AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

458-0720 WIRING GP-MACHINE PART OF 458-0717 CONTROL AR-MACHINE Type 1 AN ATTACHMENT 305.5E2 CR MINI HYD EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR
SPROCKET GP
FRAME AND BODY
COUNTERWEIGHT GP

MINI HYD EXCAVATOR 305.5E2 CR MINI HYD EXCAVATOR FR5
 305.5E2 CR Mini Hydraulic Excavator FR500001-UP (MACHINE) POWERED BY C2.4 Engine SEBP7620 305.5E2 CR FR5   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FRONT
392-2840 WIRING GP-FRONT
WIRING GP-FRONT
418-9315 WIRING GP-FRONT
WIRING GP-MACHINE
458-0720 WIRING GP-MACHINE
WIRING GP-MACHINE
458-0720 WIRING GP-MACHINE
467-8381 WIRING GP-MACHINE
 

#SEBP76200100
 

458-0720: WIRING GP-MACHINE

458-0720 WIRING GP-MACHINE
PART OF 458-0717 CONTROL AR-MACHINE
Type 1
AN ATTACHMENT
i06144960 SEBP7620
4580720 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 7K-1181 [11] STRAP-CABLE  
3. 155-0576 [6] MOUNT-ISOLATION  
4. 163-6795 [1] STRAP-CABLE  
5. 165-5655 [1] LAMP AS (24-VOLT)(SECURITY SYSTEM)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 206-5208 [1] COIL AS (EXCITER)  
  205-8257 [1] COIL AS (EXCITER)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  207-5271 [1] WASHER (27X60.5X0.36-MM THK)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 207-5262 Y [1] ELECTRONICS GP-MACHINE (SECURITY)  
8. 219-6607 [2] FILM-INFORMATION (SECURITY SYSTEM)  
9. 222-3870 [1] COIL AS (FERRITE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
10. 239-1182 [2] RELAY AS (12-VOLT)  
11. 392-2860 [1] BRACKET AS  
12. 392-2865 [1] PLATE  
13. 471-5193 Y [1] HARNESS AS-WIRING  
14. 200-6260 M [3] SCREW-BUTTON HEAD (M8X1.25X50-MM)  
15. 243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
16. 4H-1225 [2] WASHER (11X22X6-MM THK)  
17. 5C-7261 M [3] NUT (M8X1.25-THD)  
18. 5C-9553 M [2] BOLT (M6X1X16-MM)  
19. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
22. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
23. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
24. 9N-0869 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
25. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
26. 5P-5639 D SEAL (0.2-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76200101
 

458-0720: WIRING GP-MACHINE

458-0720 WIRING GP-MACHINE
PART OF 458-0717 CONTROL AR-MACHINE
Type 2
AN ATTACHMENT
i07167297 SEBP7620
4580720 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 7K-1181 C [12] STRAP-CABLE  
3. 8T-9655 C [8] MOUNT-ISOLATION  
4. 163-6795 [1] STRAP-CABLE  
5. 165-5655 [1] LAMP AS (24-VOLT)(LED)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 206-5208 [1] COIL AS (EXCITER)  
  205-8257 [1] COIL AS (EXCITER)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  207-5271 [1] WASHER (27X60.5X0.36-MM THK)  
  5P-5677 BD [1] WIRE (18-GA, BLACK)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 219-6607 [2] FILM-INFORMATION (SECURITY SYSTEM)  
8. 222-3870 [1] COIL AS (FERRITE)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E [1] SLEEVE (15-CM)  
  5P-5677 BD [1] WIRE (18-GA, BLACK)  
9. 239-1182 [1] RELAY AS (12-VOLT)(ENGINE START)  
9A. 239-1182 [1] RELAY AS (12-VOLT)(KEY SWITCH)  
10. 243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
11. 392-2865 [1] PLATE  
12. 467-9245 C [1] ELECTRONICS GP-MACHINE (SECURITY)  
  285-3231 [2] KEY AS-ELECTRONIC (SECURITY)  
  459-8447 [1] SOFTWARE GP-MACHINE  
13. 479-4343 CY [1] HARNESS AS-WIRING (MACHINE SECURITY SYSTEM)  
14. 479-4346 C [1] PLATE AS  
15. 495-8604 C [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
16. 5P-5639 D SEAL (0.2-M)  
17. 200-6260 CM [4] SCREW-BUTTON HEAD (M8X1.25X50-MM)  
18. 4H-1225 [2] WASHER (11X22X6-MM THK)  
19. 5C-7261 CM [4] NUT (M8X1.25-THD)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 6I-1418 C [4] SPACER (8.2X12.7X28.7-MM THK)  
22. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
24. 8T-4138 CM [4] BOLT (M6X1X20-MM)  
25. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
26. 8T-4205 C [4] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 8T-4224 C [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 9N-0869 C [4] WASHER-HARD (8.8X25.5X2-MM THK)  
29. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76200102
 

