AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

383-0154 STARTING MOTOR GP-ELECTRIC 12-VOLT PART OF 457-1442, 470-1082, 470-1085 ENGINE AR-PRIMARY AN ATTACHMENT 305E2 CR


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
SWITCH GP
WIRING GP

MINI HYD EXCAVATOR 305E2 CR MINI HYD EXCAVATOR DF5
 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine SEBP7611 305E2 CR DF5   (2015)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
383-0154 STARTING MOTOR GP-ELECTRIC
 

#SEBP76110090
 

383-0154: STARTING MOTOR GP-ELECTRIC

383-0154 STARTING MOTOR GP-ELECTRIC
12-VOLT
PART OF 457-1442, 470-1082, 470-1085 ENGINE AR-PRIMARY
AN ATTACHMENT
i04603473 SEBP7611
3830154 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 383-0179 [1] BOLT  
2. 387-9894 [1] STUD  
3. 383-0196 [1] NUT-HEX  
4. 383-0201 [1] NUT-FLANGE  
5. 383-0207 [1] WASHER  
6. 383-0589 [1] STARTING MOTOR AS  
 

#SEBP76110091
 

319-4420: SWITCH GP-ROTARY

319-4420 SWITCH GP-ROTARY -THROTTLE POSITION
PART OF 458-0690, 458-0695 WIRING GP-CONSOLE
AN ATTACHMENT
i04655678 SEBP7611
3194420 SWITCH GP-ROTARY Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
2. 9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
3. 8T-8737 [1] PLUG-SEAL  
4. 7Y-5458 M [1] NUT (M12X1-THD)  
5. 7Y-5464 [1] WASHER (12.2X15.4X0.5-MM THK)  
6. 106-0210 [1] SEAL  
  M   METRIC PART
 

#SEBP76110092
 

458-0690: WIRING GP-CONSOLE

458-0690 WIRING GP-CONSOLE -SHOVEL CRANE, CAB
PART OF 460-7542, 460-7543 CAB AR
AN ATTACHMENT
i06137206 SEBP7611
4580690 WIRING GP-CONSOLE Parts scheme 4580690 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 7K-1181 [35] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [4] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [9] RELAY AS (12-VOLT)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 158-7802 [1] SWITCH AS-ROCKER (WINDOW WASHER, WIPER)  
  111-7899 [1] GASKET  
13. 163-6795 [3] STRAP-CABLE  
14. 180-9900 [1] CAP AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  179-9392 [1] LANYARD  
15. 231-9633 [2] RESISTOR AS  
16. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
17. 266-6935 [1] RELAY AS (12-VOLT)  
18. 266-7379 [4] STRAP-CABLE  
19. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
20. 276-2332 [1] SWITCH AS-TOGGLE (LOCAL/REMOTE THROTTLE)  
  3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
21. 298-0663 [1] CLIP (LADDER)  
22. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
23. 322-8964 J [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
24. 362-3225 [1] SWITCH AS-PRESSURE (PILOT, TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
25. 364-3882 [1] BUZZER (12-VOLT)  
26. 366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
27. 367-6419 [1] HOLDER-FUSE  
28. 370-5354 [1] PLATE AS  
29. 392-2830 [1] PLATE AS  
30. 437-4852 [1] COVER  
31. 437-4853 [1] BRACKET AS  
32. 445-0000 Y [1] ELECTRONICS GP-MONITOR  
33. 458-0723 Y [1] HARNESS AS-LIGHTING (CRANE)  
34. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
35. 471-5189 Y [1] HARNESS AS-CONSOLE (MAIN)  
36. 471-5190 Y [1] HARNESS AS-CONSOLE (CRANE)  
37. 479-4292 [1] GROMMET  
38. 479-4306 [1] BRACKET AS  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
39. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
40. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
41. 132-5789 [2] CLIP (LADDER)  
42. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 204-1611 [2] STRAP (DUAL)  
44. 3J-1907 [1] SEAL-O-RING  
45. 5C-9553 M [8] BOLT (M6X1X16-MM)  
46. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
47. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
48. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
49. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
50. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
51. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
52. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
53. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
54. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
55. 8T-4970 M [2] BOLT (M6X1X14-MM)  
56. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
57. 9X-8256 [10] WASHER (6.6X12X2-MM THK)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76110093
 

