OPERATOR STATION
AIR CONDITIONER GPHEATER GP
MIRROR GP
CAB GP
OPERATOR GP
PEDAL GP
PLATFORM GP
OPERATOR STATION
AIR CONDITIONER GP
#SEBP76530670
290-6246: LINES GP-AIR CONDITIONER
290-6246 LINES GP-AIR CONDITIONER -UPPER FRAME
S/N EN31-UP
PART OF 488-3453 AIR CONDITIONER AR
S/N EN31-UP
PART OF 488-3453 AIR CONDITIONER AR
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 176-1902 | [1] | DRYER AS-REFRIGERANT (RECEIVER)(AIR CONDITIONER) | |
| 2. | 253-6922 | [1] | HOSE AS | |
| 121-7137 | [1] | SEAL-O-RING | ||
| 3. | 334-6621 | [1] | HOSE AS | |
| 121-7138 | [2] | SEAL-O-RING | ||
| 4. | 264-3542 | [1] | GROMMET | |
| 5. | 290-6248 | [1] | HOSE AS | |
| 283-0267 | [1] | SEAL-O-RING | ||
| 6. | 343-9727 | [1] | HOSE AS | |
| 121-7138 | [1] | SEAL-O-RING | ||
| 283-0266 | [1] | SEAL-O-RING | ||
| 7. | 396-1980 C | [1] | FILM-INSTRUCTION (AIR CONDITIONER, READ OMM) | |
| 8. | 3S-2093 B | [11] | STRAP-CABLE | |
| 9. | 121-7098 | [1] | BRACKET AS | |
| 8T-4138 M | [2] | BOLT (M6X1X20-MM) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| 10. | 6D-1641 | [1] | CLIP (LOOP) | |
| 11. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 12. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 13. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 15. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 16. | 200-6345 | [1] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 17. | 204-2281 | [2] | STRAP-CABLE | |
| 18. | 290-5562 B | [2] | MOUNT (DUAL SWIVEL) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP76530671
250-9631: LINES GP-HEATER
250-9631 LINES GP-HEATER -LINKAGE
S/N EN31-UP
PART OF 395-4147 OPERATOR AR
AN ATTACHMENT
S/N EN31-UP
PART OF 395-4147 OPERATOR AR
AN ATTACHMENT
For full view, you need register
#SEBP76530672
290-6247: LINES GP-HEATER
290-6247 LINES GP-HEATER -UPPER FRAME
S/N EN31-UP
PART OF 488-3453 AIR CONDITIONER AR
S/N EN31-UP
PART OF 488-3453 AIR CONDITIONER AR
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 096-6079 | [2] | TAPE (WHITE) | |
| 2. | 096-6085 | [2] | TAPE (RED) | |
| 3. | 122-9605 | [2] | TUBE | |
| 4. | 235-9014 | [6] | CLAMP-SPRING | |
| 5. | 096-0061 | [1] | STRAP-CABLE | |
| 6. | 3E-4321 | [2] | CLIP (LOOP) | |
| 7. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 9. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 10. | 5P-0767 E | HOSE (380-CM) | ||
| 10A. | 5P-0767 E | HOSE (400-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP76530673
333-0120: MIRROR GP-REAR VIEW
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-5211 | [1] | SPACER (3X15X17-MM THK) | |
| 2. | 170-7721 | [2] | MIRROR AS | |
| 3. | 201-3976 | [1] | ARM-MIRROR | |
| 4. | 201-3977 | [1] | ADAPTER | |
| 5. | 201-3999 | [1] | EXTENSION AS | |
| 6. | 212-6831 | [1] | CLAMP AS | |
| 7. | 212-6833 | [1] | TUBE | |
| 8. | 286-4162 | [1] | PLUG | |
| 9. | 333-0124 | [1] | MIRROR | |
| 10. | 131-3540 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 11. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 12. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 13. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 14. | 7X-0623 | [6] | WASHER (10.5X21X2-MM THK) | |
| 15. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 16. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9R-5615 | [2] | PLUG | |
| M | METRIC PART | |||
#SEBP76530674
333-0122: MIRROR GP-REAR VIEW
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 170-7721 | [2] | MIRROR AS | |
| 2. | 201-3976 | [1] | ARM-MIRROR | |
| 3. | 201-3977 | [1] | ADAPTER | |
| 4. | 260-8398 | [1] | BRACKET | |
| 5. | 333-0113 | [1] | TUBE | |
| 6. | 333-0118 | [1] | TUBE | |
| 7. | 333-0119 | [4] | CLAMP | |
| 8. | 333-0124 | [2] | MIRROR | |
| 9. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 10. | 209-8296 M | [2] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
| 11. | 5C-7261 M | [10] | NUT (M8X1.25-THD) | |
| 12. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 14. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 9R-5615 | [2] | PLUG | |
| M | METRIC PART | |||
#SEBP76530675
344-5421: MOUNTING GP-CAB
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6967 | [2] | LOUVER AS-VENT | |
| 2. | 164-8474 | [2] | LOUVER AS-VENT | |
