BASIC ENGINE
VALVE MECHANISM GPCRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP
PAN GP-OIL
FLYWHEEL GP
COOLING SYSTEM
FAN GPBASIC ENGINE
VALVE MECHANISM GP#SEBP76330040
386-4566: COVER GP-VALVE MECHANISM
  386-4566 COVER GP-VALVE MECHANISM 
PART OF 450-3215 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PART OF 450-3215 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your 303.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 383-0217 | [1] | SEAL-O-RING | |
| 2. | 383-0321 | [1] | PLUG-FILLER (ENGINE OIL) | |
| 3. | 386-6930 | [1] | COVER AS-VALVE | |
| 383-0203 | [4] | SCREW | ||
| 383-0382 | [1] | PIPE | ||
| 383-0524 | [1] | COVER | ||
| 383-0563 | [1] | VALVE-BREATHER | ||
| 4. | 386-6933 | [1] | GASKET | |
| 5. | 383-0574 | [8] | BOLT | |
| 6. | 395-0080 | [1] | HOSE-BREATHER | |
| 7. | 389-1593 | [2] | CLAMP | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP76330041
543-9480: COVER GP-VALVE MECHANISM
  543-9480 COVER GP-VALVE MECHANISM 
S/N JWY3424-UP
PART OF 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N JWY3424-UP
PART OF 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your 303.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 383-0566 | [1] | HOSE-BREATHER | |
| 2. | 436-0812 | [2] | CLAMP-HOSE | |
| 3. | 386-6930 | [1] | COVER AS-VALVE | |
| 3A. | 383-0203 | [4] | SCREW | |
| 3B. | 383-0382 | [1] | PIPE | |
| 3C. | 383-0524 | [1] | COVER | |
| 3D. | 383-0563 | [1] | VALVE-BREATHER | |
| 4. | 386-6933 | [1] | GASKET | |
| 5. | 383-0574 | [8] | BOLT | |
| 6. | 436-0817 | [1] | PLUG AS (ENGINE OIL FILLER) | |
| 6A. | 383-0217 | [1] | SEAL-O-RING | 
#SEBP76330042
464-6996: CRANKSHAFT GP
  464-6996 CRANKSHAFT GP 
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your 303.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 383-0515 | [1] | GEAR AS-IDLER (79-TEETH) | |
| 1A. | 438-6413 | [1] | BEARING | |
| 2. | 383-0587 | [1] | COLLAR-GEAR CONTROL | |
| 3. | 393-7502 | [2] | BOLT-FLANGE HEAD | |
| 4. | 383-0400 | [1] | SHAFT-GEAR | |
| 5. | 393-7573 | [3] | BOLT-FLANGE HEAD | |
| 6. | 464-6997 | [1] | CRANKSHAFT AS | |
| 6A. | 383-0231 | [3] | BALL | |
| 6B. | 383-0393 | [1] | BEARING-CRANKSHAFT | |
| 7. | 383-0398 | [1] | PIN-STRAIGHT | |
| 8. | 464-6998 | [1] | GEAR | |
| 9. | 464-6999 | [1] | KEY | |
| 10. | 383-0292 | [1] | SLINGER-OIL | |
| 11. | 383-0392 | [1] | COLLAR-CAMSHAFT | |
| 12. | 383-0210 | [1] | SEAL-O-RING | |
| 13. | 383-0271 | [1] | NUT | |
| 14. | 383-0467 | [1] | BEARING-CRANKSHAFT | |
| 15. | 383-0553 | [1] | SEAL | |
| 16. | 383-0469 | [2] | BUSHING | |
| 17. | 383-0470 | [2] | BUSHING | 
#SEBP76330043
464-6350: CYLINDER BLOCK AS
Parts for your 303.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 383-0303 | [5] | PLUG | |
| 2. | 383-0304 | [2] | PLUG | |
| 3. | 383-0229 | [1] | PLUG | |
| 4. | 383-0385 | [3] | PLUG | |
| 5. | 383-0337 | [1] | PLUG | |
| 6. | 383-0260 | [5] | CAP | |
| 7. | 383-0261 | [2] | CAP | |
| 8. | 383-0218 | [2] | PIN | |
| 9. | 383-0219 | [3] | PIN | |
| 10. | 383-0220 | [2] | PIN | |
| 11. | 383-0221 | [1] | PIN | |
| 12. | 383-0272 | [1] | PIN | |
| 13. | 383-0358 | [1] | CAP | 
#SEBP76330044
464-6970: CYLINDER BLOCK GP
  464-6970 CYLINDER BLOCK GP 
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your 303.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 464-6350 Y | [1] | CYLINDER BLOCK AS | |
| 2. | 383-0557 | [1] | PLUG | |
| 3. | 383-0256 | [1] | GASKET | |
| 4. | 383-0386 | [1] | FITTING | |
| 5. | 383-0432 | [1] | CASE AS | |
| (EACH INCLUDES) | ||||
