385-4097 STICK AR-HOE -REACH, HEAVY-DUTY, AUXILIARY S/N FAP1-UP 2.5-M (8.2-FT) PART OF 476-7362 DISTRIBUTION AR 313D2

Part No	Qty	Parts name
179-7601 Y	[1]	LINES GP-STICK (REACH)
392-0367 Y	[1]	STICK GP-HOE (HEAVY-DUTY, REACH)
Y		SEPARATE ILLUSTRATION

#SEBP75750391

392-0362: STICK GP-HOE

392-0362 STICK GP-HOE -WITHOUT AUXILIARY
S/N GAP1-UP
2.5-M (8.2-FT)
PART OF 385-4096 STICK AR-HOE

i04979203 SEBP7575

For full view, you need register

Parts for your 313D2 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	1R-6225	[1]	PIN AS
2.	093-0357	[2]	SPACER (63X100X9-MM THK)
3.	127-3913	[1]	PIN AS
4.	166-1481	[2]	SHIM (2-MM THK)
5.	166-1492	[2]	SEAL-LIP TYPE
6.	248-7836	[2]	SEAL-LIP TYPE
7.	392-0363	[1]	STICK & BEARING AS
7A.	229-1091	[2]	BUSHING
7B.	229-1095	[2]	BUSHING
7C.	273-6814	[2]	BUSHING
8.	086-0297	[2]	WASHER (13X50X6-MM THK)
9.	166-1494	[2]	SEAL-LIP TYPE
10.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
11.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
	M		METRIC PART

#SEBP75750392

392-0367: STICK GP-HOE

392-0367 STICK GP-HOE -HEAVY-DUTY, REACH
S/N FAP1-UP
2.5-M (8.2-FT)
PART OF 385-4097 STICK AR-HOE

i04948526 SEBP7575

For full view, you need register

Parts for your 313D2 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	1R-6225	[1]	PIN AS
2.	093-0357	[2]	SPACER (63X100X9-MM THK)
3.	127-3913	[1]	PIN AS
4.	166-1481 B	[2]	SHIM (2-MM THK)
5.	166-1492	[2]	SEAL-LIP TYPE
6.	248-7836	[2]	SEAL-LIP TYPE
7.	392-0368	[1]	STICK & BEARING AS
7A.	229-1091	[2]	BUSHING
7B.	229-1095	[2]	BUSHING
7C.	273-6814	[2]	BUSHING (1000 SERVICE HOURS)
8.	086-0297	[2]	WASHER (13X50X6-MM THK)
9.	166-1494	[2]	SEAL-LIP TYPE
10.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
11.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP75750393

393-4026: STICK GP-HOE

393-4026 STICK GP-HOE
S/N GAP1-UP
3-M (9.8-FT)
PART OF 283-9014 STICK AR-HOE

i05205950 SEBP7575

For full view, you need register

Parts for your 313D2 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	1R-6225	[1]	PIN AS
2.	093-0357	[2]	SPACER (63X100X9-MM THK)
3.	127-3913	[1]	PIN AS
4.	166-1481	[2]	SHIM (2-MM THK)
5.	166-1492	[2]	SEAL-LIP TYPE
6.	248-7836	[2]	SEAL-LIP TYPE
7.	393-4028	[1]	STICK & BEARING AS
7A.	229-1091	[2]	BUSHING
7B.	229-1095	[2]	BUSHING
7C.	357-5710	[2]	BUSHING
8.	086-0297	[2]	WASHER (13X50X6-MM THK)
9.	166-1494	[2]	SEAL-LIP TYPE
10.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
11.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
	M		METRIC PART

