2782360 SEGMENT GP-SPROCKET Caterpillar parts
D5K LGP, D5K2 XL
Rating:
Alternative (cross code) number:
CA2782360
278-2360
2782360
CA2782360
278-2360
2782360
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
2782360 Segment GP (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 94.6 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 94.6 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
2782360 Segment GP (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 94.6 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 94.6 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
This part in 2 request:
Show.
This information for suppliers only!
2021-07-31
2017-11-02
Information:
Disassembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-2264     Puller Group     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Ensure that the valve for the sea water is closed.
Illustration 1 g00810517
Release six screws (19) that fasten end plate (18) to the auxiliary water pump housing (9). Remove the end plate (18) and discard gasket (17) .
Remove end plug (16) from the front end of impeller (15). Discard the end plug.
Remove the impeller (15) from shaft (3). Inspect the impeller for excessive wear or for damage. If necessary, replace the impeller.Note: The auxiliary water pump does not need to be removed from the engine in order to service the impeller.
Remove the auxiliary water pump from the engine. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove" for further information.
Release screw (8) that holds cam (14). Tap the top of the screw with a soft faced hammer in order to separate the cam from pump body (9). Remove the screw and the cam from the pump body.
Remove wear plate (13) from the pump body (9) of the auxiliary water pump.
Remove snap ring (12) which retains washer (11) of the water seal (10). Remove water seal (10) from shaft (3) and discard the water seal. It can be difficult to remove the water seal. Leave the water seal in position until shaft (3) is pressed out of the pump body.Note: The gear for the auxiliary water pump is a pressed fit. If the gear is removed, replace shaft (3) and bearing (4). Also, replace bearing (6) .
Use tool (A) to remove gear (1). Check the gear for damage or for wear. Remove snap ring (2) from the pump body.
Support the drive end of the pump body. Press out shaft (3). Press out bearing (4). Also, press out bearing (6) and seal (7). Remove two spacers (5) and discard the shaft, spacers, bearings, and the seal.
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-2264     Puller Group     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Ensure that the valve for the sea water is closed.
Illustration 1 g00810517
Release six screws (19) that fasten end plate (18) to the auxiliary water pump housing (9). Remove the end plate (18) and discard gasket (17) .
Remove end plug (16) from the front end of impeller (15). Discard the end plug.
Remove the impeller (15) from shaft (3). Inspect the impeller for excessive wear or for damage. If necessary, replace the impeller.Note: The auxiliary water pump does not need to be removed from the engine in order to service the impeller.
Remove the auxiliary water pump from the engine. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove" for further information.
Release screw (8) that holds cam (14). Tap the top of the screw with a soft faced hammer in order to separate the cam from pump body (9). Remove the screw and the cam from the pump body.
Remove wear plate (13) from the pump body (9) of the auxiliary water pump.
Remove snap ring (12) which retains washer (11) of the water seal (10). Remove water seal (10) from shaft (3) and discard the water seal. It can be difficult to remove the water seal. Leave the water seal in position until shaft (3) is pressed out of the pump body.Note: The gear for the auxiliary water pump is a pressed fit. If the gear is removed, replace shaft (3) and bearing (4). Also, replace bearing (6) .
Use tool (A) to remove gear (1). Check the gear for damage or for wear. Remove snap ring (2) from the pump body.
Support the drive end of the pump body. Press out shaft (3). Press out bearing (4). Also, press out bearing (6) and seal (7). Remove two spacers (5) and discard the shaft, spacers, bearings, and the seal.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D5K XL & LGP Track Type Tractors JLF00001-UP (MACHINE) POWERED BY C4.4 Engine »
278-2360
SEGMENT GP-SPROCKET
D5K2 XL & LGP Track Type Tractor KWW00001-UP (MACHINE) POWERED BY C4.4 Engine »
278-2360
SEGMENT GP-SPROCKET
D5K2 XL & D5K2 LGP Small Track Type Tractor KW200001-UP (MACHINE) POWERED BY C4.4 Engine »
278-2360
SEGMENT GP-SPROCKET
D5K2 XL & D5K2 LGP Small Track Type Tractor WT300001-UP (MACHINE) POWERED BY C4.4 Engine »
278-2360
SEGMENT GP-SPROCKET
Caterpillar parts catalog:
Parts segment Caterpillar catalog:
2589791
SEGMENT GP-SPROCKET
D5K LGP, D5K2 XL
D5K LGP, D5K2 XL
2589788
SEGMENT-SPROCKET
D5K LGP, D5K2 XL
D5K LGP, D5K2 XL
2782358
SEGMENT-SPROCKET
D5K LGP, D5K2 XL
D5K LGP, D5K2 XL
2782359
SEGMENT-SPROCKET
D5K LGP, D5K2 XL
D5K LGP, D5K2 XL
2589791
SEGMENT GP-SPROCKET
D5K LGP, D5K2 XL
D5K LGP, D5K2 XL
1524867
SEGMENT AS-TIRE
216, 228
216, 228
8R9379
SEGMENT-RING
65C, 75C, 75D, 85C, 85D
65C, 75C, 75D, 85C, 85D
3273509
SEGMENT GP-SPROCKET
D7E, D7E LGP
D7E, D7E LGP
2782357
SEGMENT GP-SPROCKET
D3K XL, D3K2 LGP, D4K XL, D4K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL