FUEL SYSTEM
PUMP GP-FUEL INJECTIONFILTER GP-FUEL
TANK GP-FUEL
BASIC ENGINE
PULLEY GPELECTRICAL AND STARTING SYSTEM
BATTERY GPFUEL SYSTEM
PUMP GP-FUEL INJECTION
#SEBP76720140
326-9149: PUMP GP-FUEL INJECTION
326-9149 PUMP GP-FUEL INJECTION
S/N C4Z1-UP
PART OF 375-1284, 521-6423 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N C4Z1-UP
PART OF 375-1284, 521-6423 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 2. | 6I-0260 M | [3] | BOLT (M8X1.25X25-MM) | |
| 3. | 178-3336 M | [1] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 4. | 100-4830 M | [1] | BOLT (M10X1.5X20-MM) | |
| 5. | 124-3815 M | [1] | BOLT (M8X1.25X16-MM) | |
| 6. | 140-8714 | [1] | CLIP | |
| 7. | 169-5326 | [1] | SWITCH-TEMPERATURE (FUEL) | |
| 8. | 425-7107 | [1] | GEAR-FUEL PUMP (68-TEETH) | |
| 9. | 230-8995 | [1] | TUBE AS (CYL NO. 1) | |
| 10. | 230-8996 | [1] | TUBE AS (CYL NO. 2) | |
| 11. | 230-8997 | [1] | TUBE AS (CYL NO. 3) | |
| 12. | 230-8998 | [1] | TUBE AS (CYL NO. 4) | |
| 14. | 232-1328 | [1] | CAP | |
| 15. | 232-1793 | [1] | CABLE | |
| 16. | 232-1794 | [3] | HOSE | |
| 17. | 232-2725 | [2] | CLIP | |
| 18. | 232-2726 | [1] | CLIP | |
| 19. | 232-3126 | [1] | CLIP | |
| 20. | 232-3149 | [3] | WASHER (8.35X16.85X1.55-MM THK) | |
| 21. | 232-3157 | [1] | BRACKET | |
| 22. | 232-3274 M | [4] | BOLT (M8X1.25X48.1-MM) | |
| 23. | 238-8671 | [4] | CLAMP-INJECTOR | |
| 24. | 240-5571 | [1] | BRACKET | |
| 25. | 315-3381 | [4] | ATOMIZER AS | |
| (EACH INCLUDES) | ||||
| 25A. | 140-8718 | [1] | WASHER | |
| 25B. | 275-1038 | [1] | SEAL-O-RING | |
| 26. | 326-9147 Y | [1] | PUMP GP-FUEL INJECTION | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP76720141
233-9417: PUMP GP-FUEL PRM & PRIM FILTER
233-9417 PUMP GP-FUEL PRM & PRIM FILTER
S/N CRS1-UP
PART OF 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
PART OF 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-0285 | [1] | BRACKET | |
| 2. | 240-9756 | [1] | KIT-MOUNTING (FUEL PRIMING PUMP) | |
| 2A. | 232-9758 | [3] | WASHER (6.51X17.785X1.6-MM THK) | |
| 120-6872 | [3] | BOLT | ||
| (KIT ALSO INCLUDES SPACERS & MOUNTS) | ||||
| 3. | 311-6822 | [1] | CLIP-TUBE | |
| 4. | 237-0286 | [1] | PLUG | |
| 5. | 215-9508 | [1] | FITTING (QUICK DISCONNECT, FEMALE) | |
| 6. | 215-9509 | [1] | FITTING (QUICK DISCONNECT, MALE) | |
| 7. | 232-3126 | [1] | CLIP | |
| 8. | 232-9759 | [1] | LINE AS-FUEL INJECTION (LOW PRESSURE FEED) | |
| 9. | 237-0284 | [1] | LINE AS-FUEL (LOW PRESSURE RETURN) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 467-7011 Y | [1] | KIT-FUEL PRIMING PUMP | ||
| (INCLUDES SPACERS & ISOLATORS) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP76720142
349-1063: PUMP GP-FUEL PRM & PRIM FILTER
349-1063 PUMP GP-FUEL PRM & PRIM FILTER -WITH WATER SEPARATOR
S/N LBS1-UP
PART OF 481-3120, 481-3130 LINES GP-FUEL
AN ATTACHMENT
S/N LBS1-UP
PART OF 481-3120, 481-3130 LINES GP-FUEL
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS#SEBP76720143
501-4461: PUMP GP-FUEL PRM & PRIM FILTER
501-4461 PUMP GP-FUEL PRM & PRIM FILTER -BRUSHLESS
S/N LBS1-UP
