SEGMENT-SPROCKET 7T1241 - Caterpillar

Illustration 1 g03493608
Table 1
Specification for 297-7342 Hoe Stick Gp
Item Qty Part Specification Description
- All the bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the bores for the pins, the bucket, and the cylinder pin bores.
1 The stick cylinder must be assembled in order to orient the grease zerk, as shown in Illustration 1.
2 1 367-1444 Pin As Diameter is 119.85 0.04 mm (4.718 0.002 inch).
3 1 367-1436 Pin As Diameter is 129.85 0.04 mm (5.112 0.002 inch).
4 2 9X-4597 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
Install the dust seal so that the lip faces outside, as shown.
Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
5 2 9X-4600 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
Install the dust seal so that the lip faces outside, as shown.
Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
6 2 9X-4601 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
Install the dust seal so that the lip faces outside, as shown.
Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
7 2 234-3748 Bushing(1) Bore before assembly is 140.38 0.04 mm (5.527 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
8 As required, use the following shims to adjust the maximum lateral clearance to 1.0 mm (0.04 inch):
1 147-3957 Shim Thickness is 0.5 mm (0.02 inch).
2 093-0074 Shim Thickness is 1.0 mm (0.04 inch).
1 093-0106 Shim Thickness is 2.0 mm (0.08 inch).
9 As required, use the following shims to adjust the maximum lateral clearance to 1.0 mm (0.04 inch):
1 151-0653 Shim Thickness is 0.5 mm (0.02 inch).
2 093-0076 Shim Thickness is 1.0 mm (0.04 inch).
1 093-0108 Shim Thickness is 2.0 mm (0.08 inch).
10 2 7Y-9914 Bushing(1) Bore before assembly is 100.29 0.02 mm (3.948 0.001 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
11 2 234-3749 Bushing(1) Bore before assembly is 130.36 0.04 mm (5.132 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
(1) Install the bushing in the bore so that the part number of the bushing is facing outward.