ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP75980270
477-9422: WIRING GP-COMMUNICATION
477-9422 WIRING GP-COMMUNICATION
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 470-6025, 481-3373 INSTALLATION AR-COMMUNICATION
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 470-6025, 481-3373 INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [6] | STRAP-CABLE | |
| 2. | 4I-7889 | [1] | SPACER (11X25X45-MM THK) | |
| 3. | 7K-1181 | [21] | STRAP-CABLE | |
| 4. | 111-4836 | [1] | CLIP | |
| 5. | 116-0118 | [1] | CLIP | |
| 6. | 143-9397 M | [3] | SCREW-PAN HEAD (M4X0.7X12-MM) | |
| 7. | 486-7098 | [1] | HARNESS AS-CONTROL | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.1-M) | |||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM) | |||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 8. | 500-4204 | [1] | CABLE AS | |
| 9. | 096-2626 | [3] | CLIP | |
| 10. | 479-3260 | [3] | WASHER (5.5X13X1.2-MM THK) | |
| 11. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP75980271
231-1836: WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE -LH
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 398-7005 WIRING GP-CONSOLE
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 398-7005 WIRING GP-CONSOLE
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 163-6795 | [2] | STRAP-CABLE | |
| 4. | 251-0580 | [1] | HARNESS AS-CONSOLE | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [9] | STRAP-CABLE | ||
| 5P-5995 D | TUBE (0.3-M) | |||
| 7Y-3963 | [2] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [2] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [11] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 247-2693 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP75980272
398-7005: WIRING GP-CONSOLE
398-7005 WIRING GP-CONSOLE
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 454-6465 OPERATOR AR
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 454-6465 OPERATOR AR
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS#SEBP75980273
398-7006: WIRING GP-CONSOLE
398-7006 WIRING GP-CONSOLE -RH
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 398-7005 WIRING GP-CONSOLE
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 398-7005 WIRING GP-CONSOLE
For full view, you need register
#SEBP75980274
350-8250: WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER -12-VOLT, 10-AMPERE
S/N HBK1-UP
PART OF 482-6473, 482-6474, 506-8828 OPTION AR-CAB
S/N HBK1-UP
PART OF 482-6473, 482-6474, 506-8828 OPTION AR-CAB
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 479-9395 | [1] | BRACKET | |
| 2. | 475-2681 | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT) | |
| 3. | 324-5771 | [2] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 4. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 6. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 7. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP75980275
397-9363: WIRING GP-ELECTRONIC CONTROL
397-9363 WIRING GP-ELECTRONIC CONTROL
S/N TXD10441-UP
PART OF 457-5115 ENGINE AR-COMPLETE
Type 1
FOR USE WITH HEP FUEL PUMP
S/N TXD10441-UP
PART OF 457-5115 ENGINE AR-COMPLETE
Type 1
FOR USE WITH HEP FUEL PUMP
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [17] | STRAP-CABLE | |
| 2. | 419-0841 Y | [1] | HARNESS AS-ENGINE (UNIT INJECTOR) | |
| 3. | 323-9140 Y | [1] | HARNESS AS-ENGINE (SPEED SENSOR) | |
| 4. | 4P-7581 | [6] | CLIP (LADDER) | |
| 5. | 4P-8134 | [2] | CLIP (LADDER) | |
| 6. | 5P-7970 M | [3] | NUT (M8X1.25-THD) | |
| 7. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 8. | 6V-5839 | [3] | WASHER (11X21X2.5-MM THK) | |
| 9. | 6V-6317 M | [3] | BOLT (M10X1.5X20-MM) | |
| 10. | 7I-2272 M | [2] | BOLT (M5X0.8X12-MM) | |
| 11. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 12. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 13. | 8T-5451 M | [1] | BOLT (M6X1X12-MM) | |
| 14. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 6V-4369 | [1] | CLIP | |
| 16. | 440-0881 M | [5] | BOLT-SOCKET HEAD (M8X1.25-THD) | |
| 17. | 439-4571 | [5] | CLIP (LOOP) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75980276
397-9363: WIRING GP-ELECTRONIC CONTROL
397-9363 WIRING GP-ELECTRONIC CONTROL
S/N TXD10441-UP
PART OF 457-5115 ENGINE AR-COMPLETE
Type 2
FOR USE WITH HEP FUEL PUMP
S/N TXD10441-UP
PART OF 457-5115 ENGINE AR-COMPLETE
Type 2
FOR USE WITH HEP FUEL PUMP
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [20] | STRAP-CABLE | |
| 2. | 7K-1181 C | [1] | STRAP-CABLE | |
| 3. | 528-6670 CY | [1] | HARNESS AS-CONTROL | |
| 4. | 546-2154 Y | [1] | HARNESS AS-CONTROL | |
| 5. | 352-3966 C | [1] | CLIP (LADDER) | |
| 6. | 439-4571 | [5] | CLIP (LOOP) | |
| 7. | 440-0881 M | [5] | BOLT-SOCKET HEAD (M8X1.25-THD) | |
| 8. | 4P-7581 C | [5] | CLIP (LADDER) | |