PART OF 481-3120, 481-3130 LINES GP-FUEL
AN ATTACHMENT
S/N LBS1-UP
PART OF 481-3120, 481-3130 LINES GP-FUEL
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 112-9401 | [1] | BOWL AS-WATER COLLECTION | |
| 128-8614 | [1] | KIT-SEAL (WATER SEPARATOR) | ||
| 2. | 118-8118 | [1] | RING-RETAINING | |
| 3. | 149-9954 | [1] | DRAIN AS | |
| 4. | 193-0618 | [1] | SENSOR GP-MOISTURE (WATER SEPARATOR) | |
| 192-7876 | [1] | SCREW-MOUNTING | ||
| 5. | 228-9132 | [1] | FITTING | |
| 6. | 502-3341 | [1] | FILTER-ELEMENT |
#SEBP76720144
430-7961: TANK GP-FUEL
430-7961 TANK GP-FUEL
S/N LBS1-UP
PART OF 485-5499, 485-5502 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N LBS1-UP
PART OF 485-5499, 485-5502 ENGINE AR-COMPLETE
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 349-7901 | [7] | SPACER (9X20X15-MM THK) | |
| 2. | 363-8348 | [2] | MOUNT | |
| 3. | 371-6659 | [1] | SEAL-CENTER | |
| 4. | 398-4230 | [3] | PLATE | |
| 5. | 399-6521 | [2] | STEP | |
| 6. | 433-2344 | [2] | BELT (TANK) | |
| 7. | 436-5164 Y | [1] | TANK GP-FUEL | |
| 8. | 436-5168 | [1] | BOX AS | |
| 159-9540 M | [7] | NUT-WELD (M8X1.25-THD) | ||
| 9. | 461-4636 | [1] | PLATE AS-TREAD | |
| 10. | 461-4637 | [1] | PLATE AS | |
| 11. | 463-5840 | [1] | PLATE AS | |
| 12. | 467-0462 | [1] | CLAMP AS | |
| 13. | 099-3649 M | [7] | BOLT (M8X1.25X40-MM) | |
| 15. | 344-5674 M | [7] | NUT (M8X1.25-THD) | |
| 16. | 5P-4116 | [21] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 8T-4189 M | [8] | BOLT (M8X1.25X20-MM) | |
| 18. | 8T-4193 M | [4] | BOLT (M16X2X50-MM) | |
| 19. | 8T-4908 M | [5] | BOLT (M8X1.25X25-MM) | |
| 20. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 21. | 3E-8299 E | SEAL (60-CM) | ||
| 21A. | 3E-8299 E | SEAL (13-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP76720145
436-5164: TANK GP-FUEL
436-5164 TANK GP-FUEL
S/N LBS1-UP
166-LITER (43.8-US GAL)
PART OF 430-7961 TANK GP-FUEL
AN ATTACHMENT
S/N LBS1-UP
166-LITER (43.8-US GAL)
PART OF 430-7961 TANK GP-FUEL
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 284-9039 | [1] | CAP-FUEL (VENTED) | |
| 2. | 517-3517 | [1] | SENDER AS-FUEL LEVEL (TANK) | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 310-4589 | [1] | GASKET | ||
| 515-9676 | [1] | STRAINER AS (FUEL TANK) | ||
| 3. | 424-6726 | [1] | PLUG AS | |
| 190-7634 | [1] | SEAL-O-RING | ||
| 4. | 483-1406 | [1] | TANK AS-FUEL | |
| 385-5360 | [1] | ADAPTER-FUEL CAP | ||
| 436-5163 | [1] | TANK AS-FUEL | ||
| 5. | 198-9706 M | [6] | SCREW-TRUSS HEAD (M5X0.8X16-MM) | |
| M | METRIC PART | |||
#SEBP76720146
317-9776: ALTERNATOR GP-CHARGING
317-9776 ALTERNATOR GP-CHARGING
S/N C4Z1-UP
PART OF 375-1284, 521-6423 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N C4Z1-UP
PART OF 375-1284, 521-6423 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [1] | BOLT (M8X1.25X25-MM) | |
| 2. | 6I-0650 M | [1] | BOLT (M10X1.5X65-MM) | |
| 3. | 359-9666 M | [1] | BOLT-FLANGE HEAD (M8X1.25X130-MM) | |
| 4. | 113-6349 M | [1] | NUT (M8X1.25-THD) | |
| 5. | 140-8783 M | [2] | BOLT (M10X1.5X45-MM) | |