#SEBP75750394

393-4054: STICK GP-HOE

393-4054 STICK GP-HOE
S/N GAP1-UP
2.5-M (8.2-FT)
PART OF 283-9016 STICK AR-HOE

i05206317 SEBP7575

For full view, you need register

Parts for your 313D2 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	1R-6225	[1]	PIN AS
2.	093-0357	[2]	SPACER (63X100X9-MM THK)
3.	127-3913	[1]	PIN AS
4.	166-1481	[2]	SHIM (2-MM THK)
5.	166-1492	[2]	SEAL-LIP TYPE
6.	248-7836	[2]	SEAL-LIP TYPE
7.	393-4055	[1]	STICK & BEARING AS
7A.	229-1091	[2]	BUSHING
7B.	229-1095	[2]	BUSHING
7C.	357-5710	[2]	BUSHING
8.	086-0297	[2]	WASHER (13X50X6-MM THK)
9.	166-1494	[2]	SEAL-LIP TYPE
10.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
11.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
	M		METRIC PART

#SEBP75750395

4I-6914: ADJUSTER GP-BUCKET

ADJUSTER GP-BUCKET

4I-6914 ADJUSTER GP-BUCKET
S/N FAP1-UP; GAP1-UP
PART OF 358-8615, 358-8616, 358-8617, 358-8643, 367-2003, 527-1254 BUCKET & ADJUSTER GP

i03851651 SEBP7575

For full view, you need register

Parts for your 313D2 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	086-0416 B	[6]	SHIM (1-MM THK)
2.	086-0415 B	[4]	SHIM (0.5-MM THK)
3.	085-9769	[1]	PIN
4.	085-8828	[1]	PLATE
5.	8T-4183 M	[4]	BOLT (M12X1.75X40-MM)
6.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
7.	086-0414	[1]	FLANGE
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP75750396

358-8615: BUCKET & ADJUSTER GP

358-8615 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N FAP1-UP
900-MM (36-IN) WIDE X 0.5-CU M (0.7-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 5
PART OF 484-0191 BUCKET AR-GENERAL PURPOSE

i05818797 SEBP7575

3588615 BUCKET & ADJUSTER GP Parts scheme

For full view, you need register

Parts for your 313D2 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4I-6914 Y	[1]	ADJUSTER GP-BUCKET
2.	358-8627 Y	[1]	BUCKET AS-GENERAL PURPOSE
3.	2C-9259	[1]	PLATE-IDENTIFICATION (CAT)
4.	312-5694	[1]	SETSCREW (1/4-20X0.25-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP75750397

358-8616: BUCKET & ADJUSTER GP

358-8616 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N GAP1-UP
900-MM (36-IN) WIDE X 0.5-CU M (0.7-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 6
PART OF 432-8367 BUCKET AR-GENERAL PURPOSE

i04992250 SEBP7575

For full view, you need register

Parts for your 313D2 EXCAVATOR:

Part No	Qty	Parts name
4I-6914 Y	[1]	ADJUSTER GP-BUCKET
358-8628 Y	[1]	BUCKET AS-GENERAL PURPOSE

2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
		(ON LH SIDE OF BUCKET)
312-5694	[1]	SETSCREW (1/4-20X0.25-IN)
		(USE TO MOUNT BUCKET INFORMATION PLATE)
Y		SEPARATE ILLUSTRATION

#SEBP75750398

358-8617: BUCKET & ADJUSTER GP

358-8617 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N FAP1-UP
1000-MM (39-IN) WIDE X 0.6-CU M (0.8-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 6
PART OF 507-0131 BUCKET AR-GENERAL PURPOSE

i06662329 SEBP7575

3588617 BUCKET & ADJUSTER GP Parts scheme

For full view, you need register

Parts for your 313D2 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4I-6914 Y	[1]	ADJUSTER GP-BUCKET
2.	358-8629 Y	[1]	BUCKET AS-GENERAL PURPOSE
3.	2C-9259	[1]	PLATE-IDENTIFICATION (CAT)
4.	312-5694	[1]	SETSCREW (1/4-20X0.25-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP75750399

358-8643: BUCKET & ADJUSTER GP

358-8643 BUCKET & ADJUSTER GP
S/N FAP1-UP; GAP1-UP
1087-MM (43-IN) WIDE X 0.65-CU M (0.85-CU YD) CAPACITY. J-300 ADAPTERS, QTY OF 5
PART OF 396-8956 BUCKET AR-SEVERE SERVICE ROCK

i05859640 SEBP7575

For full view, you need register

Parts for your 313D2 EXCAVATOR: