AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

417-2659 CYLINDER GP-BUCKET S/N JEE1-UP 150-MM (5.9-IN) BORE X 1151-MM (45.3-IN) STROKE PART OF 417-2658 CYLINDER & SEAL GP-BUCKET 340D2 L


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 340D2 L EXCAVATOR JEE
 340D2 L Excavator JEE00001-UP (MACHINE) POWERED BY C9 Engine SEBP7596 340D2 L JEE   (2015)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
357-9766 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
417-2659 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
417-2661 CYLINDER GP-BUCKET
CYLINDER GP-STICK
375-1722 CYLINDER GP-STICK
CYLINDER GP-STICK
417-2657 CYLINDER GP-STICK
 

#SEBP75960330
 

417-2659: CYLINDER GP-BUCKET

417-2659 CYLINDER GP-BUCKET
S/N JEE1-UP
150-MM (5.9-IN) BORE X 1151-MM (45.3-IN) STROKE
PART OF 417-2658 CYLINDER & SEAL GP-BUCKET
i05350712 SEBP7596
4172659 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-9290 J [1] SEAL-LIP TYPE  
2. 188-4217 J [2] RING  
3. 188-4218 J [1] RING  
4. 266-7959 J [1] SEAL-O-RING  
5. 357-9767 [1] CYLINDER AS  
5A. 290-9180 [1] BUSHING  
6. 357-9776 [1] ROD AS  
6A. 228-5617 [1] BUSHING  
7. 358-8523 [1] PISTON  
8. 358-8524 [1] HEAD  
9. 114-0760 [1] BUSHING  
10. 259-0733 J [1] SEAL-U-CUP  
11. 266-7956 J [1] SEAL-BUFFER  
12. 7Y-4669 J [1] RING-BACKUP  
13. 7Y-4672 [1] RING-RETAINING  
14. 7Y-4673 J [1] RING-BACKUP  
15. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
16. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
17. 495-8212 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  519-7965 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP75960331
 

417-2661: CYLINDER GP-BUCKET

417-2661 CYLINDER GP-BUCKET
S/N JEE1-UP
160-MM (6.3-IN) BORE X 1356-MM (53.4-IN) STROKE
PART OF 417-2660 CYLINDER & SEAL GP-BUCKET
i05421657 SEBP7596
4172661 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-2112 M [1] LOCKNUT-SPECIAL (M90X2-THD)  
2. 266-7960 J [1] SEAL-O-RING  
3. 357-9785 [1] CYLINDER AS  
3A. 290-9182 [1] BUSHING  
4. 357-9794 [1] ROD AS  
4A. 087-5548 [1] BUSHING  
5. 358-8527 [1] PISTON  
6. 358-8528 [1] HEAD  
7. 087-5550 J [1] RING-BACKUP  
8. 114-0762 [1] BUSHING  
9. 165-9291 J [1] SEAL-LIP TYPE  
10. 185-0230 J [2] RING  
11. 185-0231 J [1] RING  
12. 259-0734 J [1] SEAL-U-CUP  
13. 266-7957 J [1] SEAL-BUFFER  
14. 7Y-4941 J [1] RING-BACKUP  
15. 7Y-4944 [1] RING-RETAINING  
16. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
17. 506-2321 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  519-7967 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP75960332
 

375-1722: CYLINDER GP-STICK

375-1722 CYLINDER GP-STICK
S/N JEE1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 357-4702 CYLINDER & SEAL GP-STICK
i05419989 SEBP7596
3751722 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4956 M [1] LOCKNUT (M90X2-THD)  
2. 103-8345 [1] RING-RETAINING  
3. 107-6579 [1] RING  
4. 191-5644 [1] BUSHING  
5. 191-5648 J [1] SEAL-LIP TYPE  
6. 231-6843 J [1] RING-SEAL  
7. 324-9484 J [1] SEAL-BUFFER  
8. 324-9486 J [1] SEAL-U-CUP  
9. 357-4704 [1] CYLINDER AS  
9A. 290-9183 [1] BUSHING  
10. 357-4713 [1] ROD AS  
10A. 290-9183 [1] BUSHING  
11. 358-8525 [1] PISTON  
12. 375-1723 [1] HEAD  
13. 359-7188 [1] STOP  
14. 359-7192 [1] STOP  
15. 095-0930 [2] RING-RETAINING (EXTERNAL)  
16. 140-0240 J [1] SEAL-O-RING  
17. 191-5604 J [2] RING  
18. 191-5605 J [1] RING  
19. 191-5643 [1] RING-RETAINING  
20. 191-5647 J [1] RING-BACKUP  
21. 375-1732 J [2] RING-BACKUP  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
23. 506-2322 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  518-5137 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP75960333
 

417-2657: CYLINDER GP-STICK

417-2657 CYLINDER GP-STICK
S/N JEE1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 417-2656 CYLINDER & SEAL GP-STICK
i05350661 SEBP7596
4172657 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4956 M [1] LOCKNUT (M90X2-THD)  
2. 103-8345 [1] RING-RETAINING  
3. 107-6579 [1] RING  
4. 191-5648 J [1] SEAL-LIP TYPE  
5. 231-6843 J [1] RING-SEAL  
6. 357-4704 [1] CYLINDER AS  
6A. 290-9183 [1] BUSHING  
7. 357-4713 [1] ROD AS  
7A. 290-9183 [1] BUSHING  
8. 358-8525 [1] PISTON  
9. 359-7188 [1] STOP  
10. 359-7192 [1] STOP  
11. 375-1723 [1] HEAD  
12. 375-1732 J [2] RING-BACKUP  
13. 420-1751 J [1] SEAL-O-RING  
14. 095-0930 [2] RING-RETAINING (EXTERNAL)  
15. 191-5604 J [2] RING  
16. 191-5605 J [1] RING  
17. 191-5643 [1] RING-RETAINING  
18. 191-5644 [1] BUSHING  
19. 191-5647 J [1] RING-BACKUP  
20. 259-0735 J [1] SEAL-U-CUP  
21. 259-0773 J [1] SEAL-BUFFER  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
23. 506-2322 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  519-7966 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP75960334
 

378-9558: DRIVE GP-SWING

378-9558 DRIVE GP-SWING -WITHOUT MOTOR
S/N JEE1-UP
PART OF 447-2485 DRIVE GP-SWING
i05968658 SEBP7596
3789558 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 7I-7611 [1] CAGE  
4. 7I-7619 [1] BEARING-ROLLER  
5. 9U-8693 [1] BEARING-ROLLER  
6. 094-1528 [6] WASHER (53X84X1-MM THK)  
7. 110-7149 [1] RING-RETAINING  
8. 114-1322 [1] RING-RETAINING  
9. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
10. 114-1399 [1] PIPE-GAUGE  
11. 127-3872 I [1] HOSE AS  
12. 148-4605 [1] SHAFT-PINION  
13. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
14. 227-6215 [1] BOSS (1/4-18-THD)  
15. 296-6269 [3] BEARING-ROLLER  
16. 453-1671 [1] CARRIER-PLANETARY  
17. 378-9524 [4] SHAFT  
18. 378-9525 [8] WASHER (62.3X104X1-MM THK)  
19. 378-9526 [1] GEAR-RING (67-TEETH)  
20. 378-9527 [4] GEAR-PLANETARY (24-TEETH)  
21. 378-9528 [3] GEAR-PLANETARY (24-TEETH)  
22. 378-9529 [1] GEAR-SUN (13-TEETH)  
23. 378-9530 [1] GEAR-SUN (17-TEETH)  
24. 378-9531 [1] CARRIER AS  
25. 378-9535 [1] HOUSING  
26. 378-9560 [1] COVER-HOUSING  
27. 378-9593 [8] BEARING AS  
28. 093-1730 [1] RING-RETAINING  
29. 095-0927 [3] RING-RETAINING  
30. 096-1441 [1] RING-RETAINING  
31. 510-1989 [4] PIN-SPRING  
32. 128-9170 [2] SEAL-LIP TYPE  
33. 136-2803 [2] CLIP  
34. 3K-0360 [1] SEAL-O-RING  
35. 5M-4454 [1] SEAL-O-RING  
36. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
37. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
38. 8T-0348 M [24] BOLT-SOCKET HEAD (M16X2X50-MM)  
39. 453-3447 M [22] BOLT (M12X1.75X40-MM)  
40. 451-2182 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
43. 451-2175 [24] WASHER-HARD (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP75960335
 