| 6. | 383-2557 J | [1] | ALTERNATOR (12-VOLT, 120-AMPERE) | |
| 7. | 390-7340 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 8. | 339-5256 J | [1] | BRACKET | |
| J | BRACKET REQUIRED WITH ALTERNATOR TO ENSURE FITMENT | |||
| M | METRIC PART | |||
#SEBP76720147
334-3756: ALTERNATOR GP-CHARGING
334-3756 ALTERNATOR GP-CHARGING
S/N CRS1-UP
12 VOLT 120 AMPERE
PART OF 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
12 VOLT 120 AMPERE
PART OF 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [1] | BOLT (M8X1.25X25-MM) | |
| 2. | 6I-0650 M | [1] | BOLT (M10X1.5X65-MM) | |
| 3. | 359-9666 M | [1] | BOLT-FLANGE HEAD (M8X1.25X130-MM) | |
| 4. | 113-6349 M | [1] | NUT (M8X1.25-THD) | |
| 5. | 140-8783 M | [2] | BOLT (M10X1.5X45-MM) | |
| 6. | 383-2557 J | [1] | ALTERNATOR (12-VOLT, 120-AMPERE) | |
| 7. | 390-7340 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 8. | 339-5256 J | [1] | BRACKET | |
| J | BRACKET REQUIRED WITH ALTERNATOR TO ENSURE FITMENT | |||
| M | METRIC PART | |||
#SEBP76720148
387-6670: BATTERY & WIRING GP
387-6670 BATTERY & WIRING GP -DISCONNECT
S/N LBS1-UP
PART OF 485-5499, 485-5502 ENGINE AR-COMPLETE
Type 1
AN ATTACHMENT
S/N LBS1-UP
PART OF 485-5499, 485-5502 ENGINE AR-COMPLETE
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8320 | [1] | PLATE-INSTRUCTION (BATTERY)(DISCONNECT SWITCH) | |
| 2. | 3S-2093 | [3] | STRAP-CABLE | |
| 3. | 7K-1181 | [4] | STRAP-CABLE | |
| 4. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY)(GROUND LEVEL) | |
| 5. | 8W-8528 | [5] | SLEEVE | |
| 6. | 106-0800 | [1] | CONNECTOR GP (REMOTE JUMP START, POSITIVE) | |
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 277-5777 | [1] | COVER-TERMINAL | ||
| 4D-5243 | [1] | LOCKWASHER | ||
| 9B-9146 | [1] | NUT-SPECIAL (3/8-16-THD) | ||
| 7. | 122-4026 | [1] | SPACER (13X25X25-MM THK) | |
| 8. | 141-2316 | [1] | COVER | |
| 9. | 171-2039 M | [2] | BOLT-SOCKET HEAD (M8X1.25X30-MM) | |
| 10. | 206-2423 | [1] | SADDLE-MOUNTING | |
| 11. | 221-3352 | [1] | COVER | |
| 12. | 230-6368 | [1] | BATTERY (12-VOLT) | |
| 13. | 263-6556 M | [1] | STUD (M10X1.5-THD) | |
| 14. | 290-6746 | [1] | CABLE AS | |
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(7-CM) | |||
| 311-6184 | [1] | TERMINAL-RING (2-GA, 3/8-IN SCREW) | ||
| 312-6455 | [1] | TERMINAL AS | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 15. | 331-5550 | [1] | CABLE AS (POSITIVE) | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | ||
| 8U-0767 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 030-1705 | [1] | TERMINAL-CABLE (00-GA, 5/16-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(60-CM) | |||
| 16. | 331-5555 | [1] | CABLE AS-BATTERY | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | ||
| 8U-0767 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 030-1705 | [1] | TERMINAL-CABLE (00-GA, 5/16-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 159-8050 E | CABLE (00-GA, BLACK)(98-CM) | |||
| 17. | 331-5556 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 159-8050 E | CABLE (00-GA, BLACK)(58-CM) | |||
| 274-9183 | [1] | TERMINAL-RING (00-GA, 1/2-IN SCREW) | ||
