1026683 SEGMENT Caterpillar parts
Rating:
Alternative (cross code) number:
CA1026683
102-6683
1026683
CA1026683
102-6683
1026683
Weight: 49 pounds 22 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
4pcs Diamond Sanding Pads, Grit 60/100/200/400 Diamond Hand Polishing Block Diamond Hand Pads Foam Backing for Ceramic Tile Glass Stone Granite Wood Marble Metal
PEUTIER Package Contents: You will receive 4 diamond hand polishing pads, including 60/100/200/400 grit, various choices from coarse to ultra-fine to meet your different polishing needs. The size of a single hand sanding block is 9.2x6.2x3.1cm/3.62x2.44x1.22in. || Premium Material: Our diamond sanding pads are made of super abrasive diamond and sponge, long-lasting and reusable. The soft sponge backing ensures that users can easily use these pads for increased comfort. || Wet and Dry Use: The diamond sanding block Can be used for wet and dry polishing, the foam backing has water storage function, which can improve work efficiency. || Recommended Use: Our diamond sanding pads come in 4 different grit sizes. Grit 60 is great for granite and marble, Grit 100 is great for tile and wood surfaces, Grit 200 is great for glass, and Grit 400 allows for a finer polish. || Wide Applications: The Diamond hand polishing pads are suitable for flat, edge and contoured surfaces and can be widely used in stone grinding, tile trimming, glass burr trimming, metal polishing renovation, etc.
PEUTIER Package Contents: You will receive 4 diamond hand polishing pads, including 60/100/200/400 grit, various choices from coarse to ultra-fine to meet your different polishing needs. The size of a single hand sanding block is 9.2x6.2x3.1cm/3.62x2.44x1.22in. || Premium Material: Our diamond sanding pads are made of super abrasive diamond and sponge, long-lasting and reusable. The soft sponge backing ensures that users can easily use these pads for increased comfort. || Wet and Dry Use: The diamond sanding block Can be used for wet and dry polishing, the foam backing has water storage function, which can improve work efficiency. || Recommended Use: Our diamond sanding pads come in 4 different grit sizes. Grit 60 is great for granite and marble, Grit 100 is great for tile and wood surfaces, Grit 200 is great for glass, and Grit 400 allows for a finer polish. || Wide Applications: The Diamond hand polishing pads are suitable for flat, edge and contoured surfaces and can be widely used in stone grinding, tile trimming, glass burr trimming, metal polishing renovation, etc.
For full view, you need register
Information:
Table 15
349E and 349F Machine
Stick Length J K L M N P
3.35 m (11 ft) 2050.7 mm (80.7 inch) 2000.7 mm (78.8 inch) 273.4 mm (10.8 inch) 2050.7 mm (80.7 inch) 2000.7 mm (78.8 inch) 273.4 mm (10.8 inch)
3.9 m (12.8 ft) 2570 mm (101.2 inch) 2520 mm (99.2 inch) 272 mm (10.7 inch) 2566.3 mm (101 inch) 2516.3 mm (99.1 inch) 273 mm (10.7 inch)
Make a continuous extension of the root pass and fillet weld to a length of 30 mm (1.18 inch) (R) tapering to a 3 mm (0.19 inch) in height in that distance. Grind surfaces to flush at each end.
Allow the welded areas to cool.
Prepare the welded areas for paint.
Apply a rust prevention coat and a finish coat.Circuit Installation
Required Hydraulic Circuit Installation
The hydraulic excavator must be equipped with an auxiliary hydraulic circuit. This circuit will connect the thumb to the attachment spool of the main valve on the hydraulic excavator. This connection will allow hydraulic pressure to flow to and from the thumb. This circuit must be a one pump, two direction flow circuits.Setting Flows and Pressures
Refer to the host machine maintenance manual for the proper procedure to adjust the flow and pressure on the machine.
Release all air from the hydraulic system.
Test and adjust the maximum flows and pressures of the auxiliary hydraulic system as needed. Refer to Table 16 below for the maximum allowable pressures and flows for the thumb circuit.
Table 16
Maximum Flow and Pressure Settings
Machine Maximum Extended Cylinder Pressure Maximum Flow Maximum Retracted Cylinder Pressure
319D and 320D 20500 kPa (3000 psi) 214 L/min (56.5 US gpm) 20500 kPa (3000 psi)
324D 20500 kPa (3000 psi) 231 L/min (61 US gpm) 20500 kPa (3000 psi)
325D 20500 kPa (3000 psi) 247 L/min (65.5 US gpm) 20500 kPa (3000 psi)
329D 20500 kPa (3000 psi) 247 L/min (65.5 US gpm) 20500 kPa (3000 psi)
320E 20500 kPa (3000 psi) 214 L/min (56.5 US gpm) 20500 kPa (3000 psi)
324E 20500 kPa (3000 psi) 231 L/min (61 US gpm) 20500 kPa (3000 psi)
329E 20500 kPa (3000 psi) 247 L/min (65.5 US gpm) 20500 kPa (3000 psi)
330D 20500 kPa (3000 psi) 280 L/min (74 US gpm) 20500 kPa (3000 psi)
336D 20500 kPa (3000 psi) 280 L/min (74 US gpm) 20500 kPa (3000 psi)
336E and 336F 20500 kPa (3000 psi) 280 L/min (74 US gpm) 20500 kPa (3000 psi)
345D 20500 kPa (3000 psi) 386 L/min (102 US gpm) 20500 kPa (3000 psi)
349E and 349F 20500 kPa (3000 psi) 386 L/min (102 US gpm) 20500 kPa (3000 psi) Air Evacuation Procedure
Note: Without proper air evacuation, cylinder dieseling occurs which has lead or may lead to the deterioration of seals.All cycling of hydraulic cylinders is to be done at engine idle speed. All cylinders shall be
Parts segment Caterpillar catalog:
1026682
SEGMENT
Caterpillar
Caterpillar
1019922
SEGMENT
Caterpillar
Caterpillar
1019921
SEGMENT-
Caterpillar
Caterpillar
0899541
SEGMENT
Caterpillar
Caterpillar
0870280
SEGMENT-VLVE
Caterpillar
Caterpillar
0852629
SEGMENT
Caterpillar
Caterpillar
1288222
SEGMENT
Caterpillar
Caterpillar
1273230
SEGMENT
Caterpillar
Caterpillar
1273121
SEGMENT
Caterpillar
Caterpillar
1172243
SEGMENT
Caterpillar
Caterpillar
1107652
SEGMENT GP
Caterpillar
Caterpillar
1026685
SEGMENT-
Caterpillar
Caterpillar