HYDRAULIC SYSTEM
FITTING GPTANK GP
PUMP GP
HYDRAULIC GP
OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-AUXILIARYLINES GP-COUPLER
LINES GP-AUXILIARY
HYDRAULIC SYSTEM
FITTING GP#SEBP75760290
221-5069: FITTING GP-HYDRAULIC
221-5069 FITTING GP-HYDRAULIC
S/N HBP1-UP
PART OF 260-8204, 499-5168 LINES GP-HYDRAULIC
S/N HBP1-UP
PART OF 260-8204, 499-5168 LINES GP-HYDRAULIC
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 221-5070 | [1] | TEE AS (TEE,REDUCER & NUT) | ||
| 6V-8556 | [1] | NUT (1-3/16-12-THD) | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8942 | [1] | REDUCER-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8784 | [1] | TEE-FACE SEAL | ||
| 6V-9746 | [2] | SEAL-O-RING | ||
| -OR- | ||||
| 221-5071 | [1] | TEE AS (FABRICATED TEE) | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
#SEBP75760291
347-6081: GAUGE GP-SIGHT
347-6081 GAUGE GP-SIGHT -HYDRAULIC OIL LEVEL
S/N HBP1-UP
PART OF 454-7359, 499-5169 TANK & FILTER GP-HYDRAULIC
S/N HBP1-UP
PART OF 454-7359, 499-5169 TANK & FILTER GP-HYDRAULIC
For full view, you need register
#SEBP75760292
267-1624: HEAD GP-PUMP
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 099-3669 B | [2] | SHIM (1-MM THK) | |
| 099-6109 B | [2] | SHIM (1.05-MM THK) | ||
| 099-6110 B | [2] | SHIM (1.1-MM THK) | ||
| 099-6111 B | [2] | SHIM (1.15-MM THK) | ||
| 099-6112 B | [2] | SHIM (1.2-MM THK) | ||
| 099-6113 B | [2] | SHIM (1.25-MM THK) | ||
| 099-6115 B | [2] | SHIM (1.3-MM THK) | ||
| 8. | 173-1170 | [1] | SPRING | |
| 9. | 173-3389 | [2] | STOPPER | |
| 10. | 174-7220 | [2] | COVER | |
| 11. | 174-7221 | [1] | COVER | |
| 12. | 174-7222 | [1] | COVER | |
| 14. | 192-2376 | [1] | PIN AS | |
| 192-0573 | [1] | PIN-DOWEL | ||
| 15. | 200-3247 | [1] | SPRING | |
| 16. | 225-0224 M | [1] | SETSCREW (M16X2X55-MM) | |
| 17. | 225-0225 M | [1] | SETSCREW (M16X2X45-MM) | |
| 18. | 267-1626 | [1] | SPOOL AS | |
| 19. | 268-4201 | [1] | LEVER AS | |
| 094-1875 | [1] | DOWEL | ||
| 20. | 268-4203 | [1] | PIN | |
| 21. | 273-8316 | [1] | SEAL-O-RING | |
| 22. | 273-8317 | [1] | SEAL-O-RING | |
| 23. | 273-8318 | [1] | SEAL-O-RING | |
| 24. | 281-6847 | [1] | PISTON | |
| 26. | 301-6874 | [1] | RETAINER | |
| 27. | 301-8294 | [1] | ADJUSTER | |
| 28. | 094-1881 | [1] | PLATE-SLIDE | |
| 29. | 095-1788 | [2] | RING-BACKUP | |
| 30. | 099-3671 | [1] | SPRING | |
| 31. | 185-0169 | [1] | GUIDE | |
| 32. | 189-9763 | [3] | SEAL-O-RING | |
| 33. | 190-7674 | [2] | SEAL-O-RING | |
| 34. | 200-3255 M | [1] | NUT (M20X1.5-THD) | |
| 35. | 267-1625 | [1] | SPRING | |
| 36. | 2H-9247 | [1] | SEAL-O-RING | |
| 37. | 3D-2891 | [1] | BALL | |
| 38. | 3J-1907 | [1] | SEAL-O-RING | |
| 39. | 4J-7533 | [9] | SEAL-O-RING | |
| 40. | 6V-5391 | [1] | SEAL-O-RING | |
| 41. | 8T-4132 M | [2] | NUT (M16X2-THD) | |
| 42. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 43. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| 44. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 45. | 225-4804 | [9] | PLUG | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP75760293
470-6882: HYDRAULIC AR
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 435-8395 Y | [1] | LINES GP-CYLINDER | ||
| 366-8650 Y | [1] | LINES GP-FRONT | ||
| 391-7830 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 278-6672 Y | [1] | LINES GP-PILOT (JOYSTICK, PEDALS) | ||
| 387-3716 Y | [1] | LINES GP-PILOT (FILTER, PILOT PUMP) | ||
| 473-9348 Y | [1] | LINES GP-PILOT (MAIN CONTROL VALVE) | ||
| 473-9354 Y | [1] | LINES GP-PILOT | ||
| 391-7825 Y | [1] | LINES GP-PUMP (OUTPUT, HYD OIL CLR BYPASS) | ||
| 391-7836 Y | [1] | LINES GP-PUMP (SUPPLY, MAIN PUMP) | ||
| 260-8212 Y | [1] | LINES GP-TRAVEL MOTOR (LONG CARRIAGE) | ||
| 302-3225 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 387-2618 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 455-4106 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 420-2243 Y | [1] | VALVE GP-MAIN CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75760294
