466-1863 WIRING GP-CONSOLE -RH S/N SZK1-UP PART OF 466-1861 WIRING GP-CONSOLE 330D2 L EXCAVATOR



ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 330D2 L EXCAVATOR SZK
 330D2 L Excavator SZK00001-UP (MACHINE) POWERED BY C7.1 Engine SEBP7584 330D2 L SZK   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
466-1861 WIRING GP-CONSOLE
WIRING GP-CONSOLE
466-1862 WIRING GP-CONSOLE
WIRING GP-CONSOLE
466-1863 WIRING GP-CONSOLE
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
 

#SEBP75840210
 

466-1863: WIRING GP-CONSOLE

466-1863 WIRING GP-CONSOLE -RH
S/N SZK1-UP
PART OF 466-1861 WIRING GP-CONSOLE
i06126243 SEBP7584
4661863 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 7K-1181 [2] STRAP-CABLE  
3. 163-6795 [1] STRAP-CABLE  
4. 466-5335 Y [1] HARNESS AS-CONSOLE  
5. 3E-9375 E CONDUIT (10-CM)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP75840211
 

350-8250: WIRING GP-CONVERTER

350-8250 WIRING GP-CONVERTER -12-VOLT, 10-AMPERE
S/N SZK1-UP
PART OF 482-7691, 507-5787 OPTION AR-CAB
i04250629 SEBP7584
3508250 WIRING GP-CONVERTER Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 479-9395 [1] BRACKET  
2. 475-2681 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
3. 324-5771 [2] SOCKET-AUXILIARY POWER (12-VOLT)  
4. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
6. 8T-4138 M [2] BOLT (M6X1X20-MM)  
7. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP75840212
 

395-0113: WIRING GP-ENGINE

395-0113 WIRING GP-ENGINE
S/N BD41-UP
PART OF 452-0960 ENGINE AR-PRIMARY
i05954940 SEBP7584
3950113 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 323-7347 C [3] SEAL-O-RING  
2. 254-3633 CM [3] BOLT-FLANGE HEAD (M6X1X16-MM, SELF LOCKING)  
3. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
4. 217-9039 [1] STRAP-CABLE  
5. 348-4637 [1] BOLT  
6. 458-3745 C [3] HARNESS AS-PLATFORM  
    (EACH INCLUDES)
  332-7865 [1] TIE-CABLE  
7. 377-1293 [1] BRACKET  
8. 385-5997 Y [1] HARNESS AS-ENGINE  
9. 389-3863 [1] BRACKET  
10. 392-2780 [1] BRACKET  
11. 132-5789 [1] CLIP (LADDER)  
12. 232-1693 M [1] BOLT-FLANGE HEAD (M6X1X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75840213
 

395-0113: WIRING GP-ENGINE

395-0113 WIRING GP-ENGINE
S/N BD41-UP
PART OF 452-0960, 542-4983 ENGINE AR-PRIMARY
i06932303 SEBP7584
3950113 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 033-6034 C [3] SEAL-O-RING  
2. 277-5065 C [3] CLIP  
3. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
4. 217-9039 [1] STRAP-CABLE  
5. 348-4637 [1] BOLT  
6. 375-8407 CY [3] HARNESS AS-WIRING (INJECTOR)  
7. 377-1293 [1] BRACKET  
8. 385-5997 Y [1] HARNESS AS-ENGINE  
9. 389-3863 [1] BRACKET  
10. 392-2780 [1] BRACKET  
11. 132-5789 [1] CLIP (LADDER)  
12. 232-1693 M [1] BOLT-FLANGE HEAD (M6X1X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75840214
 

259-4965: WIRING GP-FINE SWING

259-4965 WIRING GP-FINE SWING
S/N SZK1-UP
PART OF 479-3146 CHASSIS AR
i02534126 SEBP7584
2594965 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7Y-8109 [1] BRACKET AS  
2. 111-4836 [6] CLIP  
3. 111-4837 [2] CLIP  
4. 291-7551 [1] HARNESS AS-MOTOR  
5. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
7. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP75840215
 

472-7637: WIRING GP-PLATFORM

472-7637 WIRING GP-PLATFORM
S/N SZK1-UP
PART OF 477-5171 OPERATOR AR
Type 1
i06122252 SEBP7584
4727637 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [3] STRAP-CABLE  
3. 7G-1060 [1] STRAP AS-GROUND  
4. 7K-1181 [17] STRAP-CABLE  
5. 111-4836 [6] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [8] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 472-7727 Y [1] HARNESS AS-PLATFORM  
11. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
12. 111-4838 [2] CLIP  
13. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
14. 7X-2621 M [5] BOLT (M10X1.5X12-MM)  
15. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75840216
 

