SEGMENT 2782376 - Caterpillar

Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01172507
Attach a suitable lifting device to main control valve (1). The weight of main control valve (1) is approximately 181 kg (400 lb).
Position main control valve (1) .
Install bolts (13) (not shown).
Illustration 2 g01172506
Connect hose assemblies (12) to the main control valve.
Illustration 3 g01172499
Connect lower hose assemblies (11) to main control valve (1) .
Illustration 4 g01172498
Connect hose assemblies (10) into main control valve (1) .
Illustration 5 g01172497
Connect upper hose assemblies (9) into main control valve (1) .
Illustration 6 g01172496
Connect hose assembly (8) .
Connect harness assemblies (7) .
Illustration 7 g01172494
Connect hose assemblies (6) .
Illustration 8 g01172492
Connect hose assemblies (5) .
Connect hose assembly (4) .
Illustration 9 g01172490
Connect five tube assemblies (2) into main control valve (1) .
Install five tube assemblies (2) onto bracket (3) .
Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Lubrication Viscocities and Refill Capacities".