513-0981 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, RH S/N KBP263-UP PART OF 353-0526 FINAL DRIVE & MOUNTING GP 352F-VG



POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 352F-VG EXCAVATOR KBP
 352F-VG Excavator KBP00001-UP (MACHINE) POWERED BY C13 Engine SEBP7571 352F-VG KBP   (2013)

POWER TRAIN

DRIVE GP-FINAL
DRIVE GP-FINAL
513-0979 DRIVE GP-FINAL
DRIVE GP-FINAL
513-0980 DRIVE GP-FINAL
DRIVE GP-FINAL
513-0981 DRIVE GP-FINAL
DRIVE GP-FINAL
513-0982 DRIVE GP-FINAL
DRIVE GP-FINAL
513-0983 DRIVE GP-FINAL
DRIVE GP-FINAL
518-1209 DRIVE GP-FINAL
 

#SEBP75710530
 

513-0981: DRIVE GP-FINAL

513-0981 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, RH
S/N KBP263-UP
PART OF 353-0526 FINAL DRIVE & MOUNTING GP
i07014912 SEBP7571
5130981 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 513-0982 Y [1] DRIVE GP-FINAL (WITH MOTOR, RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75710531
 

513-0982: DRIVE GP-FINAL

513-0982 DRIVE GP-FINAL -WITH MOTOR, RH
S/N KBP263-UP
PART OF 513-0981 DRIVE GP-FINAL
i07015121 SEBP7571
5130982 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 417-7195 Y [1] MOTOR & MTG GP-TRAVEL  
2. 513-0983 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, RH)  
3. 095-1269 M [1] SETSCREW-SOCKET (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75710532
 

513-0983: DRIVE GP-FINAL

513-0983 DRIVE GP-FINAL -WITHOUT MOTOR, RH
S/N KBP263-UP
PART OF 513-0982 DRIVE GP-FINAL
i07015173 SEBP7571
5130983 DRIVE GP-FINAL Parts scheme 5130983 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7Y-0808 B [1] SHIM (1.6-MM THK)  
2. 7Y-1469 [1] COUPLING  
3. 7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
12. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
13. 114-1541 [6] PIN-DOWEL  
14. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
15. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
16. 199-4719 [1] GEAR-COUPLING  
17. 227-6048 [12] WASHER (26X40X4-MM THK)  
18. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
19. 296-6185 [4] SHAFT  
20. 296-6195 [3] SHAFT  
21. 333-2927 [1] GEAR-SUN (18-TEETH)  
22. 333-2928 [1] GEAR-SUN (21-TEETH)  
23. 333-2929 [1] GEAR-SUN (21-TEETH)  
24. 333-2930 [3] GEAR-PLANETARY (21-TEETH)  
25. 333-2931 [3] GEAR-PLANETARY (20-TEETH)  
26. 333-2932 [4] GEAR-PLANETARY (20-TEETH)  
27. 333-2936 [1] CARRIER AS  
28. 333-2938 [1] CARRIER-PLANETARY  
29. 333-2939 [1] CARRIER-PLANETARY  
30. 333-2942 [1] SPACER (183X209.6X8.5-MM THK)  
31. 333-2960 [1] GEAR-RING  
32. 333-3035 [1] PLATE  
33. 346-5216 [11] BEARING-NEEDLE  
34. 346-5556 [2] CONE-BEARING  
35. 353-0605 [1] HOUSING-GEAR  
36. 451-2176 [28] WASHER-HARD (22X35X3.5-MM THK)  
37. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 452-3520 [1] HOUSING-MOTOR  
39. 480-7403 [1] COVER  
40. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
41. 096-8058 [3] RING-RETAINING  
42. 143-0811 M [20] BOLT (12X1.75X35-MM)  
43. 238-6588 [7] PIN-SPRING  
44. 296-6248 [3] BEARING AS-ROLLER  
45. 2R-0525 [2] CUP-BEARING  
46. 3E-2338 [2] PLUG-PIPE  
47. 4S-5924 [1] SEAL-O-RING  
48. 5P-8245 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 6V-8133 M [12] BOLT (M24X3X80-MM)  
50. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
51. 7M-8485 [2] SEAL-O-RING  
52. 7Y-0667 [2] RING-RETAINING  
53. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
54. 7Y-5217 M [28] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
55. 8C-5240 [1] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP75710533
 