503-4906: HYDRAULIC AR
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 435-8395 Y | [1] | LINES GP-CYLINDER | ||
| 366-8650 Y | [1] | LINES GP-FRONT | ||
| 391-7830 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 278-6672 Y | [1] | LINES GP-PILOT (JOYSTICK, PEDALS) | ||
| 473-9348 Y | [1] | LINES GP-PILOT (MAIN CONTROL VALVE) | ||
| 502-5321 Y | [1] | LINES GP-PILOT (FILTER, PILOT PUMP) | ||
| 502-5322 Y | [1] | LINES GP-PILOT (CONTROL VALVE, PUMP) | ||
| 502-5320 Y | [1] | LINES GP-PUMP (REAR) | ||
| 502-5323 Y | [1] | LINES GP-PUMP (SUPPLY, MAIN PUMP) | ||
| 260-8212 Y | [1] | LINES GP-TRAVEL MOTOR (LONG CARRIAGE) | ||
| 302-3225 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 387-2618 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 499-5167 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 420-2243 Y | [1] | VALVE GP-MAIN CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75760295
234-6613: LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N HBP1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
S/N HBP1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5998 D | TUBE (0.3-M) | |||
| 4. | 185-8286 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | |
| 5. | 234-6615 | [1] | KNOB | |
| 6. | 087-4683 | [2] | LOCKWASHER | |
| 7. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP75760296
375-6664: LINES AR-AUXILIARY HYDRAULIC
375-6664 LINES AR-AUXILIARY HYDRAULIC
S/N HBP1-UP
S/N HBP1-UP
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS#SEBP75760297
375-6665: LINES AR-QUICK COUPLER
375-6665 LINES AR-QUICK COUPLER
S/N HBP1-UP
S/N HBP1-UP
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS#SEBP75760298
262-3234: LINES GP-AUXILIARY HYDRAULIC
262-3234 LINES GP-AUXILIARY HYDRAULIC -BOOM, HIGH PRESSURE
S/N HBP1-UP
PART OF 375-6664 LINES AR-AUXILIARY HYDRAULIC
S/N HBP1-UP
PART OF 375-6664 LINES AR-AUXILIARY HYDRAULIC
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7Y-3732 | [8] | CLIP | |
| 2. | 7Y-4868 | [8] | CLIP | |
| 3. | 197-2299 I | [1] | HOSE AS | |
| 4. | 253-6276 | [2] | PLATE | |
| 5. | 262-3538 I | [1] | HOSE AS | |
| 6. | 268-6940 J | [1] | LINES GP-BOOM (LH, HIGH FLOW) | |
| 6A. | 6V-9746 L | [1] | SEAL-O-RING | |
| 6B. | 262-3534 L | [1] | TUBE AS | |
| 6C. | 262-3535 L | [1] | TUBE AS | |
| 7. | 268-6943 J | [1] | LINES GP-BOOM (RH, HIGH FLOW) | |
| 7A. | 1P-3703 L | [1] | SEAL-RECTANGULAR | |
| 7B. | 8T-4139 LM | [4] | BOLT (M12X1.75X30-MM) | |
| 7C. | L | [1] | TUBE AS | |
| 7D. | L | [1] | TUBE AS | |
| 8. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 9. | 6V-0400 | [4] | FLANGE-HALF | |
| 10. | 6V-9746 | [2] | SEAL-O-RING | |
| 11. | 7X-2549 M | [4] | BOLT (M12X1.75X100-MM) | |
| 12. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 14. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 15. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN) | |||
| L | PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN | |||
| M | METRIC PART | |||
#SEBP75760299
262-3240: LINES GP-AUXILIARY HYDRAULIC
262-3240 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N HBP1-UP
FOR USE WITH 2.6 TO 2.7-M (8.5 TO 8.9-FT) STICK
S/N HBP1-UP
FOR USE WITH 2.6 TO 2.7-M (8.5 TO 8.9-FT) STICK
For full view, you need register
Parts for your 318D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 101-7403 M | [4] | BOLT-SOCKET HEAD (M10X1.5X80-MM) | |
| 2. | 212-5326 I | [1] | HOSE AS | |
| 3. | 277-1089 I | [1] | HOSE AS | |
| 4. | 282-5881 | [1] | TUBE AS | |
| 5. | 282-5882 | [1] | TUBE AS | |
| 6. | 282-5894 Y | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF) | |
| 7. | 1P-3703 | [4] | SEAL-RECTANGULAR | |
| 8. | 6V-0400 | [4] | FLANGE-HALF | |
| 9. | 6V-9746 | [1] | SEAL-O-RING | |
| 10. | 7Y-3732 | [4] | CLIP | |
| 11. | 7Y-4868 | [4] | CLIP | |
| 12. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 14. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 15. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
