1193401 SENDER-TEMPERATURE Caterpillar parts
M312, M315
Rating:
Alternative (cross code) number:
CA1193401
119-3401
1193401
CA1193401
119-3401
1193401
Weight: 0.07 pounds 0 kg.
Information:
MOUNTING THREAD
.62-18
TERMINAL SIZE/TYPE
BLADE
TUBE LENGTH
0015.000
mm
WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$56.99
09 Jun 2020
-: -
DESITEUS New N42/N46 Camshaft Engine Setting Timing Locking Tool Kit
This timing locking tool set is ideal for timing and adjustment of the twin camshaft on gasoline engines. || It is also ideal for removing, installing and aligning of vanos unit. This tool set is crafted by hardened and tempered carbon steel, ensuring its maximum durability for years of use. || All tools are well stored in a sturdy case for easy transport. Delivery Includes (BMW OEM-number below for your reference):1 pc Fixing bridge cam = OEM 1192911 pc Fixing angle camshafts = OEM 1192921 pc Fixing screw = as OEM 1192931 pc Camshaft rotation key = as OEM 1192701 pc Fixing strip encoder wheels = same as OEM 1193501 pc Clamping tool = like OEM 1193401 pc Crankshaft staking shaft (straight) = as OEM 1123001 pc Crankshaft stakeout shaft (angled) = as OEM 119190
This timing locking tool set is ideal for timing and adjustment of the twin camshaft on gasoline engines. || It is also ideal for removing, installing and aligning of vanos unit. This tool set is crafted by hardened and tempered carbon steel, ensuring its maximum durability for years of use. || All tools are well stored in a sturdy case for easy transport. Delivery Includes (BMW OEM-number below for your reference):1 pc Fixing bridge cam = OEM 1192911 pc Fixing angle camshafts = OEM 1192921 pc Fixing screw = as OEM 1192931 pc Camshaft rotation key = as OEM 1192701 pc Fixing strip encoder wheels = same as OEM 1193501 pc Clamping tool = like OEM 1193401 pc Crankshaft staking shaft (straight) = as OEM 1123001 pc Crankshaft stakeout shaft (angled) = as OEM 119190
$54.88
30 Dec 2019
-: -
vidaXL Auto Petrol Engine Setting Locking Timing Tool Kit Compatible for BMW N42 N46 Z4 E46 1.8 2.0 E87 E90
This timing locking tool set is ideal for timing and adjustment of the twin camshaft on gasoline engines. || It is also ideal for removing,installing and aligning of vanos unit.This tool set is crafted by hardened and tempered carbon steel,ensuring its maximum durability for years of use.All tools are well stored in a sturdy case for easy transport. || Delivery Includes (BMW OEM-number below for your reference):1 pc Fixing bridge cam = OEM 1192911 pc Fixing angle camshafts = OEM 1192921 pc Fixing screw = as OEM 1192931 pc Camshaft rotation key = as OEM 1192701 || pc Fixing strip encoder wheels = same as OEM 1193501 pc Clamping tool = like OEM 1193401 pc Crankshaft staking shaft (straight) = as OEM 1123001 pc Crankshaft stakeout shaft (angled) = as OEM 119190 || We are shipping from united states, the shipping time usually cost 3-5 business days.
This timing locking tool set is ideal for timing and adjustment of the twin camshaft on gasoline engines. || It is also ideal for removing,installing and aligning of vanos unit.This tool set is crafted by hardened and tempered carbon steel,ensuring its maximum durability for years of use.All tools are well stored in a sturdy case for easy transport. || Delivery Includes (BMW OEM-number below for your reference):1 pc Fixing bridge cam = OEM 1192911 pc Fixing angle camshafts = OEM 1192921 pc Fixing screw = as OEM 1192931 pc Camshaft rotation key = as OEM 1192701 || pc Fixing strip encoder wheels = same as OEM 1193501 pc Clamping tool = like OEM 1193401 pc Crankshaft staking shaft (straight) = as OEM 1123001 pc Crankshaft stakeout shaft (angled) = as OEM 119190 || We are shipping from united states, the shipping time usually cost 3-5 business days.