518-1209: DRIVE GP-FINAL

518-1209 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, LH
S/N KBP263-UP
PART OF 353-0526 FINAL DRIVE & MOUNTING GP
i07016289 SEBP7571
5181209 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 504-1673 Y [1] DRIVE GP-FINAL (WITH MOTOR, LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75710534
 

518-1210: DRIVE GP-FINAL

518-1210 DRIVE GP-FINAL
S/N KBP263-UP
PART OF 353-0526 FINAL DRIVE & MOUNTING GP
i07016374 SEBP7571
5181210 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 518-1211 Y [1] DRIVE GP-FINAL (WITH MOTOR, RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75710535
 

518-1211: DRIVE GP-FINAL

518-1211 DRIVE GP-FINAL -WITH MOTOR, RH
S/N KBP263-UP
PART OF 518-1210 DRIVE GP-FINAL
i07016378 SEBP7571
5181211 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 417-7195 Y [1] MOTOR & MTG GP-TRAVEL  
2. 518-1212 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, RH)  
3. 095-1269 M [1] SETSCREW-SOCKET (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75710536
 

518-1212: DRIVE GP-FINAL

518-1212 DRIVE GP-FINAL -WITHOUT MOTOR, RH
S/N KBP263-UP
PART OF 518-1211 DRIVE GP-FINAL
i07016385 SEBP7571
5181212 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7Y-0808 B [1] SHIM (1.6-MM THK)  
2. 7Y-1469 [1] COUPLING  
3. 7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
12. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
13. 114-1541 [6] PIN-DOWEL  
14. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
15. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
16. 199-4719 [1] GEAR-COUPLING  
17. 227-6048 [12] WASHER (26X40X4-MM THK)  
18. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
19. 296-6185 [4] SHAFT  
20. 296-6195 [3] SHAFT  
21. 333-2927 [1] GEAR-SUN (18-TEETH)  
22. 333-2928 [1] GEAR-SUN (21-TEETH)  
23. 333-2929 [1] GEAR-SUN (21-TEETH)  
24. 333-2930 [3] GEAR-PLANETARY (21-TEETH)  
25. 333-2931 [3] GEAR-PLANETARY (20-TEETH)  
26. 333-2932 [4] GEAR-PLANETARY (20-TEETH)  
27. 333-2936 [1] CARRIER AS  
28. 333-2938 [1] CARRIER-PLANETARY  
29. 333-2939 [1] CARRIER-PLANETARY  
30. 333-2942 [1] SPACER (183X209.6X8.5-MM THK)  
31. 333-2960 [1] GEAR-RING  
32. 333-3035 [1] PLATE  
33. 346-5216 [11] BEARING-NEEDLE  
34. 346-5556 [2] CONE-BEARING  
35. 353-0605 [1] HOUSING-GEAR  
36. 451-2176 [28] WASHER-HARD (22X35X3.5-MM THK)  
37. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 452-3520 [1] HOUSING-MOTOR  
39. 480-7403 [1] COVER  
40. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
41. 096-8058 [3] RING-RETAINING  
42. 143-0811 M [20] BOLT (12X1.75X35-MM)  
43. 238-6588 [7] PIN-SPRING  
44. 296-6248 [3] BEARING AS-ROLLER  
45. 2R-0525 [2] CUP-BEARING  
46. 3E-2338 [2] PLUG-PIPE  
47. 4S-5924 [1] SEAL-O-RING  
48. 5P-8245 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 6V-8133 M [12] BOLT (M24X3X80-MM)  
50. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
51. 7M-8485 [2] SEAL-O-RING  
52. 7Y-0667 [2] RING-RETAINING  
53. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
54. 7Y-5217 M [28] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
55. 8C-5240 [1] SEAL-O-RING  
56. 503-0954 [1] GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP75710537
 