467-8381: WIRING GP-MACHINE

467-8381 WIRING GP-MACHINE
AN ATTACHMENT
i07291194 SEBP7620
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  207-5262 Y [1] ELECTRONICS GP-MACHINE (SECURITY)  
    -OR-
  467-9245 Y [1] ELECTRONICS GP-MACHINE (SECURITY)(SECURITY)  
  471-5193 Y [1] HARNESS AS-WIRING  
    -OR-
  479-4343 Y [1] HARNESS AS-WIRING  
  5C-9553 M [2] BOLT (M6X1X16-MM)  
  8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  8T-4186 M [2] BOLT (M10X1.5X40-MM)  
  392-2860 [1] BRACKET AS  
    -OR-
  495-8604 [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
  206-5208 [1] COIL AS (EXCITER)  
  205-8257 [1] COIL AS (EXCITER)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  207-5271 [1] WASHER (27X60.5X0.36-MM THK)  
  5P-5677 BD WIRE (18-GA, BLACK)(0.4-M)  
  222-3870 [1] COIL AS (FERRITE)  
  5P-5677 BD WIRE (18-GA, BLACK)(0.8-M)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  438-4897 [1] COVER-UPPER  
  224-3385 [1] FILM-IDENTIFICATION (ENGINE START)  
  235-7959 [2] FILM-IDENTIFICATION (MACHINE SECURITY SYSTEM)  
  219-6607 [2] FILM-INFORMATION (SECURITY SYSTEM)  
  205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
  165-5655 [1] LAMP AS (24-VOLT)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-0576 [6] MOUNT-ISOLATION  
    -OR-
  8T-9655 [8] MOUNT-ISOLATION  
  5C-7261 M [4] NUT (M8X1.25-THD)  
  392-2865 [1] PLATE  
  243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  239-1182 [2] RELAY AS (12-VOLT)(ENGINE START)  
  200-6260 M [4] SCREW-BUTTON HEAD (M8X1.25X50-MM)  
  5P-5639 D SEAL (0.2-M)  
  6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
  3S-2093 [5] STRAP-CABLE  
  7K-1181 [12] STRAP-CABLE  
  163-6795 [1] STRAP-CABLE  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  4H-1225 [2] WASHER (11X22X6-MM THK)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
  479-4346 [1] PLATE AS  
  8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
  8T-4138 M [4] BOLT (M6X1X20-MM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP76200103
 

417-1115: DRIVE GP-FINAL

417-1115 DRIVE GP-FINAL
PART OF 397-6945 MOTOR & MTG GP-TRAVEL
i06140287 SEBP7620
4171115 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 441-7737 [1] COVER  
2. 441-7739 [1] GEAR (15-TEETH)  
3. 441-7740 [1] GEAR (8-TEETH)  
4. 441-7742 [1] WASHER (33.3X49.5X2.5-MM THK)  
5. 441-7743 [1] RING  
6. 441-7746 [2] SET-SEAL  
7. 227-3619 [1] RING  
8. 441-7748 [1] RING  
9. 3J-0634 J [1] SEAL-O-RING  
10. 095-1582 J [2] SEAL-O-RING  
11. 095-1575 J [1] SEAL-O-RING  
12. 227-5990 [2] PLUG  
13. 150-6379 [1] PLUG  
14. 452-3610 Y [1] MOTOR GP-PISTON (FINAL DRIVE)  
15. 9S-8004 [2] PLUG (9/16-18-THD)  
16. 438-8393 [1] KIT-BEARING (FINAL DRIVE)  
17. 438-8394 [1] KIT-CARRIER  
19. 467-3069 [1] KIT-GEAR  
    (INCLUDES WASHERS, GEARS, RINGS, THRUST PLATES & NEEDLE)
20. 6V-5200 [4] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  438-8395 J [1] KIT-SEAL (FINAL DRIVE)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP76200104
 

397-7059: POWER TRAIN AR

397-7059 POWER TRAIN AR
PART OF 460-7552 COMMON AR
i06140281 SEBP7620
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  397-6942 Y [1] MOTOR & MTG GP-SWING  
  397-6945 Y [1] MOTOR & MTG GP-TRAVEL  
  260-6340 Y [2] SPROCKET GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP76200105
 

260-6340: SPROCKET GP

260-6340 SPROCKET GP
PART OF 397-7059 POWER TRAIN AR
i04635909 SEBP7620
2606340 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 085-9768 M [12] BOLT (M14X2X40-MM)  
2. 260-6341 [1] SPROCKET  
3. 7X-0510 [12] WASHER-HARD (15.5X29X3-MM THK)  
  M   METRIC PART
 

#SEBP76200106
 

367-0945: COUNTERWEIGHT & MOUNTING GP

367-0945 COUNTERWEIGHT & MOUNTING GP -EXTRA
PART OF 468-8366 COUNTERWEIGHT AR
AN ATTACHMENT
i04631259 SEBP7620
3670945 COUNTERWEIGHT & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-2111 [2] CAP  
2. 265-8354 [1] COUNTERWEIGHT AS (EXTRA)  
3. 6C-9149 [2] WASHER (22X50X10-MM THK)  
4. 7X-2566 M [2] BOLT (M20X2.5X110-MM)  
  M   METRIC PART
 