Number on catalog scheme:
7
For full view, you need register
Information:
B-Series
Illustration 26 g02011953
B-series models (E) Pilot manifold (8) 169-7510 Hose As
Connect the other end of hose (8) to the pilot manifold.Installation Procedure for the Electrical Components
Switch Installation
Note: This option uses parts that are supplied in this kit.
Illustration 27 g01263792
Remove the cover panel for the start switch.
Illustration 28 g01263801
Determine the position of the switch (40) on the console. Drill a 12 mm (0.472 inch) hole in the console. Drill a 3 mm (0.118 inch) hole for the second hole. Install the switch (40) and the plate (10) into the console.Installation of the Wire Harness
Lay out the wiring harnesses, 173-3714 Wiring Harness (Long) (12) and 173-3713 Wiring Harness (Short) (11) .
Illustration 29 g00678430
(40) 7N-2353 Toggle Switch
Connect the short wiring harness (11) to the toggle switch. Connect the green wire to the terminal that is identified by the number 3. Connect the yellow wire to the terminal that is identified by the number 2.
Illustration 30 g01263838
View of relay terminal on start switch
Connect the yellow wire from the toggle switch to the relay terminal of the start switch.
Illustration 31 g01263860
Connect the long harness (12) to the valve group (14). Route the long harness through the engine compartment along the frame. Secure the harness with cable straps.
There is a black ground wire on the long harness. Connect the black wire to a suitable ground.
Illustration 32 g01263864
Route the long harness through the floor of the cab. Secure the harness with cable straps.
Connect the black wire of the short harness to the black wire of the long harness.
Connect the green wire of the short harness to the green wire of the long harness.
Install the covers that were removed.Program the Machine
When you are installing a work tool on an excavator for the first time, properly set up the electronic portion of the electrohydraulic system, and properly set up the hydraulics.The coupler will not function correctly unless the machine is programmed. Refer to the following document that is available on the Service Information System (SIS).ReferenceTesting and Adjusting, RENR7389, "320D, 321D, 323D, 324D, 325D, 328D, and 330D Excavators Tool Control System ", "Process for Setting Up the Work Tool"Check the System
After the electrical system and the hydraulic system are connected, check the system for proper operation. Refer to the Operation and Maintenance Manual, SEBU7309 for more information.Note: The pressure setting for relief valve (CC) is 17200 kPa (2500 psi). Refer to illustration 33.
In order to purge the air from the hydraulic lines, use the following steps:
Place a suitable container beneath the coupler.
Loosen the hydraulic fittings at the cylinder.
Start the engine of the host machine.
Move the switch for the coupler to the LOCK position. Hold the switch in the LOCK position until all of the air is purged from the hydraulic line. Move the switch to the CENTER position.
Move the switch to the UNLOCK position. Hold the switch in the UNLOCK position until all of the air has been purged from the hydraulic line. Move the switch to the CENTER position.
Tighten all of the fittings.Note: Dispose of the oil in a proper
Illustration 26 g02011953
B-series models (E) Pilot manifold (8) 169-7510 Hose As
Connect the other end of hose (8) to the pilot manifold.Installation Procedure for the Electrical Components
Switch Installation
Note: This option uses parts that are supplied in this kit.
Illustration 27 g01263792
Remove the cover panel for the start switch.
Illustration 28 g01263801
Determine the position of the switch (40) on the console. Drill a 12 mm (0.472 inch) hole in the console. Drill a 3 mm (0.118 inch) hole for the second hole. Install the switch (40) and the plate (10) into the console.Installation of the Wire Harness
Lay out the wiring harnesses, 173-3714 Wiring Harness (Long) (12) and 173-3713 Wiring Harness (Short) (11) .
