SEGMENT-SPROCKET 4336739 - Caterpillar

Illustration 6 g00636162
Illustration 7 g00636164
Remove pin (16) from head (8).
Remove piston rod (11) from head (8).
Remove piston rod (14) from head (8).
Use Tooling (A) in order to remove bearing cup (17) from head (8).
Illustration 8 g00636166
Remove bearing (19). Remove shims (18) that are underneath the bearing. Remove plate (20) from the pump group. Remove two pins (Z) from the pump housing.
Illustration 9 g00636167
Remove four bolts (24). Remove two locking plates (23) and remove two spacer plates (22) from swashplate (21).
Illustration 10 g00636168
Remove plug (25) and remove the O-ring seal from housing (3).
Remove rotating group (26) and remove shim kit (27) from housing (3).
Illustration 11 g00636169
For assembly purposes, place identification marks on nine pistons (28). The position of the identification marks should correspond to the position of barrel (29) and plate (30). Remove nine piston assemblies (28) and remove plate (30) from barrel (29).
Illustration 12 g00636170
Illustration 13 g00636171
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
Use Tooling (D) and use a press in order to compress spring (33). Use Tool (B) in order to remove retaining ring (31) from barrel (29).
Remove retaining ring (31). Remove spacer (34). Remove spring (33). Remove spacer (32) from barrel (29).
Illustration 14 g00636172
For assembly purposes, note the orientation of swashplate (21) in relationship to housing (3). Remove swashplate (21). Remove shaft (36) and bearing (35) from housing (3).
Illustration 15 g00636173
Remove bearing (35) from shaft (36).
Illustration 16 g00636175
Remove shield (37) from the housing.
Illustration 17 g00636176
Use Tool (B) in order to remove retaining ring (38) from the housing. Remove lip seal (39) from the housing.
Illustration 18 g00636177
Remove two screws (42). Remove bearing (40) and remove bearing (41) from housing (3).
Illustration 19 g00636178
Use Tooling (C) in order to remove roller bearing cup (43) from the housing.