SEGMENT 8C3936 - Caterpillar

Introduction
This Special Instruction provides information for the installation of the 317-4371 Hook Gp (Flat Back) on the above listed work tools.Parts List
Illustration 1 g01585334
317-4371 Hook Gp (Flat Back)
Table 1
317-4371 Hook Gp (Flat Back)    
Item    Qty    Description    
(1)     8     U-Bolt    
(2)     1     Hook AS - LH    
(3)     1     Hook As - RH    
(4)     16     Lockwasher    
(5)     16     Hard Washer    Note: This is a custom product that is available from Caterpillar Work Tools.Installation
Illustration 2 g01585317
Typical example
Inspect the hooks.
Illustration 3 g01585376
(A) 271 mm (10.67 inch) (2) Hook As - LH (3) Hook As - RH
Install each hook 271 mm (10.67 inch) from the middle of the frame. Refer to illustration 3.Note: The weight of each hook is approximately 73 N m (54 lb ft).Note: There is a left hand and a right hand hook.
Secure the hooks with the supplied hardware. The required torque for the U-bolts is 100 20 N m (74 15 lb ft).