458-0695: WIRING GP-CONSOLE

458-0695 WIRING GP-CONSOLE -SHOVEL CRANE, CANOPY
PART OF 460-7540, 460-7541 CANOPY AR
AN ATTACHMENT
i06137133 SEBP7611
4580695 WIRING GP-CONSOLE Parts scheme 4580695 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 7K-1181 [36] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [5] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [8] RELAY AS (12-VOLT)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 163-6795 [3] STRAP-CABLE  
13. 180-9900 [1] CAP AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  179-9392 [1] LANYARD  
14. 231-9633 [2] RESISTOR AS  
15. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
16. 266-6935 [1] RELAY AS (12-VOLT)(START)  
17. 266-7379 [3] STRAP-CABLE  
18. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
19. 276-2332 [1] SWITCH AS-TOGGLE (CAB REMOVAL)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 298-0663 [1] CLIP (LADDER)  
21. 306-9039 [1] COVER AS-PROTECTION  
22. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
23. 322-8964 [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
24. 362-3225 [1] SWITCH AS-PRESSURE (PILOT, TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
25. 364-3882 [1] BUZZER (12-VOLT)  
26. 366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
27. 367-6419 [1] HOLDER-FUSE  
28. 370-5354 [1] PLATE AS  
29. 392-2830 [1] PLATE AS  
30. 437-4852 [1] COVER  
31. 437-4853 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
32. 445-0000 [1] ELECTRONICS GP-MONITOR  
33. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
34. 471-5189 Y [1] HARNESS AS-CONSOLE (MAIN)  
35. 471-5190 Y [1] HARNESS AS-CONSOLE (CRANE)  
36. 479-4292 [1] GROMMET  
37. 479-4306 [1] BRACKET AS  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
38. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
39. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
40. 132-5789 [2] CLIP (LADDER)  
41. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
42. 3J-1907 [1] SEAL-O-RING  
43. 4P-7581 [1] CLIP (LADDER)  
44. 5C-9553 M [9] BOLT (M6X1X16-MM)  
45. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
46. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
47. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
48. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
50. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
51. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
52. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
53. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
54. 8T-4970 M [1] BOLT (M6X1X14-MM)  
55. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
56. 9X-8256 [10] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76110094
 

458-0698: WIRING GP-ENGINE

458-0698 WIRING GP-ENGINE -CAB
PART OF 460-7542, 460-7543 CAB AR
AN ATTACHMENT
i06137204 SEBP7611
4580698 WIRING GP-ENGINE Parts scheme 4580698 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 [14] STRAP-CABLE  
3. 7K-1181 [15] STRAP-CABLE  
4. 266-7379 [2] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 326-9726 [1] BASE-MOUNTING  
7. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
8. 465-6073 [1] BRACKET  
9. 465-6074 [1] BRACKET  
10. 471-5192 Y [1] HARNESS AS-ENGINE  
11. 471-5195 [1] BRACKET AS  
  [1] BRACKET  
12. 477-1182 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 096-2626 [1] CLIP  
14. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
15. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
16. 132-5789 [4] CLIP (LADDER)  
17. 132-7551 [1] SPACER (11X19X6-MM THK)  
18. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
19. 156-6175 [7] CLIP (LADDER)  
20. 204-1611 [1] STRAP (DUAL)  
21. 310-1898 [1] CLIP (LADDER)  
22. 352-3964 [1] CLIP (LADDER)  
23. 4P-7581 [1] CLIP (LADDER)  
24. 4P-8134 [1] CLIP (LADDER)  
25. 5C-2890 M [1] NUT (M6X1-THD)  
26. 5C-8312 M [4] NUT (M4X0.7-THD)  
27. 5C-9553 M [6] BOLT (M6X1X16-MM)  
28. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
29. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
30. 7C-4354 [6] CLIP  
31. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
33. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
34. 8T-4138 M [2] BOLT (M6X1X20-MM)  
35. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
36. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
37. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
38. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
39. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
41. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
42. 8T-4971 M [1] BOLT (M6X1X30-MM)  
43. 9X-8250 [1] CLIP  
44. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76110095
 