| 18. | 331-5581 | [1] | BRACKET AS | |
| 19. | 360-1845 | [1] | FILM-IDENTIFICATION (JUMP START) | |
| 20. | 360-8983 | [2] | ROD | |
| 21. | 360-8984 | [1] | ANGLE | |
| 22. | 362-2904 | [1] | PLATE AS | |
| 23. | 362-8030 | [1] | BRACKET AS | |
| 24. | 368-4714 | [1] | CABLE AS (POSITIVE) | |
| 1S-7252 | [2] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(96-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 25. | 383-2789 | [1] | COVER | |
| 26. | 383-8936 | [1] | STUD | |
| 27. | 383-8937 | [1] | RECEPTACLE | |
| 28. | 387-6507 | [1] | CABLE AS | |
| 135-2543 | [1] | BOOT (RED) | ||
| 6T-5598 | [1] | TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 278-1438 | [1] | TERMINAL-RING | ||
| 29. | 387-6669 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(13-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(149-CM) | |||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 30. | 387-6703 | [1] | CLIP-CABLE | |
| 31. | 388-5359 | [1] | RETAINER | |
| 32. | 389-6179 | [1] | BRACKET AS | |
| 33. | 425-9687 | [1] | BRACKET AS | |
| 9G-9155 | [2] | CLIP | ||
| 34. | 432-5956 | [1] | COVER | |
| 35. | 437-2211 | [1] | FILM-IDENTIFICATION (12-VOLT) | |
| 36. | 469-9327 | [1] | BRACKET | |
| 37. | 092-5524 M | [1] | BOLT (M12X1.75X80-MM) | |
| 38. | 127-2170 M | [4] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 39. | 138-7500 | [1] | SPACER (11X25X50-MM THK) | |
| 40. | 1S-0994 | [3] | CLIP (LOOP) | |
| 41. | 243-5027 M | [1] | NUT (M6X1-THD) | |
| 42. | 4B-4280 | [2] | WASHER (13.5X27X2.5-MM THK) | |
| 43. | 4P-7581 | [1] | CLIP (LADDER) | |
| 44. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 45. | 5G-3676 | [2] | GROMMET | |
| 46. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 47. | 5T-6374 | [1] | SPACER (11X20X40-MM THK) | |
| 48. | 5W-2177 M | [1] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 49. | 7C-4354 | [2] | CLIP | |
| 51. | 7P-1695 | [1] | WASHER (10.5X19X3-MM THK) | |
| 52. | 7X-3370 M | [1] | BOLT (M8X1.25X20-MM) | |
| 53. | 8F-3590 | [1] | LOCKWASHER | |
| 54. | 8F-7242 | [4] | WASHER (8.7X15.9X1.6-MM THK) | |
| 55. | 8T-1887 | [3] | CLIP (SLOT) | |
| 56. | 8T-1888 | [3] | CLIP (TAB) | |
| 57. | 8T-3998 M | [2] | BOLT (M4X0.7X12-MM) | |
| 58. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 59. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 60. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 61. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 62. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| 63. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 64. | 8T-4196 M | [5] | BOLT (M10X1.5X35-MM) | |
| 65. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 66. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 67. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 68. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 69. | 8T-7963 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 70. | 8X-5489 | [3] | SLEEVE | |
| 71. | 9B-0453 | [1] | LOCKWASHER | |
