AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

238-1570 WIRING GP-REFUELING PUMP S/N DNS1-UP PART OF 229-1784 PUMP AR-FUEL TRANSFER 320D2 L EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 320D2 L EXCAVATOR DNS
 320D2 & 320D2 L Excavator DNS00001-UP (MACHINE) POWERED BY C7.1 Engine SEBP7592 320D2 L DNS   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-PLATFORM
472-7637 WIRING GP-PLATFORM
WIRING GP-PLATFORM
472-7637 WIRING GP-PLATFORM
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
 

#SEBP75920230
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N DNS1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
i03161283 SEBP7592
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75920231
 

333-2988: DRIVE GP-FINAL

333-2988 DRIVE GP-FINAL -WITHOUT MOTOR
S/N DNS1-UP; TDZ1-UP
PART OF 441-3013 DRIVE GP-FINAL
i06256864 SEBP7592
3332988 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0580 [1] PLATE (10-MM THK)  
2. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
3. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
12. 114-1539 [6] PIN-DOWEL  
13. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
14. 174-4874 [1] SEAL GP-DUO-CONE  
15. 333-2989 [1] GEAR-SUN (12-TEETH)  
16. 333-2990 [1] GEAR-SUN (18-TEETH)  
17. 333-2991 [3] GEAR-PLANETARY (38-TEETH)  
18. 333-2992 [3] GEAR-PLANETARY (35-TEETH)  
19. 333-2993 [3] SHAFT  
20. 333-2994 [3] SHAFT  
21. 333-2995 [1] CARRIER-PLANETARY  
22. 333-2996 [1] CARRIER-PLANETARY  
23. 333-2998 [1] HOUSING  
24. 353-0612 [1] HOUSING-MOTOR  
25. 457-7976 [1] COVER  
26. 457-7977 [1] GEAR-RING (90-TEETH)  
27. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
28. 095-0891 [6] PIN-SPRING  
29. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
30. 143-0811 M [16] BOLT (12X1.75X35-MM)  
31. 165-5785 [1] SPACER (40X60.9X1-MM THK)  
32. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
33. 296-6220 [2] BALL BEARING  
34. 296-6268 [6] BEARING AS-ROLLER  
35. 346-5215 [3] BEARING AS  
36. 3E-2338 [2] PLUG-PIPE  
37. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 6D-0692 [1] SEAL-O-RING  
39. 7M-8485 [2] SEAL-O-RING  
40. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
41. 8T-0348 M [28] BOLT-SOCKET HEAD (M16X2X50-MM)  
42. 9X-8268 [28] WASHER (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP75920232
 

441-3011: DRIVE GP-FINAL

441-3011 DRIVE GP-FINAL
S/N DNS1-UP; TDZ1-UP
WITH MOTOR, SPROCKET
PART OF 267-6767 POWER TRAIN AR
Type 1
i06256858 SEBP7592
4413011 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-3042 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 441-3013 Y [1] DRIVE GP-FINAL (WITH MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75920233
 

441-3011: DRIVE GP-FINAL

441-3011 DRIVE GP-FINAL
S/N DNS1-UP; TDZ1-UP
WITH MOTOR, SPROCKET
PART OF 267-6767 POWER TRAIN AR
Type 2
i06830150 SEBP7592
4413011 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-3042 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 480-6767 CY [1] DRIVE GP-FINAL (WITH MOTOR)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP75920234
 

441-3011: DRIVE GP-FINAL

441-3011 DRIVE GP-FINAL
S/N DNS1-UP; TDZ1-UP
WITH MOTOR, SPROCKET
PART OF 267-6767 POWER TRAIN AR
Type 3
i06991207 SEBP7592
4413011 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-3042 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 499-0029 CY [1] DRIVE GP-FINAL (WITH MOTOR)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP75920235
 

441-3013: DRIVE GP-FINAL

441-3013 DRIVE GP-FINAL -WITH MOTOR
S/N DNS1-UP; TDZ1-UP
PART OF 441-3011 DRIVE GP-FINAL
i06256855 SEBP7592
4413013 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 333-2988 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
2. 334-9986 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75920236
 

480-6767: DRIVE GP-FINAL

480-6767 DRIVE GP-FINAL -WITH MOTOR
S/N DNS1-UP; TDZ1-UP
PART OF 441-3011 DRIVE GP-FINAL
i06830148 SEBP7592
4806767 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 334-9986 Y [1] MOTOR & MTG GP-TRAVEL  
2. 480-6768 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75920237
 

480-6768: DRIVE GP-FINAL

480-6768 DRIVE GP-FINAL -WITHOUT MOTOR
S/N DNS1-UP; TDZ1-UP
PART OF 480-6767 DRIVE GP-FINAL
i06730736 SEBP7592
4806768 DRIVE GP-FINAL Parts scheme 4806768 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0580 [1] PLATE (10-MM THK)  
2. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
3. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
12. 114-1539 [6] PIN-DOWEL  
13. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
14. 174-4874 [1] SEAL GP-DUO-CONE  
15. 333-2989 [1] GEAR-SUN (12-TEETH)  
16. 333-2990 [1] GEAR-SUN (18-TEETH)  
17. 333-2991 [3] GEAR-PLANETARY (38-TEETH)  
18. 333-2992 [3] GEAR-PLANETARY (35-TEETH)  
19. 333-2993 [3] SHAFT  
20. 333-2994 [3] SHAFT  
21. 333-2995 [1] CARRIER-PLANETARY  
22. 333-2996 [1] CARRIER-PLANETARY  
23. 333-2998 [1] HOUSING  
24. 353-0612 [1] HOUSING-MOTOR  
25. 457-7977 [1] GEAR-RING (90-TEETH)  
26. 480-6771 [1] COVER  
27. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
28. 095-0891 [6] PIN-SPRING  
29. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
30. 143-0811 M [16] BOLT (12X1.75X35-MM)  
31. 165-5785 [1] SPACER (40X60.9X1-MM THK)  
32. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
33. 296-6220 [2] BALL BEARING  
34. 296-6268 [6] BEARING AS-ROLLER  
35. 346-5215 [3] BEARING AS  
36. 3E-2338 [2] PLUG-PIPE  
37. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 6D-0692 [1] SEAL-O-RING  
39. 7M-8485 [2] SEAL-O-RING  
40. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
41. 8T-0348 M [28] BOLT-SOCKET HEAD (M16X2X50-MM)  
42. 9X-8268 [28] WASHER (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP75920238
 

499-0029: DRIVE GP-FINAL

499-0029 DRIVE GP-FINAL -WITH MOTOR
S/N DNS1-UP; TDZ1-UP
PART OF 441-3011 DRIVE GP-FINAL
i06991213 SEBP7592
4990029 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 334-9986 Y [1] MOTOR & MTG GP-TRAVEL  
2. 499-0030 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75920239
 

499-0030: DRIVE GP-FINAL

499-0030 DRIVE GP-FINAL -WITHOUT MOTOR
S/N DNS1-UP; TDZ1-UP
PART OF 499-0029 DRIVE GP-FINAL
i06861695 SEBP7592
4990030 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0580 [1] PLATE (10-MM THK)  
2. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
3. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
12. 114-1539 [6] PIN-DOWEL  
13. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
14. 174-4874 [1] SEAL GP-DUO-CONE  
15. 333-2989 [1] GEAR-SUN (12-TEETH)  
16. 333-2990 [1] GEAR-SUN (18-TEETH)  
17. 333-2991 [3] GEAR-PLANETARY (38-TEETH)  
18. 333-2992 [3] GEAR-PLANETARY (35-TEETH)  
19. 333-2993 [3] SHAFT  
20. 333-2994 [3] SHAFT  
21. 333-2995 [1] CARRIER-PLANETARY  
22. 333-2996 [1] CARRIER-PLANETARY  
23. 333-2998 [1] HOUSING  
24. 353-0612 [1] HOUSING-MOTOR  
25. 457-7977 [1] GEAR-RING (90-TEETH)  
26. 480-6771 [1] COVER  
27. 498-9005 [1] GASKET  
28. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
29. 095-0891 [6] PIN-SPRING  
30. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
31. 143-0811 M [16] BOLT (12X1.75X35-MM)  
32. 165-5785 [1] SPACER (40X60.9X1-MM THK)  
33. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
34. 296-6220 [2] BALL BEARING  
35. 296-6268 [6] BEARING AS-ROLLER  
36. 346-5215 [3] BEARING AS  
37. 3E-2338 [2] PLUG-PIPE  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 6D-0692 [1] SEAL-O-RING  
40. 7M-8485 [2] SEAL-O-RING  
41. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
42. 8T-0348 M [28] BOLT-SOCKET HEAD (M16X2X50-MM)  
43. 9X-8268 [28] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Caterpillar Parts SIS Catalog 320D2 L :

WIRING GP-PLATFORM
472-7637 WIRING GP-PLATFORM
WIRING GP-PLATFORM
472-7637 WIRING GP-PLATFORM
WIRING GP-PLATFORM
398-7004 WIRING GP-PLATFORM
WIRING GP-HYDRAULIC CONTROL
479-1421 WIRING GP-HYDRAULIC CONTROL
WIRING GP-FINE SWING
259-5052 WIRING GP-FINE SWING
WIRING GP-ENGINE
369-0249 WIRING GP-ENGINE
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-CONTROL
477-4996 WIRING GP-CONTROL
DRIVE GP-FINAL
333-2988 DRIVE GP-FINAL
DRIVE GP-FINAL
441-3011 DRIVE GP-FINAL
DRIVE GP-FINAL
441-3011 DRIVE GP-FINAL
DRIVE GP-FINAL
441-3011 DRIVE GP-FINAL
DRIVE GP-FINAL
441-3013 DRIVE GP-FINAL
DRIVE GP-FINAL
480-6767 DRIVE GP-FINAL
DRIVE GP-FINAL
480-6768 DRIVE GP-FINAL
DRIVE GP-FINAL
499-0029 DRIVE GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.