#SEBP76200107
 

468-8365: COUNTERWEIGHT AR

468-8365 COUNTERWEIGHT AR -STANDARD
PART OF 478-1961 STICK AR-HOE
AN ATTACHMENT
i06131637 SEBP7620
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  367-0949 Y [1] COVER GP-COUNTERWEIGHT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP76200108
 

468-8366: COUNTERWEIGHT AR

468-8366 COUNTERWEIGHT AR -EXTRA
PART OF 478-1962 STICK AR-HOE
AN ATTACHMENT
i06131653 SEBP7620
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  367-0945 Y [1] COUNTERWEIGHT & MOUNTING GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP76200109
 

461-0432: COUNTERWEIGHT GP

461-0432 COUNTERWEIGHT GP
550-KG (1212.5-LB)
PART OF 460-7553 CHASSIS AR
i06140377 SEBP7620
4610432 COUNTERWEIGHT GP Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-2111 [3] CAP  
2. [1] COUNTERWEIGHT AS  
  367-1099 [1] FOAM  
  367-1100 [1] FOAM  
  [1] COUNTERWEIGHT AS  
3. 086-0299 [2] WASHER (22X60X9-MM THK)  
4. 7X-2532 M [1] BOLT (M20X2.5X130-MM)  
5. 7X-2563 M [2] BOLT (M20X2.5X60-MM)  
6. 8T-4170 M [1] BOLT (M20X2.5X150-MM)  
7. 8T-5439 [2] WASHER-HARD (21.5X45X6-MM THK)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Battery - Recycle
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators
Battery or Battery Cable - Inspect/Replace
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators
Fuses - Replace
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for Key Box Kit on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Installation Procedure for Key Box Kit on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Technical Information Bulletin
Service Hour Meter Malfunctions on Mini Hydraulic Excavators Equipped with a Canopy {1408, 7301}
Service Hour Meter Malfunctions on Mini Hydraulic Excavators Equipped with a Canopy {1408, 7301}
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
System Schematic
MSS3s Machine Security System
Electric Starting System - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Troubleshooting
Electrical Connector - Inspect
304E2, 305E2 and 305.5E2 Mini Hydraulic Excavator
Connector Locations
304E2, 305E2 and 305.5E2 Mini Hydraulic Excavator
Wiring Harness (Open Circuit) - Test
304E2, 305E2 and 305.5E2 Mini Hydraulic Excavator
Wiring Harness (Short Circuit) - Test
304E2, 305E2 and 305.5E2 Mini Hydraulic Excavator
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
System Schematic
304E2, 305E2 and 305.5E2 Mini Hydraulic Excavator
Potentiometer - Test
304E2, 305E2 and 305.5E2 Mini Hydraulic Excavator
Connector Contact Description
304E2, 305E2 and 305.5E2 Mini Hydraulic Excavator
Electrical Connectors
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Relay - Test - ECM Main Relay
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
An Improved Service Meter Kit Is Now Used on Certain Mini Hydraulic Excavators {1408, 7301}
An Improved Service Meter Kit Is Now Used on Certain Mini Hydraulic Excavators {1408, 7301}
Installation Procedure for the Key Box Kit Is Now Available on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Installation Procedure for the Key Box Kit Is Now Available on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
A New Service Meter Kit Is Now Used On Certain Mini Hydraulic Excavators {1408, 7301}
A New Service Meter Kit Is Now Used On Certain Mini Hydraulic Excavators {1408, 7301}

Caterpillar Parts SIS Catalog 305.5E2 CR :

WIRING GP-FRONT
418-9315 WIRING GP-FRONT
WIRING GP-FRONT
392-2840 WIRING GP-FRONT
WIRING GP-ENGINE
458-0701 WIRING GP-ENGINE
WIRING GP-ENGINE
458-0698 WIRING GP-ENGINE
WIRING GP-CONSOLE
458-0695 WIRING GP-CONSOLE
WIRING GP-CONSOLE
458-0690 WIRING GP-CONSOLE
SWITCH GP-ROTARY
319-4420 SWITCH GP-ROTARY
STARTING MOTOR GP-ELECTRIC
383-0154 STARTING MOTOR GP-ELECTRIC
WIRING GP-MACHINE
458-0720 WIRING GP-MACHINE
467-8381 WIRING GP-MACHINE
DRIVE GP-FINAL
417-1115 DRIVE GP-FINAL
397-7059 POWER TRAIN AR
SPROCKET GP
260-6340 SPROCKET GP
COUNTERWEIGHT & MOUNTING GP
367-0945 COUNTERWEIGHT & MOUNTING GP
468-8365 COUNTERWEIGHT AR
468-8366 COUNTERWEIGHT AR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.