| 72. | 8T-4121 B | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 73. | 8T-4195 BM | [1] | BOLT (M10X1.5X30-MM) | |
| 74. | 8T-4121 B | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 75. | 8T-4137 BM | [1] | BOLT (M10X1.5X20-MM) | |
| 76. | 469-9328 | [1] | BRACKET AS | |
| 77. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 78. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 79. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP76720149
387-6670: BATTERY & WIRING GP
387-6670 BATTERY & WIRING GP -DISCONNECT
S/N LBS1-UP
PART OF 485-5499, 485-5502 ENGINE AR-COMPLETE
Type 2
AN ATTACHMENT
S/N LBS1-UP
PART OF 485-5499, 485-5502 ENGINE AR-COMPLETE
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 420F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8320 | [1] | PLATE-INSTRUCTION (BATTERY)(DISCONNECT SWITCH) | |
| 2. | 3S-2093 | [3] | STRAP-CABLE | |
| 3. | 7K-1181 | [4] | STRAP-CABLE | |
| 4. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY)(GROUND LEVEL) | |
| 5. | 8W-8528 | [5] | SLEEVE | |
| 6. | 106-0800 | [1] | CONNECTOR GP (REMOTE JUMP START, POSITIVE) | |
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 277-5777 | [1] | COVER-TERMINAL | ||
| 4D-5243 | [1] | LOCKWASHER | ||
| 9B-9146 | [1] | NUT-SPECIAL (3/8-16-THD) | ||
| 7. | 141-2316 | [1] | COVER | |
| 8. | 171-2039 M | [2] | BOLT-SOCKET HEAD (M8X1.25X30-MM) | |
| 9. | 221-3352 | [1] | COVER | |
| 10. | 230-6368 | [1] | BATTERY (12-VOLT)(MAINTENANCE FREE) | |
| 11. | 263-6556 M | [1] | STUD (M10X1.5-THD) | |
| 12. | 290-6746 | [1] | CABLE AS | |
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(7-CM) | |||
| 311-6184 | [1] | TERMINAL-RING (2-GA, 3/8-IN SCREW) | ||
| 312-6455 | [1] | TERMINAL AS | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 13. | 331-5550 | [1] | CABLE AS (POSITIVE) | |
| 260-5151 | [1] | TERMINAL-BATTERY | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | ||
| 8U-0767 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 030-1705 | [1] | TERMINAL-CABLE (00-GA, 5/16-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(60-CM) | |||
| 14. | 331-5555 | [1] | CABLE AS-BATTERY | |
| 356-2508 | [1] | TERMINAL-BATTERY (NEGATIVE) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | ||
| 8U-0767 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 030-1705 | [1] | TERMINAL-CABLE (00-GA, 5/16-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 159-8050 E | CABLE (00-GA, BLACK)(98-CM) | |||
| 15. | 331-5556 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 159-8050 E | CABLE (00-GA, BLACK)(58-CM) | |||
| 274-9183 | [1] | TERMINAL-RING (00-GA, 1/2-IN SCREW) | ||
| 16. | 331-5581 | [1] | BRACKET AS | |
| 17. | 360-1845 | [1] | FILM-IDENTIFICATION (JUMP START) | |
| 18. | 360-8983 | [2] | ROD | |
| 19. | 360-8984 | [1] | ANGLE | |
| 20. | 362-2904 | [1] | PLATE AS | |
| 21. | 362-8030 | [1] | BRACKET AS | |
| 22. | 368-4714 | [1] | CABLE AS (POSITIVE) | |
| 1S-7252 | [2] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(96-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 23. | 387-6507 | [1] | CABLE AS | |
| 135-2543 | [1] | BOOT (RED) | ||
