ELECTRICAL AND STARTING SYSTEM
CONVERSION GPALTERNATOR GP-CHARGING
HARNESS GP
STARTING MOTOR GP
SENSOR GP
ELECTRICAL AND STARTING SYSTEM
CONVERSION GP#SEBP78070110
479-3352: CONVERSION GP-ELECTRICAL
479-3352 CONVERSION GP-ELECTRICAL -REPOWER
S/N 9PP1-UP
PART OF 479-3351 CONVERSION AR-MACHINE
FOR USE WITH TIER II EMISSIONS REPOWER UPGRADE
S/N 9PP1-UP
PART OF 479-3351 CONVERSION AR-MACHINE
FOR USE WITH TIER II EMISSIONS REPOWER UPGRADE
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 254-3783 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT) | ||
| 9G-8451 | [1] | BLOCK AS | ||
| 1H-3244 | [1] | LOCKWASHER | ||
| 4B-4276 | [2] | WASHER (7X16X1.6-MM THK) | ||
| 4L-7124 | [1] | BOLT (1/4-20X1.25-IN) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 4L-6454 | [3] | BOLT (3/8-16X1-IN) | ||
| 5C-9553 M | [2] | BOLT (M6X1X16-MM) | ||
| 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | ||
| 8T-4138 M | [2] | BOLT (M6X1X20-MM) | ||
| 8T-4184 M | [2] | BOLT (M12X1.75X45-MM) | ||
| 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | ||
| 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | ||
| 1W-8795 | [1] | BRACKET | ||
| 4P-7048 | [1] | BRACKET | ||
| 186-9694 | [1] | BRACKET AS | ||
| 227-0217 | [1] | PAD | ||
| 186-9697 | [2] | BUS BAR AS | ||
| 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE) | ||
| 1H-3244 | [2] | LOCKWASHER | ||
| 4E-5724 | [2] | WASHER (7X12X1-MM THK) | ||
| 8T-0122 | [2] | NUT-FULL (1/4-28-THD) | ||
| 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE) | ||
| 1H-3244 | [2] | LOCKWASHER | ||
| 4E-5724 | [2] | WASHER (7X12X1-MM THK) | ||
| 8T-0122 | [2] | NUT-FULL (1/4-28-THD) | ||
| 1S-0994 | [1] | CLIP (LOOP) | ||
| 2T-3019 | [1] | CLIP | ||
| 4D-7794 | [4] | CLIP | ||
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 4P-8134 | [1] | CLIP (LADDER) | ||
| 5P-4295 | [1] | CLIP | ||
| 6K-8178 | [1] | CLIP | ||
| 7N-3718 | [1] | CLIP | ||
| 8D-9671 | [1] | CLIP | ||
| 9M-8406 | [1] | CLIP (LOOP) | ||
| 116-0118 | [4] | CLIP | ||
| 124-0174 | [1] | CLIP | ||
| 183-4403 | [1] | CLIP (LOOP) | ||
| 352-3964 | [1] | CLIP (LADDER) | ||
| 475-9742 | [1] | HARNESS AS-POWER | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 321-4628 E | SLEEVE (103-CM) | |||
| 321-4630 E | SLEEVE (88-CM) | |||
| 389-8850 | [1] | RECEPTACLE AS (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 237-0165 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 8T-8737 | [78] | PLUG-SEAL | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3402 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2252 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 6I-4348 | [1] | BOOT (40-PIN) | ||
| 9X-3401 | [27] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 391-2475 | [1] | HARNESS AS-SENSOR (COOLANT LEVEL) | ||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 300-4855 | [2] | BOOT (3-PIN) | ||
| 316-2969 | [1] | HARNESS AS-WIRING (DIODE ASSEMBLY) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 186-8312 | [1] | DIODE | ||
| 210-5732 | [1] | ENCAPSULANT | ||
| 300-4873 | [1] | BOOT (2-PIN) | ||
| 309-5036 | [1] | BOOT (2-PIN) | ||
| 316-2934 | [1] | PLUG | ||
| [1] | CONDUIT | |||
| 384-0020 | [1] | HARNESS AS-WIRING (STARTING MOTOR) | ||
| 108-2515 | [2] | COVER-TERMINAL | ||
| 321-4628 E | SLEEVE (59-CM) | |||
| 390-8416 | [1] | MOUNT | ||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 5C-7261 M | [1] | NUT (M8X1.25-THD) | ||
| 6V-8801 | [3] | NUT (3/8-16-THD) | ||
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 363-0037 | [1] | PLATE | ||
