AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

303.5E2 Mini Hydraulic Excavator JWY00001-UP (MACHINE) POWERED BY C1.7 Engine BASIC ENGINE Caterpillar SIS



MINI HYD EXCAVATOR 303.5E2 MINI HYD EXCAVATOR JWY
 303.5E2 Mini Hydraulic Excavator JWY00001-UP (MACHINE) POWERED BY C1.7 Engine SEBP7633 303.5E2 JWY   (2015)

Parts group 303.5E2:

  For full view, you need register
BASIC ENGINE
BELT TIGHTENER GP
BELT TENSIONER GP
380-6597 BELT TENSIONER GP
380-6597 BELT TENSIONER GP
PART OF 452-5629 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
464-6971 CAMSHAFT GP
464-6971 CAMSHAFT GP
PART OF 450-3215 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CAMSHAFT GP
464-7004 CAMSHAFT GP
464-7004 CAMSHAFT GP
PART OF 464-7003 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
CAMSHAFT GP
557-9609 CAMSHAFT GP
557-9609 CAMSHAFT GP
S/N JWY3424-UP
PART OF 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
464-6996 CRANKSHAFT GP
464-6996 CRANKSHAFT GP
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
CYLINDER BLOCK AS
464-6350 CYLINDER BLOCK AS
464-6350 CYLINDER BLOCK AS
PART OF 464-6970 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
464-6970 CYLINDER BLOCK GP
464-6970 CYLINDER BLOCK GP
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD AS
464-6965 CYLINDER HEAD AS
464-6965 CYLINDER HEAD AS
PART OF 464-6964 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
464-6964 CYLINDER HEAD GP
464-6964 CYLINDER HEAD GP
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
464-7002 FLYWHEEL GP
464-7002 FLYWHEEL GP
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
GEAR GP
HOUSING GP-FRONT
464-6967 HOUSING GP-FRONT
464-6967 HOUSING GP-FRONT
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
HOUSING GP-FRONT
HOUSING GP-FRONT
464-6967 HOUSING GP-FRONT
464-6967 HOUSING GP-FRONT
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PUMP GP-ENGINE OIL
383-0161 PUMP GP-ENGINE OIL
383-0161 PUMP GP-ENGINE OIL
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
386-4638 LIFTING GP-ENGINE
386-4638 LIFTING GP-ENGINE
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
415-2701 MOUNTING GP-ENGINE
415-2701 MOUNTING GP-ENGINE
PART OF 456-2634 CAB AR, 456-2627 CANOPY AR
AN ATTACHMENT
MOUNTING GP-ENGINE
415-2702 MOUNTING GP-ENGINE
415-2702 MOUNTING GP-ENGINE
PART OF 456-2641 CAB AR
AN ATTACHMENT
PAN GP-OIL
DRAIN GP-ENGINE OIL
378-2141 DRAIN GP-ENGINE OIL
378-2141 DRAIN GP-ENGINE OIL -ECOLOGY
PART OF 379-4727 DRAIN GP-OIL
AN ATTACHMENT
PAN GP-OIL
386-4645 PAN GP-OIL
386-4645 PAN GP-OIL -ENGINE
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
464-6977 PISTON & ROD GP
464-6977 PISTON & ROD GP
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PULLEY GP
PULLEY GP-FAN DRIVE
464-7061 PULLEY GP-FAN DRIVE
464-7061 PULLEY GP-FAN DRIVE
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
386-4566 COVER GP-VALVE MECHANISM
386-4566 COVER GP-VALVE MECHANISM
PART OF 450-3215 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
543-9480 COVER GP-VALVE MECHANISM
543-9480 COVER GP-VALVE MECHANISM
S/N JWY3424-UP
PART OF 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
VALVE MECHANISM GP
464-6974 VALVE MECHANISM GP
464-6974 VALVE MECHANISM GP
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT

Information:

(For parts list, see above)

Disassembly and Assembly
Cylinder Head - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Cylinder Head - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Specifications
Camshaft
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Camshaft - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Specifications
Refrigerant Compressor
303.5E2 CR, 304.5E2 XTC, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Machine System Specifications
Crankshaft
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Main Bearings - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Main Bearings - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Bearing Clearance - Check
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Main Bearings - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Cylinder Block - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Troubleshooting
Cylinder Is Noisy
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Main Bearings - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Bearing Clearance - Check
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Valve Lash - Check
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Cylinder Head Valves
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Nozzles
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Nozzle - Test
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Disassembly and Assembly
Inlet and Exhaust Valve Guides - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Cylinder Head - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Cylinder Head - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Operation and Maintenance Manual
Belts - Inspect/Adjust
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Flywheel - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Service Magazine
New Dowel Pins in the Flywheel Housing Assembly Are Now Used on Certain Mini Hydraulic Excavators {1157, 5070}
New Dowel Pins in the Flywheel Housing Assembly Are Now Used on Certain Mini Hydraulic Excavators {1157, 5070}
Specifications
Gear Group (Front)
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Idler Gear - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Housing (Front) - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Housing (Front) - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belts - Inspect/Adjust
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Specifications
Engine Mounting
303.5E2 CR, 304.5E2 XTC, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Machine System Specifications
Service Magazine
New Compressor Support and Bracket Assembly Are Now Used on Certain Mini Hydraulic Excavators {1152, 1153, 1154}
New Compressor Support and Bracket Assembly Are Now Used on Certain Mini Hydraulic Excavators {1152, 1153, 1154}
Operation and Maintenance Manual
Engine Oil Level - Check
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Engine Oil and Filter - Change
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pump - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Engine Oil Pump - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Engine Oil Pan - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Oil Pan - Remove and Install
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement
Specifications
Piston and Rings
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Connecting Rod
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Connecting Rod Bearings - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Engine Crankcase Pressure (Blowby) - Test
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Compression - Test
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Disassembly and Assembly
Connecting Rod Bearings - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Bearing Clearance - Check
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Specifications
Crankshaft Pulley
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Crankshaft Pulley - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belts - Replace
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Engine Valve Lash - Check
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Specifications
Valve Mechanism Cover
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Valve Mechanism
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Lifter Group
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Finding Top Center Position for No. 1 Piston
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Troubleshooting
Valve Lash Is Excessive
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Disassembly and Assembly
Lifter Group - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft and Push Rod - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft and Push Rod - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.