AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

435-7778 CAMSHAFT GP S/N G9F1-UP PART OF 478-5231 ENGINE AR-PRIMARY 320D2 GC EXCAVATOR


BASIC ENGINE
CAMSHAFT GP
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

EXCAVATOR 320D2 GC EXCAVATOR PFE
 320D2 GC Excavator PFE00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP7702 320D2 GC PFE   (2015)

BASIC ENGINE

CAMSHAFT GP
CAMSHAFT GP
435-7778 CAMSHAFT GP
 

#SEBP77020020
 

435-7778: CAMSHAFT GP

435-7778 CAMSHAFT GP
S/N G9F1-UP
PART OF 478-5231 ENGINE AR-PRIMARY
i06281683 SEBP7702
4357778 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 278-5126 [8] PUSHROD  
2. 315-3384 [8] TAPPET  
3. 454-0683 [1] CAMSHAFT GP  
3A. 067-6135 [1] KEY-WOODRUFF  
 

#SEBP77020021
 

392-9460: COVER GP-VALVE MECHANISM

392-9460 COVER GP-VALVE MECHANISM
S/N G9F1-UP
PART OF 418-6381 COVER GP-VALVE MECHANISM
i06304943 SEBP7702
3929460 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-9245 M [3] SCREW (M4X0.7X10-MM)  
2. 369-3869 [1] CAP AS-ENGINE OIL FILLER  
2A. 357-0147 [1] FILM-IDENTIFICATION (OIL FILL, READ OMM)  
2B. 124-0506 [1] SEAL  
3. 380-9615 [1] BREATHER  
4. 392-9459 [1] COVER-VALVE MECHANISM  
5. 474-0599 [1] SEAL  
6. 326-7289 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP77020022
 

418-6381: COVER GP-VALVE MECHANISM

418-6381 COVER GP-VALVE MECHANISM
S/N G9F1-UP
PART OF 478-5231 ENGINE AR-PRIMARY
Type 1
i06281361 SEBP7702
4186381 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3895 M [7] BOLT (M8X1.25X35-MM)  
2. 103-5705 M [4] BOLT (M8X1.25X110-MM)  
3. 392-9460 Y [1] COVER GP-VALVE MECHANISM  
4. 392-9472 [1] GASKET (VALVE COVER)  
5. 455-6923 [1] COVER-BASE  
6. 6I-0217 M [10] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP77020023
 

418-6381: COVER GP-VALVE MECHANISM

418-6381 COVER GP-VALVE MECHANISM
S/N G9F1-UP
PART OF 478-5231 ENGINE AR-PRIMARY
Type 2
i07714000 SEBP7702
4186381 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3895 M [7] BOLT (M8X1.25X35-MM)  
2. 103-5705 M [4] BOLT (M8X1.25X110-MM)  
3. 571-1821 CY [1] COVER GP-VALVE MECHANISM  
4. 392-9472 [1] GASKET (VALVE COVER)  
5. 455-6923 [1] COVER-BASE  
6. 6I-0217 M [10] BOLT (M8X1.25X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP77020024
 

571-1821: COVER GP-VALVE MECHANISM

571-1821 COVER GP-VALVE MECHANISM
S/N G9F1-UP
PART OF 418-6381 COVER GP-VALVE MECHANISM
i07713961 SEBP7702
5711821 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-9245 M [3] SCREW (M4X0.7X10-MM)  
2. 369-3869 [1] CAP AS-ENGINE OIL FILLER  
2A. 357-0147 [1] FILM-IDENTIFICATION (OIL FILL, READ OMM)  
2B. 124-0506 [1] SEAL  
3. 380-9615 [1] BREATHER  
4. 326-7289 [1] SEAL-O-RING  
5. 474-0599 [1] SEAL  
  M   METRIC PART
 

#SEBP77020025
 

433-6323: CRANKSHAFT GP

433-6323 CRANKSHAFT GP
S/N G9F1-UP
PART OF 478-5231 ENGINE AR-PRIMARY
i06281681 SEBP7702
4336323 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 032-9090 [2] WASHER-THRUST (STANDARD-UPPER)(S)  
2. 339-8780 [1] DOWEL  
3. 341-4028 [1] RING-TIMING  
4. 475-8373 C [1] CRANKSHAFT GP  
4A. 455-3693 [1] CRANKSHAFT  
5. 216-8314 [1] GEAR-CRANKSHAFT (34-TEETH)  
6. 276-7394 M [3] SCREW (M6X1XX12-MM)  
7. 032-9091 [2] WASHER-THRUST (STANDARD-LOWER)  
8. 067-6135 [1] KEY-WOODRUFF (CRANKSHAFT)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP77020026
 

433-6323: CRANKSHAFT GP

433-6323 CRANKSHAFT GP
S/N G9F1-UP
PART OF 452-7386 CYLINDER BLOCK GP-SHORT, 478-5231 ENGINE AR-PRIMARY
i06938026 SEBP7702
4336323 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. CJ [2] PLATE-THRUST (STANDARD)  
2. 339-8780 [1] DOWEL  
3. 341-4028 [1] RING-TIMING  
4. 475-8373 [1] CRANKSHAFT GP  
4A. 455-3693 [1] CRANKSHAFT  
5. 216-8314 [1] GEAR-CRANKSHAFT (34-TEETH)  
6. 276-7394 M [3] SCREW (M6X1XX12-MM)  
7. CJ [2] PLATE-THRUST (STANDARD)  
8. 067-6135 [1] KEY-WOODRUFF (CRANKSHAFT)  
   