458-0701: WIRING GP-ENGINE

458-0701 WIRING GP-ENGINE -CANOPY
PART OF 460-7540, 460-7541 CANOPY AR
AN ATTACHMENT
i06137134 SEBP7611
4580701 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 [10] STRAP-CABLE  
3. 7K-1181 [16] STRAP-CABLE  
4. 266-7379 [1] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
7. 465-6073 [1] BRACKET  
8. 465-6074 [1] BRACKET  
9. 471-5192 Y [1] HARNESS AS-ENGINE  
10. 471-5195 [1] BRACKET AS  
11. 477-1182 [1] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
12. 096-2626 [1] CLIP  
13. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
14. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
15. 132-5789 [4] CLIP (LADDER)  
16. 132-7551 [1] SPACER (11X19X6-MM THK)  
17. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
18. 156-6175 [7] CLIP (LADDER)  
19. 204-1611 [1] STRAP (DUAL)  
20. 310-1898 [1] CLIP (LADDER)  
21. 352-3964 [1] CLIP (LADDER)  
22. 4P-7581 [1] CLIP (LADDER)  
23. 4P-8134 [1] CLIP (LADDER)  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 5C-8312 M [4] NUT (M4X0.7-THD)  
26. 5C-9553 M [5] BOLT (M6X1X16-MM)  
27. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
28. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
29. 7C-4354 [1] CLIP  
30. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
32. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
33. 8T-4138 M [2] BOLT (M6X1X20-MM)  
34. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
35. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
36. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
37. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
38. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
40. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
41. 8T-4971 M [1] BOLT (M6X1X30-MM)  
42. 9X-8250 [1] CLIP  
43. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76110096
 

392-2840: WIRING GP-FRONT

392-2840 WIRING GP-FRONT -SHOVEL
PART OF 468-4614 BOOM AR
i05236230 SEBP7611
3922840 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 7K-1181 [4] STRAP-CABLE  
3. 204-1611 [4] STRAP (DUAL)  
4. 266-7379 [2] STRAP-CABLE  
5. 392-2828 Y [1] HARNESS AS-SENSOR  
6. 430-6413 CY [1] HARNESS AS-FRONT  
7. 1S-0994 [2] CLIP (LOOP)  
8. 9M-8406 [2] CLIP (LOOP)  
9. 352-3964 [1] CLIP (LADDER)  
10. 4K-8302 [2] CLIP (LOOP)  
11. 4P-7581 [2] CLIP (LADDER)  
12. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
15. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
16. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
17. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76110097
 

418-9313: WIRING GP-FRONT

418-9313 WIRING GP-FRONT
PART OF 468-4614 BOOM AR
i05011569 SEBP7611
4189313 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 204-1611 [7] STRAP (DUAL)  
3. 418-9314 Y [1] HARNESS AS-LIGHTING  
4. 284-3366 [1] PLATE AS  
5. 284-3367 [1] PLATE AS  
6. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
7. 5P-9297 [1] CLIP (LOOP)  
8. 6V-3265 [1] CLIP  
9. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
10. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76110098
 

458-0720: WIRING GP-MACHINE

458-0720 WIRING GP-MACHINE
PART OF 458-0717 CONTROL AR-MACHINE
Type 1
AN ATTACHMENT
i06144960 SEBP7611
4580720 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 7K-1181 [11] STRAP-CABLE  
3. 155-0576 [6] MOUNT-ISOLATION  
4. 163-6795 [1] STRAP-CABLE  
5. 165-5655 [1] LAMP AS (24-VOLT)(SECURITY SYSTEM)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 206-5208 [1] COIL AS (EXCITER)  
  205-8257 [1] COIL AS (EXCITER)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  207-5271 [1] WASHER (27X60.5X0.36-MM THK)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 207-5262 Y [1] ELECTRONICS GP-MACHINE (SECURITY)  
8. 219-6607 [2] FILM-INFORMATION (SECURITY SYSTEM)  
9. 222-3870 [1] COIL AS (FERRITE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
10. 239-1182 [2] RELAY AS (12-VOLT)  
11. 392-2860 [1] BRACKET AS  
12. 392-2865 [1] PLATE  
13. 471-5193 Y [1] HARNESS AS-WIRING  
14. 200-6260 M [3] SCREW-BUTTON HEAD (M8X1.25X50-MM)  
15. 243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
16. 4H-1225 [2] WASHER (11X22X6-MM THK)  
17. 5C-7261 M [3] NUT (M8X1.25-THD)  
18. 5C-9553 M [2] BOLT (M6X1X16-MM)  
19. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
22. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
23. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
24. 9N-0869 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
25. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
26. 5P-5639 D SEAL (0.2-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76110099
 