| 9. | 4P-8134 C | [1] | CLIP (LADDER) | |
| 10. | 5P-7970 CM | [2] | NUT (M8X1.25-THD) | |
| 11. | 6V-4369 | [1] | CLIP | |
| 12. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 13. | 6V-5839 | [3] | WASHER (11X21X2.5-MM THK) | |
| 14. | 6V-6317 M | [3] | BOLT (M10X1.5X20-MM) | |
| 15. | 7I-2272 M | [2] | BOLT (M5X0.8X12-MM) | |
| 16. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 17. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 18. | 8T-5451 M | [1] | BOLT (M6X1X12-MM) | |
| 19. | 9M-1974 C | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75980277
455-6219: WIRING GP-FUEL PUMP
455-6219 WIRING GP-FUEL PUMP
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 461-4506, 461-4509, 484-0532 CHASSIS AR
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 461-4506, 461-4509, 484-0532 CHASSIS AR
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS#SEBP75980278
269-3410: WIRING GP-HEATER
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 398-0940 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY) | |
| 3. | 224-1377 | [1] | CABLE AS | |
| 4. | 283-1226 | [1] | BRACKET AS | |
| 5. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 6. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 7. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
| 8. | 6V-4248 M | [1] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75980279
460-7496: WIRING GP-PLATFORM
460-7496 WIRING GP-PLATFORM
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 454-6465 OPERATOR AR
S/N FAJ1-UP; HBK1-UP; FBT1-UP
PART OF 454-6465 OPERATOR AR
For full view, you need register
Parts for your 336D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [9] | STRAP-CABLE | |
| 3. | 7K-1181 | [15] | STRAP-CABLE | |
| 4. | 111-4836 | [4] | CLIP | |
| 5. | 111-4839 | [2] | STRAP | |
| 6. | 116-0118 | [12] | CLIP | |
| 7. | 234-1122 | [1] | COVER | |
| 8. | 251-0299 | [1] | HARNESS AS-SWITCH (SECONDARY SHUTDOWN) | |
| 2L-8074 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 9. | 468-7754 | [1] | HARNESS AS-PLATFORM | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [27] | STRAP-CABLE | ||
| 8T-8737 | [42] | PLUG-SEAL | ||
| 102-7964 | [1] | PLUG-CONNECTOR (16-PIN) | ||
| 102-7965 | [19] | TERMINAL (FEMALE) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [27] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 116-0255 | [1] | TERMINAL-BLADE (10-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 121-1039 | [1] | TERMINAL (MALE) | ||
| 121-1168 | [2] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [30] | TERMINAL (MALE) | ||
| 125-4766 | [1] | PLUG-CONNECTOR (17-PIN) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM) | |||
| 9X-3402 | [66] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [66] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8050 | [2] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [2] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 2L-8052 | [1] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [1] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 134-3296 | [1] | HOUSING-PLUG | ||
| 134-3297 | [2] | SEAL | ||
| 9X-3401 | [22] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [22] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 153-2620 | [1] | PLUG AS-CONNECTOR (54-PIN, BLACK) | ||
| 163-6759 | [1] | SEAL | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 197-4385 | [1] | DIODE | ||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [8] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| 230-5010 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [4] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 238-2363 | [10] | TERMINAL (FEMALE) | ||
| 238-2366 | [6] | TERMINAL (MALE) | ||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 243-4508 | [2] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [2] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 342-2972 | [3] | CAP-CONNECTOR (2-PIN) | ||
| 342-2973 | [2] | CAP-CONNECTOR (3-PIN) | ||
| 342-2974 | [3] | CAP-CONNECTOR (6-PIN) | ||
| 10. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 11. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 12. | 111-4838 | [2] | CLIP | |
| 13. | 199-7854 | [1] | SPACER (11.8X20X45-MM THK) | |
| 14. | 4D-1836 | [1] | SWITCH-TOGGLE (SECONDARY SHUTDOWN) | |
| 15. | 7X-2621 M | [7] | BOLT (M10X1.5X12-MM) | |
| 16. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 17. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR WIRING HARNESS ON CERTAIN 320D, 329D, 336D, AND 340D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR WIRING HARNESS ON CERTAIN 320D, 329D, 336D, AND 340D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR WIRING HARNESS ON CERTAIN 320D, 329D, 336D, AND 340D EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
