. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
21. 9X-2098 M [3] STUD-TAPERLOCK (M8X1.25X45-MM)  
  M   METRIC PART
 

#SEBP75600059
 

196-1829: FUMES DISPOSAL GP

196-1829 FUMES DISPOSAL GP
S/N TXD4716-UP
PART OF 430-4547 ENGINE AR-COMPLETE
i01676372 SEBP7560
  For full view, you need register

Parts for your 336D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0597 [1] CLAMP-HOSE  
2. 196-1831 [1] HOSE-DISPOSAL (FUMES)  
3. 220-1718 [1] BRACKET  
4. 5P-4325 [1] CLIP (LOOP)  
5. 5P-7970 M [1] NUT (M8X1.25-THD)  
6. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
7. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
8. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
9. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

Information:

Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C9 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C9 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C9 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C9 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C9 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C9 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 336D2 L :

Truck sale:

 
Caterpillar 336D2L
- Crawler Excavators
MADISA
 
 
Caterpillar 336D2 L
- Crawler Excavators
MADISA
 
Caterpillar 336D2L
- Crawler Excavators
PESA
 
Caterpillar 336D2L
- Crawler Excavators
PESA
 
Caterpillar 336D2L
- Crawler Excavators
PESA
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.