472-7637: WIRING GP-PLATFORM

472-7637 WIRING GP-PLATFORM
S/N SZK1-UP
PART OF 477-5171 OPERATOR AR
Type 2
i07157470 SEBP7584
4727637 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [3] STRAP-CABLE  
3. 7G-1060 [1] STRAP AS-GROUND  
4. 7K-1181 [17] STRAP-CABLE  
5. 111-4836 [6] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [8] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 539-5842 CY [1] HARNESS AS-PLATFORM  
11. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
12. 111-4838 [2] CLIP  
13. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
14. 7X-2621 M [5] BOLT (M10X1.5X12-MM)  
15. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
16. 8T-4121 C [13] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 CM [8] BOLT (M10X1.5X20-MM)  
18. 453-3454 C [1] WASHER-HARD (11X21X2.5-MM THK)  
19. 457-8759 CM [1] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75840217
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N SZK1-UP
PART OF 419-8979 PUMP AR-FUEL TRANSFER
i03161283 SEBP7584
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75840218
 

353-0492: DRIVE GP-FINAL

353-0492 DRIVE GP-FINAL
S/N SZK1-UP
PART OF 171-9410 POWER TRAIN AR
i05238592 SEBP7584
3530492 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 179-2994 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 378-9568 CY [1] DRIVE GP-FINAL (WITH MOTOR)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP75840219
 

378-9567: DRIVE GP-FINAL

378-9567 DRIVE GP-FINAL -WITHOUT MOTOR
S/N SZK1-UP
PART OF 378-9568 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@515-0070@@@@@, @@@@@515-0073@@@@@
i05239035 SEBP7584
3789567 DRIVE GP-FINAL Parts scheme 3789567 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330D2 L EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7Y-0752 B [1] SHIM (0.8-MM THK)  
  7Y-0753 B [1] SHIM (1-MM THK)  
  7Y-0754 B [1] SHIM (1.6-MM THK)  
4. 094-0578 [1] PLATE (8-MM THK)  
5. 094-0579 [1] PLATE (9-MM THK)  
6. 094-0580 [1] PLATE (10-MM THK)  
7. 094-1528 [12] WASHER (53X84X1-MM THK)  
8. 114-1540 [4] PIN-DOWEL  
9. 169-5589 [1] GEAR-SUN (24-TEETH)  
10. 169-5590 [1] GEAR-SUN (24-TEETH)  
11. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
12. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
13. 169-5601 [3] SHAFT-PLANETARY  
14. 169-5602 [3] SHAFT-PLANETARY  
15. 171-9387 [1] GEAR-RING (64-TEETH)  
16. 191-2571 [1] CARRIER-PLANETARY  
17. 191-2676 [1] GEAR-RING (72-TEETH)  
18. 191-2683 [1] GEAR-SUN (20-TEETH)  
19. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
20. 191-2686 [1] CARRIER AS  
  191-2687 [3] RACE-BEARING  
21. 191-2689 [3] WASHER (34X70X1-MM THK)  
22. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
23. 199-4503 [1] COVER  
24. 207-1571 [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
25. 267-6798 [1] HOUSING  
26. 267-6799 [1] CARRIER-PLANETARY  
27. 267-6800 [1] GEAR-COUPLING  
28. 267-6863 B [1] SHIM (0.75-MM THK)  
  267-6864 B [1] SHIM (0.85-MM THK)  
  267-6865 B [1] SHIM (0.9-MM THK)  
  267-6866 B [1] SHIM (0.95-MM THK)  
  267-6867 B [1] SHIM (1.2-MM THK)  
  267-6868 B [1] SHIM (1.4-MM THK)  
  267-6869 B [1] SHIM (1.8-MM THK)  
  267-6870 B [1] SHIM (2-MM THK)  
  267-6871 B [1] SHIM (2.3-MM THK)  
37. 296-6248 [3] BEARING AS-ROLLER  
38. 333-2914 [2] BALL BEARING  
39. 333-2916 [3] BEARING AS  
40. 333-2917 [6] BEARING AS  
41. 367-8276 [1] HOUSING-MOTOR  
42. 093-1731 [2] RING-RETAINING  
43. 095-0891 [6] PIN-SPRING  
44. 096-0433 [3] RING-RETAINING  
45. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
46. 171-9298 [1] SEAL-O-RING  
47. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
48. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
49. 7M-8485 [2] SEAL-O-RING  
50. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
51. 7Y-5217 M [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
52. 8T-3282 [16] WASHER-HARD (22X35X3.5-MM THK)  
53. 451-2176 [16] WASHER-HARD (22X35X3.5-MM THK)  
54. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Caterpillar Parts SIS Catalog 330D2 L :

WIRING GP-CONSOLE
466-1862 WIRING GP-CONSOLE
466-1861 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
478-5174 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
477-9419 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
473-9339 WIRING GP-COMMUNICATION
WIRING GP-CHASSIS
481-3344 WIRING GP-CHASSIS
WIRING GP-CHASSIS
477-2392 WIRING GP-CHASSIS
WIRING GP-CAMERA
306-8720 WIRING GP-CAMERA
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
WIRING GP-ENGINE
395-0113 WIRING GP-ENGINE
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
WIRING GP-PLATFORM
472-7637 WIRING GP-PLATFORM
WIRING GP-PLATFORM
472-7637 WIRING GP-PLATFORM
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
353-0492 DRIVE GP-FINAL