SEGMENT GP-SPROCKET 3633571 - Caterpillar

Illustration 2 g01364671
Use a suitable lifting device in order to position cooling system package (12) on the machine. The weight of cooling system package (12) is approximately 397 kg (875 lb).
Illustration 3 g01364674
Install mounting bolts (27) on both sides.
Illustration 4 g01364676
Connect hose (26) to the bottom of the radiator.
Illustration 5 g01364685
Install clip (25) .
Install bracket (24) .
Illustration 6 g01364681
Install tube assembly (23) .
Install clamp (22). Tighten clamp (21) to a torque of 22 3 N m (16 2 lb ft).
Illustration 7 g01364679
Install bolts (20) .
Connect harness assembly (19) .
Position bracket assembly (18) and install bolts (17) .
Illustration 8 g01364677
Connect harness assembly (16) .
Illustration 9 g01364670
Illustration 10 g01364669
Position brace (15) and install bolts (14) and (16) .
Illustration 11 g01364686
Install plate (13) .
Illustration 12 g01208590
Reposition hose (11). Connect hose (11) .
Illustration 13 g01208589
Reposition hose (9). Connect hoses (9) and (10) .
Illustration 14 g01364665
Connect hose assemblies (8), (7), and (6) to fan motor (5). Tighten hose assemblies (8) and (6) to a torque of 76 4 N m (56 3 lb ft). Tighten hose assemblies (7) to a torque of 108 10 N m (80 7 lb ft).
Illustration 15 g01364664
Install bracket (3) and bolts (4) .
Install tube assembly (1) and clamp (2). Tighten clamp (2) to a torque of 22 3 N m (16 2 lb ft).
Fill the engine with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Fill the system with hydraulic fluid. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".End By: Install the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Install".