3633569 SEGMENT-SPROCKET Caterpillar parts
D6K LGP, D6K2, D6K2 LGP, PL61
Rating:
Alternative (cross code) number:
CA3633569
363-3569
3633569
CA3633569
363-3569
3633569
Weight: 26 pounds 12 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$260.77
16 Oct 2019
-: -
Genuine Cummins 3633569 TUBE,CPR WATER OUTLET
Genuine Cummins 3633569 TUBE,CPR WATER OUTLET || Factory Direct Shipped Genuine OE Item || Availabilty is subject to change without notice || If needed immediately, please contact us for availability before purchasing
Genuine Cummins 3633569 TUBE,CPR WATER OUTLET || Factory Direct Shipped Genuine OE Item || Availabilty is subject to change without notice || If needed immediately, please contact us for availability before purchasing
Number on catalog scheme:
3
For full view, you need register
3633569
Images:
Compatible equipment models: 3633569:
Information:
Inlet and Exhaust Valve Seat Inserts
Table 2
Required Tools
Tool Part Number Part Description Qty
F 1P-0510 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g01354361
Cool valve seat inserts (11). Install valve seat inserts (11) with Tooling (F) .
Illustration 5 g00598233
The orientation of the valve seat inserts is shown in Illustration 5.Valve Train Bridge Dowels
Table 3
Required Tools
Tool Part Number Part Description Qty
G 6V-4009 Dowel Driver 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 6 g01051069
Use Tooling (G) to install bridge dowels (8). The bridge dowels must extend 66.5 0.5 mm (2.62 0.02 inch) above the surface of the cylinder head.Inlet and Exhaust Valves
Table 4
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 7 g00618922
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Place clean engine oil on valves (7) and install valves (7) in the cylinder head.
Install seal (6), inner spring (4), outer spring (5), and valve rotator (3) on the valve stem and the valve guide.
Compress the valve spring with Tooling (A) and install retainer lock (2) .
If the valve locks are not positioned correctly, the locks can be expelled when the spring pressure is released.To help prevent personal injury, stay away from the front of the valve retainer and springs. Ensure that the valve locks are positioned correctly.
Remove Tooling (A) and lightly tap the top of the valves with a hammer. This will ensure that the retainer locks are in the proper position.
Repeat Steps 1 through 4 for the remaining valves.End By: Install the cylinder head.
Table 2
Required Tools
Tool Part Number Part Description Qty
F 1P-0510 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g01354361
Cool valve seat inserts (11). Install valve seat inserts (11) with Tooling (F) .
Illustration 5 g00598233
The orientation of the valve seat inserts is shown in Illustration 5.Valve Train Bridge Dowels
Table 3
Required Tools
Tool Part Number Part Description Qty
G 6V-4009 Dowel Driver 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 6 g01051069
Use Tooling (G) to install bridge dowels (8). The bridge dowels must extend 66.5 0.5 mm (2.62 0.02 inch) above the surface of the cylinder head.Inlet and Exhaust Valves
Table 4
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 7 g00618922
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Place clean engine oil on valves (7) and install valves (7) in the cylinder head.
Install seal (6), inner spring (4), outer spring (5), and valve rotator (3) on the valve stem and the valve guide.
Compress the valve spring with Tooling (A) and install retainer lock (2) .
If the valve locks are not positioned correctly, the locks can be expelled when the spring pressure is released.To help prevent personal injury, stay away from the front of the valve retainer and springs. Ensure that the valve locks are positioned correctly.
Remove Tooling (A) and lightly tap the top of the valves with a hammer. This will ensure that the retainer locks are in the proper position.
Repeat Steps 1 through 4 for the remaining valves.End By: Install the cylinder head.
Caterpillar parts catalog:
Parts segment Caterpillar catalog:
3613978
SEGMENT GP-SPROCKET
D6K LGP, D6K2, D6K2 LGP
D6K LGP, D6K2, D6K2 LGP
2529136
SEGMENT GP-SPROCKET
D6K, D6K LGP, D6K XL, PL61
D6K, D6K LGP, D6K XL, PL61
3633571
SEGMENT GP-SPROCKET
D6K LGP, D6K2, D6K2 LGP, PL61
D6K LGP, D6K2, D6K2 LGP, PL61
3613976
SEGMENT-SPROCKET
D6K LGP, D6K2, D6K2 LGP
D6K LGP, D6K2, D6K2 LGP
3613977
SEGMENT-SPROCKET
D6K LGP, D6K2, D6K2 LGP
D6K LGP, D6K2, D6K2 LGP
3633570
SEGMENT-SPROCKET
D6K LGP, D6K2, D6K2 LGP, PL61
D6K LGP, D6K2, D6K2 LGP, PL61
3613977
SEGMENT-SPROCKET
D6K LGP, D6K2, D6K2 LGP
D6K LGP, D6K2, D6K2 LGP
3613976
SEGMENT-SPROCKET
D6K LGP, D6K2, D6K2 LGP
D6K LGP, D6K2, D6K2 LGP
572R II, 583T, 587R, 587T, D7R, D7R II, D7R XR, D8R, D8T, PL83, PL87
572R II, 583T, 587R, 587T, D7R, D7R II, D8R, D8T
2589793
SEGMENT-SPROCKET
D3G, D4G
D3G, D4G
D3G, D4G
2353195
SEGMENT AS
D6R III
D6R III
2643150
SEGMENT AS
D6R III
D6R III
2353203
SEGMENT AS
D6R III
D6R III
2654948
SEGMENT
D6R III
D6R III
2589795
SEGMENT-SPROCKET
D6R III, D6T
D6R III, D6T
3633570
SEGMENT-SPROCKET
D6K LGP, D6K2, D6K2 LGP, PL61
D6K LGP, D6K2, D6K2 LGP, PL61