| 6T-5598 | [1] | TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 278-1438 | [1] | TERMINAL-RING | ||
| 24. | 387-6669 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(13-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(149-CM) | |||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 25. | 387-6703 | [1] | CLIP-CABLE | |
| 26. | 389-6179 | [1] | BRACKET AS | |
| 27. | 432-5956 | [1] | COVER | |
| 28. | 437-2211 | [1] | FILM-IDENTIFICATION (12-VOLT) | |
| 29. | 509-9930 C | [1] | COVER | |
| 30. | 512-5115 C | [1] | PLATE | |
| 31. | 512-5170 C | [1] | BRACKET AS | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 32. | 512-5180 C | [1] | BRACKET AS | |
| 6V-8143 M | [2] | STUD-WELD (M8X1.25X20-MM) | ||
| 33. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 34. | 092-5524 M | [1] | BOLT (M12X1.75X80-MM) | |
| 35. | 122-4026 | [1] | SPACER (13X25X25-MM THK) | |
| 36. | 127-2170 M | [6] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 37. | 138-7500 | [1] | SPACER (11X25X50-MM THK) | |
| 38. | 1S-0994 | [3] | CLIP (LOOP) | |
| 39. | 206-2423 | [1] | SADDLE-MOUNTING | |
| 40. | 243-5027 M | [1] | NUT (M6X1-THD) | |
| 41. | 3T-0852 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 42. | 4B-4280 | [2] | WASHER (13.5X27X2.5-MM THK) | |
| 43. | 4P-7581 | [1] | CLIP (LADDER) | |
| 44. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 45. | 5G-3676 | [2] | GROMMET | |
| 46. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 47. | 5T-6374 | [1] | SPACER (11X20X40-MM THK) | |
| 48. | 5W-2177 M | [1] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 49. | 7C-4354 | [2] | CLIP | |
| 50. | 7P-1695 | [1] | WASHER (10.5X19X3-MM THK) | |
| 51. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 52. | 105-3481 M | [1] | BOLT-SOCKET HEAD (M8X1.25X20-MM) | |
| 53. | 8F-3590 | [1] | LOCKWASHER | |
| 54. | 8F-7242 | [4] | WASHER (8.7X15.9X1.6-MM THK) | |
| 55. | 8T-1887 | [3] | CLIP (SLOT) | |
| 56. | 8T-1888 | [3] | CLIP (TAB) | |
| 57. | 8T-3998 M | [2] | BOLT (M4X0.7X12-MM) | |
| 58. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
| 59. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 60. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 61. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| 62. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 63. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 64. | 8T-4195 BM | [1] | BOLT (M10X1.5X30-MM) | |
| 65. | 8T-4196 M | [5] | BOLT (M10X1.5X35-MM) | |
| 66. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 67. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 68. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 69. | 8X-5489 | [3] | SLEEVE | |
| 70. | 9B-0453 | [1] | LOCKWASHER | |
| 71. | 9X-2616 CM | [2] | SCREW-SOCKET (M8X1.25X16-MM) | |
| 73. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 76. | 7X-7877 E | STRIP-EDGE (10-CM) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
PUMP GP-FUEL INJECTION
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Disassembly and Assembly
Service Magazine
