SEGMENT GP-SPROCKET 7G7212 - Caterpillar

Illustration 1 g03088677
Table 1
Specification for 6V-2455 Speed Sensor Gp
Item Qty Part Specification Description
- - - Use the following procedure to tighten the engine speed sensor:
- - - 1. Install the engine speed sensor into the 5/8 threaded hole and turn until the magnetic core contact with a tooth of the flywheel ring gear.
- - - 2. Back out 180 degrees and tighten the locknut (1).
- - - Tighten the locknut (1) to 25 5 N m (19 4 lb ft).
- - - The clearance between the engine speed sensor and the flywheel ring gear is 0.56 to 0.84 mm (0.022 to 0.033 inch).