Illustration 29 g00678430
(40) 7N-2353 Toggle Switch
Connect the short wiring harness (11) to the toggle switch. Connect the green wire to the terminal that is identified by the number 3. Connect the yellow wire to the terminal that is identified by the number 2.
Illustration 30 g01263838
View of relay terminal on start switch
Connect the yellow wire from the toggle switch to the relay terminal of the start switch.
Illustration 31 g01263860
Connect the long harness (12) to the valve group (14). Route the long harness through the engine compartment along the frame. Secure the harness with cable straps.
There is a black ground wire on the long harness. Connect the black wire to a suitable ground.
Illustration 32 g01263864
Route the long harness through the floor of the cab. Secure the harness with cable straps.
Connect the black wire of the short harness to the black wire of the long harness.
Connect the green wire of the short harness to the green wire of the long harness.
Install the covers that were removed.Program the Machine
When you are installing a work tool on an excavator for the first time, properly set up the electronic portion of the electrohydraulic system, and properly set up the hydraulics.The coupler will not function correctly unless the machine is programmed. Refer to the following document that is available on the Service Information System (SIS).ReferenceTesting and Adjusting, RENR7389, "320D, 321D, 323D, 324D, 325D, 328D, and 330D Excavators Tool Control System ", "Process for Setting Up the Work Tool"Check the System
After the electrical system and the hydraulic system are connected, check the system for proper operation. Refer to the Operation and Maintenance Manual, SEBU7309 for more information.Note: The pressure setting for relief valve (CC) is 17200 kPa (2500 psi). Refer to illustration 33.
In order to purge the air from the hydraulic lines, use the following steps:
Place a suitable container beneath the coupler.
Loosen the hydraulic fittings at the cylinder.
Start the engine of the host machine.
Move the switch for the coupler to the LOCK position. Hold the switch in the LOCK position until all of the air is purged from the hydraulic line. Move the switch to the CENTER position.
Move the switch to the UNLOCK position. Hold the switch in the UNLOCK position until all of the air has been purged from the hydraulic line. Move the switch to the CENTER position.
Tighten all of the fittings.Note: Dispose of the oil in a proper
Caterpillar parts catalog:
Parts sender Caterpillar catalog:
205B, 206B, 211B, 212B, 213B, 214B, 224B, M312, M315, M318, M320
1127178
SENDER-FUEL LEVEL
M312, M315, M318, M320
M312, M315, M318, M320
1686625
SENDER
M312, M315, PS-500
M312, M315, PS-500
1127178
SENDER-FUEL LEVEL
M312, M315, M318, M320
M312, M315, M318, M320
205B, 206B, 211B, 212B, 213B, 214B, 224B, M312, M315, M318, M320
205B, 206B, 211B, 212B, 213B, 214B, 224B, M318, M320
1124009
SENDER-TEMPERATURE
312, 312B L, 312C, 315, 315B L, 317
312, 312B L, 312C, 315, 315B L, 317
311, 3116, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 314C, 315, 315B, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320N, 321B, 321C, 322...
916, 926, 936, 936F, C-9, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CB-634, CB-634C, CP-563, CS-643, G936, IT18B, IT28, IT28B
1200667
SENDER-TEMPERATURE
301.5, 302.5, 303.5, 304.5
301.5, 302.5, 303.5, 304.5
2059093
SENDER AS
301.5
301.5
1553139
SENDER AS
301.5
301.5
311, 311B, 311C, 312, 312B, 315, 315B, 315C, 317B LN, 318B, 318C, 320 L, 320B, 320B L, 320C, 320C FM, 320N, 321B
0964643
SENDER-TEMPERATURE
307, 307B, 308C, 313B, 314C, E110B, E120B, E140, E200B, E240C, E300B, E70B, EL240B
307, 307B, 308C, 313B, 314C, E110B, E120B, E140, E200B, E240C, E300B, E70B, EL240B