| 5L-4507 | [4] | SCREW-MACHINE (10-32X0.875-IN) | ||
| 9X-6258 | [4] | SCREW-MACHINE (6-32X0.5-IN) | ||
| 3S-2093 | [15] | STRAP-CABLE | ||
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 4B-5324 | [4] | WASHER (3.9X9.6X1.2-MM THK) | ||
| 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | ||
| 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 384-0018 | [1] | WIRE AS | ||
| 384-0019 | [1] | WIRE AS | ||
| 391-9075 | [1] | WIRE AS | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP78070111
385-9753: GUARD GP-ALTERNATOR
For full view, you need register
#SEBP78070112
417-5561: HARNESS AS-ENGINE
417-5561 HARNESS AS-ENGINE
S/N TXE1-UP
PART OF 417-5560 WIRING GP-ELECTRONIC CONTROL
S/N TXE1-UP
PART OF 417-5560 WIRING GP-ELECTRONIC CONTROL
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 261-5510 | [3] | BOOT | ||
| [1] | BOOT (3-PIN) | |||
| 300-4870 | [2] | BOOT (4-PIN) | ||
| 300-4875 | [3] | BOOT (2-PIN) | ||
| 309-5037 | [11] | BOOT (6-PIN) | ||
| 344-2466 | [1] | COVER AS | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH INCLUDES RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 160-8123 | [1] | PLUG AS | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 160-8124 | [1] | PLUG AS (2-PIN) | ||
| 8T-8737 | PLUG-SEAL | |||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [6] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 278-8844 | [1] | PLUG AS-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [116] | PLUG-SEAL | ||
| 212-4331 | [1] | RECEPTACLE AS (4-PIN) | ||
| 213-1434 | [1] | RECEPTACLE AS (12-PIN) | ||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 230-4012 | [2] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 321-4624 E | SLEEVE (88-CM) | |||
| 321-4625 E | SLEEVE (159-CM) | |||
| 321-4628 E | SLEEVE (111-CM) | |||
| 321-4630 E | SLEEVE (61-CM) | |||
| 9X-3402 | [84] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [3] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(108-MM) | |||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(56-CM) | |||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP78070113
387-1983: HARNESS AS-WIRING
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 309-5037 | [1] | BOOT (6-PIN) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 278-8844 | [1] | PLUG AS-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 321-4625 E | SLEEVE (12-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP78070114
418-7614: HARNESS AS-WIRING
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS#SEBP78070115
3T-9525: PLATE AS-BRUSH
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-0372 | [1] | PLATE | |
| 2. | 6T-0371 | [1] | INSULATOR | |
| 3. | 9F-5599 | [12] | LOCKWASHER | |
| 4. | 6T-0363 | [6] | HOLDER AS-BRUSH | |
| (EACH INCLUDES) | ||||
| 3T-9494 | [1] | SPRING | ||
| 5. | 3T-4709 | [3] | PLATE | |
| 6. | 3T-4710 | [3] | PLATE | |
| 7. | 2L-6679 | [3] | PLATE-INSULATOR | |
| 8. | 7F-3525 | [6] | WASHER-SPECIAL (0.207X0.39X0.09-IN THK) | |
| 9. | 5P-6298 | [12] | SCREW-MACHINE (10-32X0.5-IN) | |
#SEBP78070116
381-1729: SENSOR GP-ENGINE
381-1729 SENSOR GP-ENGINE
S/N TXE1-11348
S/N TXE1-11348
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 7K-1181 | [2] | STRAP-CABLE | |
| 3. | 7X-1171 | [1] | ADAPTER AS | |
| 1U-5795 | [1] | FERRULE | ||
| 4. | 347-4734 | [1] | CLIP | |
| 5. | 125-5835 | [1] | PLUG-FELT | |
| 6. | 178-1781 | [1] | CLIP | |
| 7. | 389-3713 | [1] | ELBOW AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 234-4355 | ADAPTER-O-RING | |||
| 8. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 9. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (AIR INLET) | |