458-0720: WIRING GP-MACHINE

458-0720 WIRING GP-MACHINE
PART OF 458-0717 CONTROL AR-MACHINE
Type 2
AN ATTACHMENT
i07167297 SEBP7611
4580720 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 305E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 7K-1181 C [12] STRAP-CABLE  
3. 8T-9655 C [8] MOUNT-ISOLATION  
4. 163-6795 [1] STRAP-CABLE  
5. 165-5655 [1] LAMP AS (24-VOLT)(LED)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 206-5208 [1] COIL AS (EXCITER)  
  205-8257 [1] COIL AS (EXCITER)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  207-5271 [1] WASHER (27X60.5X0.36-MM THK)  
  5P-5677 BD [1] WIRE (18-GA, BLACK)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 219-6607 [2] FILM-INFORMATION (SECURITY SYSTEM)  
8. 222-3870 [1] COIL AS (FERRITE)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E [1] SLEEVE (15-CM)  
  5P-5677 BD [1] WIRE (18-GA, BLACK)  
9. 239-1182 [1] RELAY AS (12-VOLT)(ENGINE START)  
9A. 239-1182 [1] RELAY AS (12-VOLT)(KEY SWITCH)  
10. 243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
11. 392-2865 [1] PLATE  
12. 467-9245 C [1] ELECTRONICS GP-MACHINE (SECURITY)  
  285-3231 [2] KEY AS-ELECTRONIC (SECURITY)  
  459-8447 [1] SOFTWARE GP-MACHINE  
13. 479-4343 CY [1] HARNESS AS-WIRING (MACHINE SECURITY SYSTEM)  
14. 479-4346 C [1] PLATE AS  
15. 495-8604 C [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
16. 5P-5639 D SEAL (0.2-M)  
17. 200-6260 CM [4] SCREW-BUTTON HEAD (M8X1.25X50-MM)  
18. 4H-1225 [2] WASHER (11X22X6-MM THK)  
19. 5C-7261 CM [4] NUT (M8X1.25-THD)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 6I-1418 C [4] SPACER (8.2X12.7X28.7-MM THK)  
22. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
24. 8T-4138 CM [4] BOLT (M6X1X20-MM)  
25. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
26. 8T-4205 C [4] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 8T-4224 C [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 9N-0869 C [4] WASHER-HARD (8.8X25.5X2-MM THK)  
29. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Testing and Adjusting
Electric Starting System - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 305E2 CR :

SENSOR GP-MACHINE LEVEL
438-4836 SENSOR GP-MACHINE LEVEL
SENSOR & MOUNTING GP
284-3361 SENSOR & MOUNTING GP
SENSOR & MOUNTING GP
284-3360 SENSOR & MOUNTING GP
RELAY GP
398-6363 RELAY GP
RELAY GP
327-6207 RELAY GP
MOUNTING GP-WIRING
486-5184 MOUNTING GP-WIRING
LIGHTING GP-WARNING
437-4855 LIGHTING GP-WARNING
LIGHTING GP-WARNING
392-2873 LIGHTING GP-WARNING
SWITCH GP-ROTARY
319-4420 SWITCH GP-ROTARY
WIRING GP-CONSOLE
458-0690 WIRING GP-CONSOLE
WIRING GP-CONSOLE
458-0695 WIRING GP-CONSOLE
WIRING GP-ENGINE
458-0698 WIRING GP-ENGINE
WIRING GP-ENGINE
458-0701 WIRING GP-ENGINE
WIRING GP-FRONT
392-2840 WIRING GP-FRONT
WIRING GP-FRONT
418-9313 WIRING GP-FRONT
WIRING GP-MACHINE
458-0720 WIRING GP-MACHINE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.