447-2485: DRIVE GP-SWING

447-2485 DRIVE GP-SWING -WITH MOTOR
S/N JEE1-UP
PART OF 486-7850 POWER TRAIN AR
i05968632 SEBP7596
4472485 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-3372 Y [1] MOTOR & MTG GP-SWING  
2. 378-9558 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP75960336
 

191-2577: FASTENER GP-SWING & FINAL DR

191-2577 FASTENER GP-SWING & FINAL DR
S/N JEE1-UP
PART OF 486-7850 POWER TRAIN AR
i01676347 SEBP7596
1912577 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 461-3883 M [40] BOLT (M24X3X80-MM)  
2. 6V-8237 [63] WASHER (26X44X4-MM THK)  
3. 461-3882 M [23] BOLT (M24X3X70-MM)  
4. 5D-1026 [1] CLAMP-BAND  
5. 5P-0767 E HOSE (90-CM)  
6. 2B-7561 [2] CORK  
7. 096-4755 [1] PIN  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP75960337
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N JEE1-UP
PART OF 453-2702 TANK & FILTER GP-HYDRAULIC
i02998214 SEBP7596
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 C [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 C [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP75960338
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N JEE1-UP
PART OF 453-2702 TANK & FILTER GP-HYDRAULIC
i05426091 SEBP7596
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 7Y-7389 M [4] SCREW (M5X0.8X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP75960339
 

289-8194: FILTER GP-OIL

289-8194 FILTER GP-OIL -HYDRAULIC, CASE DRAIN
S/N JEE1-UP
PART OF 453-2702 TANK & FILTER GP-HYDRAULIC
i02753994 SEBP7596
2898194 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 340D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-7521 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, CASE DRAIN)  
2. 289-8195 [1] HEAD AS-FILTER  
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Boom Lines
336D2 and 340D2 Excavators Machine System
Bucket Cylinder
336D2 and 340D2 Excavators Machine System
Bucket Cylinder
336D2 and 340D2 Excavators Machine System
Stick Cylinder
336D2 and 340D2 Excavators Machine System
Boom Cylinder
336D2 and 340D2 Excavators Machine System
Boom Cylinder Lines
336D2 and 340D2 Excavators Machine System
Boom Cylinder Lines
336D2 and 340D2 Excavators Machine System
Systems Operation
Cylinders (Boom, Stick and Bucket)
336D2 and 340D2 Excavators Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
336D2 and 340D2 Excavators Hydraulic System
Cylinder Speed - Check
336D2 and 340D2 Excavators Hydraulic System
Cylinder Drift - Check - Loaded Bucket
336D2 and 340D2 Excavators Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Stick Cylinder - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Boom Cylinder - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}
New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}
Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5458}
Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5458}

Caterpillar Parts SIS Catalog 340D2 L :

CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9766 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
417-2655 CYLINDER GP-BOOM
CYLINDER GP-BOOM
358-5972 CYLINDER GP-BOOM
CYLINDER & SEAL GP-STICK
417-2656 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
357-4702 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-BUCKET
417-2660 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
417-2658 CYLINDER & SEAL GP-BUCKET
CYLINDER GP-BUCKET
417-2661 CYLINDER GP-BUCKET
CYLINDER GP-STICK
375-1722 CYLINDER GP-STICK
CYLINDER GP-STICK
417-2657 CYLINDER GP-STICK
DRIVE GP-SWING
378-9558 DRIVE GP-SWING
DRIVE GP-SWING
447-2485 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
191-2577 FASTENER GP-SWING & FINAL DR
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER GP-OIL
188-4140 FILTER GP-OIL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.