| 10. | 249-0096 Y | [1] | SENSOR GP-PRESSURE (AIR INLET) | |
| 11. | 274-6719 | [1] | SENSOR GP-PRESSURE (OIL PRESSURE) | |
| 12. | 300-9806 Y | [1] | SENSOR GP-SPEED (ENGINE SPEED) | |
| 13. | 305-6873 | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC PRESSURE) | |
| 14. | 364-8174 | [1] | ELBOW AS | |
| 117-0067 | [1] | ELBOW | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 15. | 443-4151 | [1] | BRACKET | |
| 16. | 384-1836 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
| 17. | 387-1994 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
| 18. | 132-5789 | [1] | CLIP (LADDER) | |
| 19. | 214-7566 | [1] | SEAL-O-RING | |
| 20. | 7W-9094 | [1] | SPACER (10.5X20X9-MM THK) | |
| 21. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 329-5451 | [1] | ADAPTER AS | |
| 9X-0261 | [1] | ADAPTER | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 23. | 9M-8406 | [1] | CLIP (LOOP) | |
| 24. | 4P-7581 | [1] | CLIP (LADDER) | |
| 25. | 6V-5215 M | [3] | BOLT (M8X1.25X16-MM) | |
| 26. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 27. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 29. | 8T-4970 M | [1] | BOLT (M6X1X14-MM) | |
| 30. | 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| 32. | 198-4766 | [1] | WASHER-HARD (11X25X10-MM THK) | |
| 33. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP78070117
381-1729: SENSOR GP-ENGINE
381-1729 SENSOR GP-ENGINE
S/N TXE11349-UP
S/N TXE11349-UP
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [3] | STRAP-CABLE | |
| 2. | 7K-1181 | [2] | STRAP-CABLE | |
| 3. | 7X-1171 | [1] | ADAPTER AS | |
| 1U-5795 | [1] | FERRULE | ||
| 4. | 347-4734 | [1] | CLIP | |
| 5. | 125-5835 | [1] | PLUG-FELT | |
| 6. | 178-1781 | [1] | CLIP | |
| 7. | 389-3713 | [1] | ELBOW AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 234-4355 | ADAPTER-O-RING | |||
| 8. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 9. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (AIR INLET) | |
| 10. | 249-0096 Y | [1] | SENSOR GP-PRESSURE (AIR INLET) | |
| 11. | 274-6719 | [1] | SENSOR GP-PRESSURE (OIL PRESSURE) | |
| 12. | 300-9806 Y | [1] | SENSOR GP-SPEED (ENGINE SPEED) | |
| 13. | 305-6873 | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC PRESSURE) | |
| 14. | 364-8174 | [1] | ELBOW AS | |
| 117-0067 | [1] | ELBOW | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 15. | 443-4151 | [1] | BRACKET | |
| 16. | 384-1836 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
| 17. | 387-1994 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
| 18. | 132-5789 C | [2] | CLIP (LADDER) | |
| 19. | 214-7566 | [1] | SEAL-O-RING | |
| 20. | 7W-9094 | [1] | SPACER (10.5X20X9-MM THK) | |
| 21. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 329-5451 | [1] | ADAPTER AS | |
| 9X-0261 | [1] | ADAPTER | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 23. | 9M-8406 | [1] | CLIP (LOOP) | |
| 24. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 25. | 6V-5215 M | [3] | BOLT (M8X1.25X16-MM) | |
| 26. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 27. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 29. | 8T-4970 M | [1] | BOLT (M6X1X14-MM) | |
| 30. | 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| 32. | 198-4766 | [1] | WASHER-HARD (11X25X10-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP78070118
249-0096: SENSOR GP-PRESSURE
For full view, you need register
Parts for your R1600G LOAD HAUL DUMP:
CATERPILLAR SIS#SEBP78070119
300-9805: SENSOR GP-SPEED
For full view, you need register