  CFP [1] BEARING (STANDARD-UPPER)  
  CFP [5] BEARING (STANDARD-LOWER)  
  CF [4] BEARING (STANDARD-UPPER)  
   
    AVAILABLE REPAIR KIT(S):
  518-5437 BP [1] KIT-BEARING  
    (INCLUDES BEARINGS)
  518-5440 AB KIT-BEARING (0.254-MM US)  
  518-5441 AB KIT-BEARING (0.508-MM US)  
  518-5885 AB KIT-BEARING (0.762-MM US)  
    (EACH BEARING KIT INCLUDES BEARINGS)
  518-5891 J [1] KIT-WASHER (STANDARD)  
    (INCLUDES WASHERS)
  518-5892 AB KIT-WASHER (0.191-MM US)  
  518-5893 AB KIT-WASHER (STANDARD, 0.191-MM US)  
    (EACH WASHER KIT INCLUDES WASHERS)
  360-3986 AB KIT-BEARING (CONNECTING ROD)  
  468-7762 AB KIT-BEARING (0.254-MM US)  
  468-7769 AB KIT-BEARING (0.508-MM US)  
  468-7770 AB KIT-BEARING (0.762-MM US)  
    (EACH BEARING KIT INCLUDES BEARINGS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  P   KIT MARKED P SERVICES PART(S) MARKED P
 

#SEBP77020027
 

510-5297: CRANKSHAFT GP

510-5297 CRANKSHAFT GP
S/N G9F1-UP
PART OF 478-5231 ENGINE AR-PRIMARY
i07143171 SEBP7702
5105297 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. CJ [2] PLATE-THRUST (STANDARD)(UPPER)  
2. CJ [2] PLATE-THRUST (STANDARD)(LOWER)  
3. 067-6135 [1] KEY-WOODRUFF  
4. 276-7394 M [3] SCREW (M6X1XX12-MM)  
5. 339-8780 [1] DOWEL  
6. 341-4028 [1] RING-TIMING  
7. 448-2620 [1] CRANKSHAFT AS  
8. 216-8314 [1] GEAR-CRANKSHAFT (34-TEETH)  
9. N [5] BEARING  
10. N [1] BEARING  
11. [4] BEARING  
   
    AVAILABLE REPAIR KIT(S):
  518-5437 N [1] KIT-BEARING (CRANKSHAFT)  
    (INCLUDES BEARINGS)
  518-5440 AB KIT-BEARING (0.254-MM US)(0.254-MM US)  
    (INCLUDES BEARINGS)
  518-5441 AB KIT-BEARING (0.508-MM US)(0.50-MM US)  
    (INCLUDES BEARINGS)
  518-5885 AB KIT-BEARING (0.762-MM US)(0.75-MM US)  
    (INCLUDES BEARINGS)
  518-5891 J [1] KIT-WASHER (STANDARD)(CRANKSHAFT)  
    (INCLUDES THRUST WASHERS)
  518-5892 AB KIT-WASHER (0.191-MM US)  
    (INCLUDES THRUST WASHERS)
  518-5893 AB KIT-WASHER (STANDARD, 0.191-MM US)  
    (INCLUDES THRUST WASHERS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  N   KIT MARKED N SERVICES PART(S) MARKED N
 

#SEBP77020028
 

415-3299: CYLINDER BLOCK GP

415-3299 CYLINDER BLOCK GP
S/N G9F1-UP
PART OF 452-7386 CYLINDER BLOCK GP-SHORT, 478-5231 ENGINE AR-PRIMARY
i06280846 SEBP7702
4153299 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 209-9219 M [10] BOLT (M8X1.25X16-MM)  
2. 232-7449 [1] HOUSING AS  
3. 451-7736 Y [1] CYLINDER BLOCK GP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP77020029
 

451-7736: CYLINDER BLOCK GP

451-7736 CYLINDER BLOCK GP
S/N G9F1-UP
PART OF 415-3299 CYLINDER BLOCK GP
i06304944 SEBP7702
4517736 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 035-8068 [10] BOLT (5/8-18X3.75-IN)  
2. 067-6006 [1] PLUG (CYLINDER BLOCK)  
3. 067-6043 [1] PLUG-SIDE  
4. 185-0884 [2] DOWEL  
5. 225-8858 [2] PLUG  
6. 232-7596 [1] PLUG  
7. 232-7597 [2] PLUG  
8. 232-7599 [1] PLUG  
9. 366-8853 [1] BEARING  
10. 067-6002 [10] DOWEL  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

Information:

Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Disassembly and Assembly
Camshaft - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
C4.4 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 320D2 GC :

BELT TENSIONER GP
416-1046 BELT TENSIONER GP
518-9682 INSTALLATION AR-ENGINE
472-2135 INSTALLATION AR-ENGINE
478-5231 ENGINE AR-PRIMARY
472-2129 ENGINE AR-COMPLETE
397-4688 OPTION AR-REGIONAL
471-6682 GENERAL AR
512-1033 DISTRIBUTION AR
COVER GP-VALVE MECHANISM
392-9460 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
418-6381 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
418-6381 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
571-1821 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
433-6323 CRANKSHAFT GP
CRANKSHAFT GP
433-6323 CRANKSHAFT GP
CRANKSHAFT GP
510-5297 CRANKSHAFT GP
CYLINDER BLOCK GP
415-3299 CYLINDER BLOCK GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.