353-0526: FINAL DRIVE & MOUNTING GP

353-0526 FINAL DRIVE & MOUNTING GP
S/N KBP1-262
PART OF 333-2877 POWER TRAIN AR
i04370722 SEBP7571
3530526 FINAL DRIVE & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 353-0527 Y [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
2. 451-2177 [40] WASHER-HARD (26X44X4-MM THK)  
3. 447-1725 M [40] BOLT (M24X3X80-MM)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75710538
 

353-0526: FINAL DRIVE & MOUNTING GP

353-0526 FINAL DRIVE & MOUNTING GP
S/N KBP263-UP
PART OF 333-2877 POWER TRAIN AR
Type 1
i06723303 SEBP7571
3530526 FINAL DRIVE & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 460-4988 CY [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
2. 6V-8237 [40] WASHER (26X44X4-MM THK)  
3. 509-7907 M [40] BOLT-HEAD (M24X3X80-MM)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75710539
 

353-0526: FINAL DRIVE & MOUNTING GP

353-0526 FINAL DRIVE & MOUNTING GP
S/N KBP263-UP
PART OF 333-2877 POWER TRAIN AR
Type 2
i07014554 SEBP7571
3530526 FINAL DRIVE & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 352F-VG EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. CY [1] DRIVE GP-FINAL (WITH MOTOR, SPROCKET, LH)  
2. 6V-8237 [40] WASHER (26X44X4-MM THK)  
3. 173-9779 M [40] BOLT (M24X3X80-MM)  
4. CY [1] DRIVE GP-FINAL (WITH MOTOR, SPROCKET, RH)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Final Drive Oil - Change
349F and 352F Excavators
Final Drive Oil Level - Check
349F and 352F Excavators
Final Drive Oil Sample - Obtain
349F and 352F Excavators
Special Instruction
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Procedure to Replace the Full Open Labyrinth with the Partial Open Labyrinth Motor Housing on the Final Drives for Certain Excavators and Mobile Hydraulic Power Units {4050}
Procedure to Replace the Full Open Labyrinth with the Partial Open Labyrinth Motor Housing on the Final Drives for Certain Excavators and Mobile Hydraulic Power Units {4050}
Specifications
Final Drive
349F and 352F Excavators Machine System Specifications
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Final Drive
349F and 352F Excavators Hydraulic System
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
349F and 352F Excavators Machine Systems
Final Drive and Travel Motor - Remove and Install
349F and 352F Excavators Machine Systems
Final Drive - Disassemble
349F and 352F Excavators Machine Systems
Final Drive - Assemble
349F and 352F Excavators Machine Systems
Service Magazine
Final Drive Motor Housings Are Available for Certain Excavators {4050}
2015/06/19
A New Final Drive Cover Is Now Used on Certain Hydraulic Excavators {4050}
A New Final Drive Cover Is Now Used on Certain Hydraulic Excavators {4050}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 352F-VG :

DRIVE GP-FINAL
513-0980 DRIVE GP-FINAL
DRIVE GP-FINAL
513-0979 DRIVE GP-FINAL
DRIVE GP-FINAL
513-0978 DRIVE GP-FINAL
DRIVE GP-FINAL
504-1674 DRIVE GP-FINAL
DRIVE GP-FINAL
504-1673 DRIVE GP-FINAL
DRIVE GP-FINAL
480-7429 DRIVE GP-FINAL
DRIVE GP-FINAL
480-7428 DRIVE GP-FINAL
DRIVE GP-FINAL
460-4988 DRIVE GP-FINAL
DRIVE GP-FINAL
513-0982 DRIVE GP-FINAL
DRIVE GP-FINAL
513-0983 DRIVE GP-FINAL
DRIVE GP-FINAL
518-1209 DRIVE GP-FINAL
DRIVE GP-FINAL
518-1210 DRIVE GP-FINAL
DRIVE GP-FINAL
518-1211 DRIVE GP-FINAL
DRIVE GP-FINAL
518-1212 DRIVE GP-FINAL
FINAL DRIVE & MOUNTING GP
353-0526 FINAL DRIVE & MOUNTING GP
FINAL DRIVE & MOUNTING GP
353-0526 FINAL DRIVE & MOUNTING GP