AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

453-6677 CYLINDER AR-BOOM S/N YCA1-UP PART OF 483-8066, 490-0766, 502-5827, 502-5831, 507-5718, 507-5722, 526-3299, 526-3301 DISTRIBUTION AR 325F LCR


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 325F LCR EXCAVATOR XAA
 325F L Excavators XAA00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP7594 325F LCR XAA   (2013)

HYDRAULIC SYSTEM

CYLINDER GP
450-9254 CYLINDER AR-BOOM
450-9255 CYLINDER AR-BOOM
453-6677 CYLINDER AR-BOOM
CYLINDER GP-BUCKET
575-1074 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
390-9505 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
360-5447 CYLINDER GP-HYDRAULIC
 

#SEBP75940530
 

453-6677: CYLINDER AR-BOOM

453-6677 CYLINDER AR-BOOM
S/N YCA1-UP
PART OF 483-8066, 490-0766, 502-5827, 502-5831, 507-5718, 507-5722, 526-3299, 526-3301 DISTRIBUTION AR
i06269719 SEBP7594
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  453-6678 Y [1] CYLINDER & LINES GP (LH)  
  453-6679 Y [1] CYLINDER & LINES GP (RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75940531
 

575-1074: CYLINDER GP-BUCKET

575-1074 CYLINDER GP-BUCKET
S/N XAA1-UP; YCA1-UP
120-MM (4.7-IN) BORE X 1104-MM (43.5-IN) STROKE
PART OF 356-8787 CYLINDER & SEAL GP-BUCKET
i07741235 SEBP7594
5751074 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5510 J [1] RING  
2. 095-1267 M [2] SETSCREW-SOCKET (M10X1.5-THD)  
3. 095-1717 J [1] SEAL-O-RING  
4. 102-2244 [1] GROMMET  
5. 114-0756 [1] BUSHING  
6. 126-2043 [1] HEAD  
7. 158-9063 J [2] RING  
8. 165-9286 J [1] SEAL-LIP TYPE  
9. 179-9674 J [1] RING  
10. 188-2199 [1] SEAL-O-RING  
11. 212-0907 [1] PLATE-CONNECTOR  
12. 215-1942 [1] RING-BACKUP  
13. 217-3312 [1] MAGNET  
14. 357-5257 [1] COVER  
15. 246-9113 [1] RETAINER  
16. 355-5818 J [1] SEAL-BUFFER  
17. 355-5820 J [1] SEAL-U-CUP  
18. 356-7529 [1] SENSOR GP-POSITION (LINEAR)(BUCKET CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
19. 357-0756 [1] PISTON  
20. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
21. 3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
22. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
23. 486-4636 [1] ROD AS  
24. 486-6322 [1] CYLINDER AS  
25. 495-8191 J [1] SEAL AS  
26. 6V-8223 M [1] SETSCREW-SOCKET (M10X1.5X16-MM)  
27. 7Y-5116 J [1] RING  
28. 7Y-5119 [1] RING-RETAINING  
29. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
30. 8T-8737 [1] PLUG-SEAL  
31. 8T-8894 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
32. 9X-1386 E SLEEVE (9-CM)  
32A. 9X-1386 E SLEEVE (7-CM)  
   
    AVAILABLE REPAIR KIT(S):
  545-6415 J [1] KIT-SEAL  
    (ALSO INCLUDES RING SEAL)
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP75940532
 

390-9505: CYLINDER GP-COUPLER

390-9505 CYLINDER GP-COUPLER
S/N XAA1-UP
63.5-MM (2.5-IN) BORE X 116.8-MM (4.6-IN) STROKE
PART OF 388-0067 COUPLER GP-QUICK
i05859647 SEBP7594
3909505 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-0947 J [1] VALVE GP-CHECK (PILOT OPERATED)  
2. 3J-1907 [1] SEAL-O-RING  
3. 3J-7354 [1] SEAL-O-RING  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 9S-8004 [1] PLUG (9/16-18-THD)  
6. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
   
    AVAILABLE REPAIR KIT(S):
  213-8433 J [1] KIT-SEAL (CHECK VALVE)  
  453-6523 [1] KIT-PACKING (COUPLER CYLINDER)  
    (INCLUDES O-RINGS,SEALS & POLYPAK)
  J   KIT MARKED J SERVICES PART(S)MARKED J
 

