SEGMENT- 1299207 - Caterpillar

Table 1
Effectivity Of The Secondary Cab Door Release Lever    
Model    Effectivity    Adaptability    
320C FMHW     S/N:SAH1210     S/N:SAH1001-1209    
324D FM     S/N:JKR170
S/N:JLS161     S/N:JKR1-169
S/N:JLS1-160    
324D FM LGP     S/N:JGK127     S/N:JGK1-126    
325D FM     S/N:C7K195
S/N:C8L161     S/N:C7K1-194
S/N:C8L1-160    
330D FM     S/N:H3K227
S/N:L2K216     S/N:H3K1-226
S/N:L2K1-215    
Table 2
Serial Number Effectivity Of The Cab    
Model     Serial Number On The Cab    
300C Excavator Family     S/N: 447-UP    
300D Excavator Family     S/N: 29-UP    Installation Of A Secondary Cab Door Release Lever
Use the information that follows in order to install the secondary cab door release lever.
Table 3
Required Parts    
Item    Qty    Part Number    Description    
1     1     268-9040     Shaft    
2     1     8C-8888     Ball Knob    
3     1     204-6101     Hard Washer    
4     1     8T-0325     Bolt    
5     1     247-5767     Cover    
Illustration 1 g01282483
237-2405 Cab Door Gp (5) 247-5767 Cover
Remove cover (5) from the inside of the cab door gp. The cover must be modified for the installation and movement of the secondary cab door release lever. Refer to Illustration 1.
Illustration 2 g01282485
247-5767 Cover (5) 247-5767 Cover (A) 74.5 mm (2.93 inch) (B) 53 mm (2.1 inch) Radius (C) 37 mm (1.46 inch) Radius (D) 33.8 mm (1.3 inch) (E) 0.7 mm (0.03 inch) (F) 10 mm (0.4 inch) (G) 23.5 mm (0.9 inch) (H) 13.3 mm (0.5 inch) (J) 6.1 mm (0.24 inch) (K) 44.8 mm (1.76 inch) (L) 5 mm (0.2 inch) Radius at two places (M) 8 mm (0.3 inch) Radius at two places
Modify cover (5) by cutting out the slot. Refer to Illustration 2.
Illustration 3 g01282487
170-7708 Latch As (1) 268-9040 Shaft (3) 204-6101 Hard Washer (4) 8T-0325 Bolt
Install shaft (1) on the latch assembly. Use bolt (4) and hard washer (3). Refer to Illustration 3.
Reinstall cover (5) .
Illustration 4 g01282490
170-7708 Latch As (2) 8C-8888 Ball Knob
Install knob (2) on shaft (1). Refer to Illustration 4.