| 3. | 242-2962 | [1] | COVER GP-CAB | |
| 6C-9237 | [4] | RIVET | ||
| 4. | 3E-8020 M | [5] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 5. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| 6. | 7X-2554 M | [2] | BOLT (M16X2X70-MM) | |
| 7. | 8T-4174 M | [2] | BOLT (M16X2X120-MM) | |
| 8. | 8T-4175 M | [1] | BOLT (M16X2X90-MM) | |
| 9. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 10. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 8T-4910 M | [2] | BOLT (M12X1.75X60-MM) | |
| 12. | 8T-6868 M | [1] | BOLT (M12X1.75X80-MM) | |
| 13. | 9X-8257 | [5] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
#SEBP76530676
395-4147: OPERATOR AR
395-4147 OPERATOR AR
S/N EN31-UP
PART OF 461-6830, 461-6831, 487-7018, 487-7019 RISER AR-CAB
AN ATTACHMENT
S/N EN31-UP
PART OF 461-6830, 461-6831, 487-7018, 487-7019 RISER AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 284-4656 Y | [1] | AIR CONDITIONER & MOUNTING GP | ||
| 350-8546 Y | [1] | CONSOLE GP-OPERATOR | ||
| 322-0099 Y | [1] | CONTROL GP-BRAKE | ||
| 383-4063 Y | [1] | CONTROL GP-JOYSTICK | ||
| 250-9619 Y | [1] | COVER GP-ACCESS (STORAGE) | ||
| 229-9082 Y | [1] | DUCT GP-CAB AIR | ||
| 253-6916 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 250-9631 Y | [1] | LINES GP-HEATER | ||
| 344-5421 Y | [1] | MOUNTING GP-CAB | ||
| 345-7841 Y | [1] | PLATFORM GP | ||
| 250-9606 Y | [1] | STEERING GP-HYDRAULIC | ||
| 250-9607 Y | [1] | SUPPORT GP-SEAT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP76530677
297-6534: PEDAL GP
297-6534 PEDAL GP -ELECTRONIC
S/N EN31-UP
PART OF 252-6685 CONTROL & MTG GP-PEDAL
AN ATTACHMENT
S/N EN31-UP
PART OF 252-6685 CONTROL & MTG GP-PEDAL
AN ATTACHMENT
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-8059 | [1] | CAP-PLASTIC | |
| 2. | 117-8700 | [1] | PEDAL | |
| 3. | 201-0502 | [1] | KIT-PEDAL | |
| (INCLUDES PARTS MARKED N IN GRAPHIC) | ||||
| 4. | 299-5879 | [2] | CAP-PROTECTIVE | |
| 5. | 299-5880 | [1] | PLATE | |
| 6. | 299-5881 | [1] | KIT-PLUNGER | |
| (INCLUDES PARTS MARKED J IN GRAPHIC) | ||||
| 7. | 107-2723 M | [1] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 8. | 151-9272 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS & WEDGE) | ||||
| 10. | 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 11. | 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 12. | 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 13. | 8T-8737 | [2] | PLUG-SEAL | |
| M | METRIC PART | |||
#SEBP76530678
160-1501: PEDAL GP-BRAKE
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-6519 | [1] | BRACKET | |
| 2. | 227-8179 | [1] | PEDAL | |
| 3. | 8U-3213 | [1] | BRACKET | |
| 4. | 180-6520 | [1] | PLATE | |
| 5. | 8U-3214 | [1] | PIN GP-PEDAL | |
| 5C-5306 | [2] | RING-RETAINING | ||
| 6. | 8U-5805 | [1] | PIN GP-PEDAL | |
| 096-2323 | [2] | RING-RETAINING (EXTERNAL) | ||
| 7. | 8U-5806 | [1] | DOWEL | |
| 8. | 180-6523 | [1] | PIN-DOWEL | |
| 9. | 180-6524 | [1] | LEVER | |
| 10. | 8U-5807 | [1] | SPRING | |
| 11. | 6V-2317 M | [2] | BOLT (M8X1.25X30-MM) | |
| 12. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 13. | 5W-1259 | [2] | NUT (M8X1.25-THD) | |
| 14. | 5W-1318 M | [1] | NUT (M8X1.25-THD) | |
| 15. | 8U-3216 | [1] | LOCKWASHER | |
| 16. | 116-9945 | [1] | RETAINER-SPRING | |
| 17. | 095-0916 | [1] | RING-RETAINING | |
| 18. | 5W-9431 | [1] | RING-RETAINING | |
| 19. | 8U-5809 | [1] | RING-WIPER | |
| 20. | 180-6526 | [1] | SPRING | |
| 21. | 116-9946 | [1] | PLATE | |
| M | METRIC PART | |||
#SEBP76530679
345-7841: PLATFORM GP
For full view, you need register
Parts for your M324D2 MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 135-8966 | [1] | GROMMET | |
| 2. | 220-1877 | [1] | PLATE AS | |
| 3. | 240-6946 | [1] | FLOOR MAT | |
| 4. | 290-5551 | [1] | BRACKET | |
| 5. | 304-3000 | [4] | MOUNT AS-PLATFORM | |
| 6. | 343-4311 | [1] | PLATFORM AS | |
| 7. | 123-8642 | [4] | WASHER (17X75X6-MM THK) | |
| 8. | 7X-2556 M | [2] | BOLT (M16X2X100-MM) | |
| 9. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4132 M | [2] | NUT (M16X2-THD) | |
| 11. | 8T-4173 M | [2] | BOLT (M16X2X110-MM) | |
| 12. | 8T-4195 M | [16] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 14. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