#SEBP75940533
 

360-5447: CYLINDER GP-HYDRAULIC

360-5447 CYLINDER GP-HYDRAULIC -VARIABLE ADJUSTABLE BOOM
S/N YCA1-UP
160-MM (6.3-IN) BORE X 1050-MM (41.3-IN) STROKE
PART OF 279-8709 CYLINDER & SEAL GP-HYDRAULIC
i05760962 SEBP7594
3605447 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6088 [1] HEAD  
2. 7Y-4622 [1] LOCKNUT (SPECIAL)  
3. 7Y-4631 [1] RING-RETAINING  
4. 087-5005 [1] STOP  
5. 103-8379 [1] RING  
6. 106-9595 [1] STOP  
7. 165-9288 J [1] SEAL-LIP TYPE  
8. 372-2151 C [1] SEAL-BUFFER  
9. 185-0592 [1] PISTON  
10. 247-8829 J [1] RING-SEAL  
11. 323-3838 C [1] CYLINDER AS-HYDRAULIC  
11A. 290-9182 [1] BUSHING  
12. 360-5446 [1] ROD AS  
12A. 290-9182 [1] BUSHING  
13. 087-5550 J [1] RING-BACKUP  
14. 095-0929 J [2] RING-RETAINING  
15. 095-1635 J [1] SEAL-O-RING  
16. 103-8378 [1] RING-RETAINING  
17. 185-0230 J [2] RING  
18. 185-0231 J [1] RING  
19. 372-2152 C [1] SEAL-U-CUP  
20. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
21. 5M-6214 [1] PLUG (1/8-27 PTF)  
22. 6C-6093 [1] BUSHING  
23. 7Y-4628 J [1] RING (BACKUP)  
24. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
25. 9X-3604 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  362-9412 J [1] KIT-SEAL (CYLINDER)(VARIABLE ADJUSTABLE BOOM)  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP75940534
 

451-2916: DRIVE & MTG GP-SWING

451-2916 DRIVE & MTG GP-SWING
S/N XAA1-UP; YCA1-UP
PART OF 451-2915 POWER TRAIN AR
i06273355 SEBP7594
4512916 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5503 [2] CORK  
2. 201-7949 M [12] BOLT (M24X3X70-MM)  
3. 6V-8237 [12] WASHER (26X44X4-MM THK)  
4. 451-2917 Y [1] DRIVE GP-SWING (WITH MOTOR)  
5. 451-7656 [1] SUPPORT  
6. 096-4755 [1] PIN  
7. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
8. 122-8705 M [1] U-BOLT (M10X1.5-MM THD)  
9. 5D-1026 [1] CLAMP-BAND  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
12. 5P-0767 HOSE (80-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75940535
 

560-2471: DRIVE & MTG GP-SWING

560-2471 DRIVE & MTG GP-SWING
S/N XAA1-UP; YCA1-UP
PART OF 451-2915 POWER TRAIN AR
i07621789 SEBP7594
5602471 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-4755 [1] PIN  
2. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
3. 122-8705 M [1] U-BOLT (M10X1.5-MM THD)  
4. 2Y-5503 [2] CORK  
5. 451-7656 [1] SUPPORT  
6. 201-7949 M [12] BOLT (M24X3X70-MM)  
7. 558-7675 Y [1] DRIVE GP-SWING  
8. 5D-1026 [1] CLAMP-BAND  
9. 6V-8237 [12] WASHER (26X44X4-MM THK)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
12. 5P-0767 E HOSE (80-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75940536
 

451-2917: DRIVE GP-SWING

451-2917 DRIVE GP-SWING -WITH MOTOR
S/N XAA1-UP; YCA1-UP
PART OF 451-2916 DRIVE & MTG GP-SWING
i06273512 SEBP7594
4512917 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-2421 [1] CONNECTOR AS  
  6V-9746 [1] SEAL-O-RING  
  8C-6874 [1] CONNECTOR  
2. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  267-6785 [1] PIPE  
3. 451-6895 [1] PIPE AS  
4. 451-6898 [1] GAUGE-OIL LEVEL  
5. 466-3555 Y [1] DRIVE GP-SWING  
6. 467-1393 Y [1] MOTOR & MTG GP-SWING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP75940537
 

466-3555: DRIVE GP-SWING

466-3555 DRIVE GP-SWING
S/N XAA1-UP; YCA1-UP
PART OF 451-2917 DRIVE GP-SWING
i06277833 SEBP7594
4663555 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7238 [1] VALVE-SHUTOFF (FUEL)  
2. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
3. 148-4636 [1] SHAFT-PINION  
4. 148-4640 [1] RING-RETAINING  
5. 171-9383 [1] SPACER  
6. 199-4561 [2] SEAL-LIP TYPE  
7. 227-6228 [1] CAGE  
8. 346-5215 [3] BEARING AS  
9. 367-8364 [1] GEAR-SUN (20-TEETH)  
10. 367-8365 [3] GEAR-PLANETARY (26-TEETH)  
11. 367-8367 [2] RING-RETAINING  
12. 367-8368 [1] GEAR-SUN (23-TEETH)  
13. 367-8369 [3] GEAR-PLANETARY (25-TEETH)  
14. 378-9513 [3] SHAFT  
15. 378-9514 [1] CARRIER-PLANETARY  
16. 378-9515 [1] GEAR-RING (73-TEETH)  
17. 378-9516 [1] HOUSING  
18. 378-9609 [1] CARRIER AS  
19. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 453-3447 M [6] BOLT (M12X1.75X40-MM)  
21. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
22. 509-6676 [3] PIN-SPRING  
23. 095-1022 [1] BEARING-ROLLER  
24. 148-4642 [1] SEAL-O-RING  
25. 148-4643 [1] BEARING  
26. 296-6268 [6] BEARING AS-ROLLER  
27. 3K-0360 [1] SEAL-O-RING  
28. 7I-7623 [1] SPACER (52X69.5X6-MM THK)  
29. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
30. 8T-0348 M [16] BOLT-SOCKET HEAD (M16X2X50-MM)  
31. 8T-4240 [3] RING-RETAINING  
32. 9X-8268 [16] WASHER (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP75940538
 

558-7675: DRIVE GP-SWING

558-7675 DRIVE GP-SWING -WITH MOTOR
S/N XAA1-UP; YCA1-UP
PART OF 560-2471 DRIVE & MTG GP-SWING
i07621860 SEBP7594
5587675 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5200 [1] RING-RETAINING  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 184-2421 [1] CONNECTOR AS  
  6V-9746 [1] SEAL-O-RING  
  8C-6874 [1] CONNECTOR  
4. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
5. 451-2182 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 451-6895 [1] PIPE AS  
7. 451-6898 [1] GAUGE-OIL LEVEL  
8. 453-3446 M [12] BOLT (M12X1.75X35-MM)  
9. 465-5180 Y [1] MOTOR GP-SWING  
10. 3K-0360 [1] SEAL-O-RING  
11. 558-7677 [1] DRIVE GP-SWING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP75940539
 

451-5230: FILTER & LINES GP-HYDRAULIC

451-5230 FILTER & LINES GP-HYDRAULIC
S/N XAA1-UP; YCA1-UP
PART OF 451-5229 TANK & MTG GP-HYDRAULIC
i06271740 SEBP7594
4515230 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325F LCR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 451-5231 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 451-5232 Y [1] FILTER & LINES GP-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 325F LCR :

450-9255 CYLINDER AR-BOOM
450-9254 CYLINDER AR-BOOM
341-2787 CYLINDER AR-BOOM
CYLINDER & SEAL GP-STICK
341-2802 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-HYDRAULIC
279-8709 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-BUCKET
356-8787 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
341-2818 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
341-2814 CYLINDER & SEAL GP-BUCKET
CYLINDER GP-BUCKET
575-1074 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
390-9505 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
360-5447 CYLINDER GP-HYDRAULIC
DRIVE & MTG GP-SWING
451-2916 DRIVE & MTG GP-SWING
DRIVE & MTG GP-SWING
560-2471 DRIVE & MTG GP-SWING
DRIVE GP-SWING
451-2917 DRIVE GP-SWING
DRIVE GP-SWING
466-3555 DRIVE GP-SWING
DRIVE GP-SWING
558-7675 DRIVE GP-SWING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.