| 5A. | 383-0468 | [2] | BEARING (STANDARD MAIN BEARINGS) | |
| AB | BEARING (0.20-MM US) | |||
| AB | BEARING (0.40-MM US) | |||
| 5B. | 383-0447 | [2] | BOLT | |
| 6. | 383-0446 | [1] | GASKET | |
| 7. | 383-0532 | [1] | COVER | |
| 8. | 383-0451 | [1] | GASKET | |
| 9. | 383-0174 | [8] | BOLT | |
| 10. | 383-0175 | [8] | BOLT | |
| 11. | 383-0347 | [1] | SEAL (REAR) | |
| 12. | 383-0457 | [1] | CASE AS | |
| (EACH INCLUDES) | ||||
| 12A. | 383-0468 | [2] | BEARING (STANDARD MAIN BEARINGS) | |
| AB | BEARING (0.20-MM US) | |||
| AB | BEARING (0.40-MM US) | |||
| 12B. | 383-0447 | [2] | BOLT | |
| 13. | 383-0458 | [1] | CASE AS | |
| (EACH INCLUDES) | ||||
| 13A. | 383-0468 | [2] | BEARING (STANDARD MAIN BEARINGS) | |
| AB | BEARING (0.20-MM US) | |||
| AB | BEARING (0.40-MM US) | |||
| 13B. | 383-0447 | [2] | BOLT | |
| 14. | 383-0305 | [2] | BOLT | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP76330045
464-6965: CYLINDER HEAD AS
#SEBP76330046
464-6964: CYLINDER HEAD GP
  464-6964 CYLINDER HEAD GP 
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PART OF 450-3215, 543-1254 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your 303.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 464-6965 Y | [1] | CYLINDER HEAD AS | |
| 2. | 383-0387 | [14] | BOLT | |
| 3. | 386-6921 B | [1] | GASKET (1.20-MM THK) | |
| 386-6922 | [1] | GASKET (1.15-MM THK) | ||
| 386-6923 | [1] | GASKET (1.25-MM THK) | ||
| 386-6924 | [1] | GASKET (1.30-MM THK) | ||
| 386-6925 | [1] | GASKET (1.35-MM THK) | ||
| 4. | 395-3381 | [1] | PLUG | |
| 5. | 383-0534 | [3] | VALVE-INLET | |
| 6. | 383-0535 | [3] | VALVE-EXHAUST | |
| 7. | 383-0554 | [6] | SPRING-VALVE | |
| 8. | 383-0265 | [6] | RETAINER | |
| 9. | 383-0266 | [6] | COLLAR | |
| 10. | 383-0263 | [6] | SEAL | |
| 11. | 383-0264 | [6] | CAP | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP76330047
378-2141: DRAIN GP-ENGINE OIL
  378-2141 DRAIN GP-ENGINE OIL -ECOLOGY 
PART OF 379-4727 DRAIN GP-OIL
AN ATTACHMENT
PART OF 379-4727 DRAIN GP-OIL
AN ATTACHMENT
Parts for your 303.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP76330048
464-7002: FLYWHEEL GP
#SEBP76330049
380-6386: GUARD GP-FAN
Parts for your 303.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SISInformation:
BASIC ENGINE
 
VALVE MECHANISM GP
 
Operation and Maintenance Manual 
       
Specifications 
  
Valve Mechanism Cover
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Valve Mechanism
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Lifter Group
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
     C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines 
  
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
     Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
  
Engine Valve Lash - Inspect/Adjust
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Finding Top Center Position for No. 1 Piston
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
     C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Troubleshooting 
  
Valve Lash Is Excessive
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
     C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Disassembly and Assembly 
  
Lifter Group - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft and Push Rod - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft and Push Rod - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
      C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
  C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines